WiFi connection. How to make wi-fi at home? We connect the router to the computer

Today, most modern apartments and houses are equipped with wireless wifi, which allows you to freely access the Internet to all computers and mobile gadgets. If you do not yet have Wi-Fi at home, then most likely you have opened this article to correct the situation.
So what is needed for WiFi connections Houses? Below we will consider the main stages, where, in fact, you need to start in order to set up a demon at home. wired Internet.

What do you need to connect Wi-Fi at home?

Step 1: conclusion of an agreement with the provider

This step can be skipped if you already have Internet connected at home, but it works exclusively by wire.

Today, Russian providers offer users three types of Internet connections: ADSL, FTTB and xPON.

You can check whether your house is connected to the services of a particular provider on the official website, where, as a rule, there is a page for checking the connection by house number. The situation is such that even in large Russian cities, on sparsely populated streets, there is no provider’s equipment in the houses, which means that the only option – use of ADSL, which is offered by the operator (aka provider) of telephone communications.

As a rule, the provider's website offers to choose one of the desired tariffs, each of which differs in the available Internet speed and additional features. So, as a rule, the cheapest tariff will provide limited speed Internet connections during the day and unlimited at night.
An expensive tariff will provide Internet without restrictions, but will also allow you to connect IP-TV with the provision of a certain number of free HD channels.

The choice of tariff is made solely on the basis of your financial capabilities and preferences. But we draw your attention to the fact that if you are not going to purchase a separate Wi-Fi router, see that it is provided free of charge by the provider at the selected tariff.

Having chosen a tariff, you will usually be asked to either make a call to the provider, or fill out a form to call a specialist.

Further, at the agreed time, a specialist comes to you, who concludes a service agreement with you, provides equipment, and immediately connects it (the task is easier if the provider provides its own router).

Step 2: Purchasing a Wi-Fi Router

In the event that you have a wired Internet connection or if you were not provided with this equipment when concluding an agreement with the provider, you must purchase it separately.

If you purchase a router separately, then this task must be approached with all responsibility, taking into account many nuances when choosing. About how to choose the right wifi router for the home, previously already described on our website.

Step 3: Connecting the router to the computer

So, you have everything to set up the Internet - all that remains is to set it up. Until the router is configured, Wi-Fi will not work on it. You must first connect the router to the computer.

In the modern age of the Internet, it is in almost every family. The World Wide Web braided with its numerous sites, forums and social networks the whole world. And for sure, in addition to the usual desktop computer, you have several more high-tech devices at home from which Internet access is also possible. However, how to set it up without entangling the apartment with kilometers of endless wires? Today we will talk about how to make wifi at home.

These four letters entered our everyday life not so long ago, but are already familiar to everyone who deals with computers. In fact, this is an adapter for wireless access to the Internet from almost any device on which it is installed. Conveniently? More than. Judge for yourself, because you will have complete freedom of movement around the apartment without fear of hurting or damaging a wire or cable. After all, the range of this device usually reaches 100 meters. Enough even for the royal mansions. Do you want to learn how to make wi-fi at home? Then read on.

There are several ways to create a wireless Internet access point in your apartment. The simplest is the acquisition of a special modem, which already contains (in other words, a router). By making such a purchase, you save yourself in advance from the need to connect additional equipment and all the associated difficulties. The settings of such a device also do not contain anything supernatural.

How to create wi-fi on your own without using additional devices? If you have a smartphone or laptop on hand that already has an Internet connection (in the first case, this may be mobile network, and in the second - a 3G modem), then they may well serve as a source of wi-fi. It will be enough to specify in the device settings the possibility of using it as an access point.

How to make wi-fi in your apartment if you already have an Internet connection through regular computer(namely its network card)? Here you will already need to purchase an additional device - a router. It is this box, small in size, that will distribute the available Internet over the air. However, connecting may take some time and cause problems. This is especially true for those who can not call themselves a specialist in this field. Below is the maximum detailed instructions to a standard modem.

The peculiarity of the router is such that from now on it is this device that will be connected to the Internet, and not a computer, as it was before. The appropriate cable will be connected to it. through a router? First of all, you will need to connect it correctly. The cable that used to provide an Internet connection must be inserted with the free end into the device. Do it through the connector labeled WAN, which is very important for correct operation router. The cord that originally came with the device must have two plugs at its ends at once. One of them connects to network map your PC (where the Internet cable used to be), the second one is inserted into the router, but already into the LAN1 type connector. As a matter of fact, the technical part of the process is over, the device is ready for use. It remains only to write everything necessary settings, and we can assume that we still answered the question of how to make wi-fi at home.

Do not forget that there may well be power surges in the electrical network. If you regularly observe this in your apartment, then you should purchase a source uninterruptible power supply(UPS). It will protect your equipment from possible damage.

Don't forget to password-protect your Wi-Fi hotspot as well. Otherwise, everyone within the coverage radius of the router will be able to use your precious Internet. In addition, it will significantly reduce your data transfer speed. So this is the main sign that someone uses the router on an equal basis with the owner.

How to make WI-FI at home

V modern world there are practically no people left who do not know what the Internet is. Most often in apartments laid wired modem, which is directly connected to the computer. But what if you have more than one computer in your apartment, but several, but you want to make sure that they connect to the Internet at the same time? To solve this issue, you should figure out how to make WI-FI at home. To create this type of wireless network, you will need to purchase a special device called a router, or router.

When do you need to create a wireless network at home?

1) If you just made repairs, so your plans do not include breaking walls and laying cables.

2) You need to know how to set up WI-FI if you live in a big house and want to connect a lot various devices: laptops, computers, phones and tablets.

3) You like to lie on the couch with a laptop, and not sit at a laptop computer.

Disadvantages of Wireless Networks

1) All wireless networks are very sensitive to interference.

2) The connection speed very often floats.

3) The connection breaks.

How to make WI-FI at home - connecting a router

We unpack the purchased router, connect it to the network. Connect a network cable to the Internet port. Now take a laptop Personal Computer and start the installation wireless network. You can also enable wireless adapter, then wait for the launch automatic installation. Most manufacturers set the value of the network identifier to “default”, therefore, among the entire list of networks, we are interested in this one. When analyzing the question of how to make WI-FI at home, one cannot fail to mention one very interesting point. If you found several networks with the id "default" and were able to connect to them, then congratulations! The fact is that one of your neighbors did not set a password, and you can use his Internet for free. After setting up the network, be sure to check the signal level at each point in the apartment. To do this, take a laptop and walk around the apartment. Figure out where the signal catches badly, and where it is good. To achieve a more or less uniform WI-FI signal, you need to put a router in the middle of your apartment. If you want the signal to be better in any room, then locate the router there.

How to make WI-FI at home - setting up a router

Before setting up the router, consider whether you have the strength to do the entire procedure yourself. If you doubt this, call the master. So, let's begin. We open any program that gives access to the Internet. V address bar write the following numbers: 192.168.0.1. This page - main page router. Next, we take the instructions that came with the router and set up the connection. The easiest way is to go to the router settings and click " Manual setting connections". Now you should register the identifiers of your computer, which you need to check with your provider or look in local connections and everything will work! Congratulations, now you figured out how to make WI-FY at home! Find a hotspot from your devices and enjoy your wireless connection!