How much is the screen on the ipad. How much does it cost to change the screen on the iPad. iPad screen replacement from YouDo specialists

Our customers who need to replace the display on their iPad are interested in such information mainly:

1. Where tablet repair can be done inexpensively.

2. How to distinguish between original parts and copies.

3. Where can I see the video replacement instructions.

In this article, we will provide the information you are looking for along with detailed video reviews.

Select model:

Important: Promotion! Reduced price by 50% marked with the word "Promotion", valid until the end of this month 1. As an iPad replacement from a copy; 2. We install original spare parts, and give a guarantee: 1 year! 3. 20-50% discount at the request of regular customers - see special 4. When repairing, choose free									Price installation details in our service center:
Name of spare parts	iPad 4, 3, 2	iPad Air	iPad Air 2	iPad mini 1.2	iPad mini 3	iPad mini 4	iPad Pro 9.7	iPad Pro 12.9	Price installations in rubles	Repair time without pressing (with pressure test + 4 hours)
Touch glass (original)	1980 Promotion! Promotion until Sunday	2990 Promotion! Promotion until Sunday	3900 Promotion! Promotion until Sunday	2790 Promotion! Promotion until Sunday	2950 Promotion! Promotion until Sunday	4900 Promotion! Promotion until Sunday	5900 Promotion! Promotion until Sunday	6900 Promotion! Promotion until Sunday	600	40 minutes
Display (original)	2890 Promotion!	3450 Promotion!	7900	2840 Promotion!	3400 Promotion!	8900	11900	12900	600	40 minutes
Touch glass (copy)	790	1190	1190	1390	1390				600	40 minutes
home button (body part)	980	980	980	980	980	980	980	980	600	40 minutes
home button (inside: cable with components)	860	860	860	860	860	860	860	860	600	40 minutes
Volume button flex	970	970	970	970	970	970	970	970	600	1 hour
Headphone cable	860	860	860	860	860	860	860	860	600	1 hour
SIM card cable	880	880	880	880	880	880	880	880	600	2 hours
Speaker	1280	1280	1280	1280	1280	1280	1280	1280	600	2 hours
Microphone	1190	1190	1190	1190	1190	1190	1190	1190	600	2 hours
Antenna	260	260	260	260	260	260	260	260	600	2 hours
Battery Promotion!	1980	1980	1980	1980	1980	1980	1980	1980	600	3 hours
Large iPad camera	860	990	990	990	990	990	990	990	600	40 minutes
small iPad camera	790	990	990	990	990	990	990	990	600	40 minutes
Power connector with cable	1300	1300	1300	1300	1300	1300	1300	1300	600	40 minutes
Power connector	1280	1280	1280	1280	1280	1280	1280	1280	600	40 minutes
WiFi Antenna	800	800	800	800	800	800	800	800	600	40 minutes
Wi-Fi module	1500	1500	1500	1500	1500	1500	1500	1500	600	from 2 hours
Power management chips	2290	2390	2390	2390	2390	2390	2390	2390	600	from 2 hours
pad	800	800	800	800	800	800	800	800	600	40 minutes
Back cover (case) Promotion!	2985	2985	2985	2985	2985	2985	2985	2985	1200	from 2 hours
Sim reader	890	890	890	890	890	890	890	890	600	2 hours

Become our regular customer and get a discount on our special .
Service center services
Installation of modules and components: display, speaker, case repair, etc.				from 100-900 rubles, from 20-50 minutes
Installation of radio elements: capacitor, diode, transistor, varistor, etc.				from 50-900 rubles, from 1 hour
Restoration of the printed circuit board (without replacing the radio elements)				from 200-800 rubles, from 1 hour
Installation of chips, controllers, etc.				from 600 rubles, from 1 hour
Recovery after moisture				from 900 rubles, from 1 hour
Firmware				900 rubles, 40 minutes.
Diagnostics and troubleshooting for free!

Video instruction: How to distinguish original spare parts from a copy. Which option is better.

Watching the video below will help you determine the quality of the components.

Video instruction for replacing the display on the iPad

In the above videos, we will talk about how the screen repair on the iPad goes.

Other videos you can watch in the section quality control

We have provided a description of the repair process in various video instructions. The repair itself can be carried out as follows:

1. The masters of our service center can change the screen - everything will be done with high quality, and based on the instructions you have viewed, you can control the quality.

2. If you choose self-repair, you can purchase everything you need from us.

In what cases do you need to change the screen on the iPad and in which the problem is not in the screen

• A 100% screen will have to be replaced if the display is broken, dark spots appear on it, or streaks appear.
• 90%, when the screen flickers, it has to be changed. In 10%, the problem is in other components.
• V 90% of the stripes on the display mean that it will have to be changed. In 10%, the microcircuit may fail.
• 90% if the screen is white, it changes. At 10% there is a malfunction in the controller.
• V 70% of the screen trembles, there are artifacts on it, in this case the part has to be changed. In 30%, the cause of the breakdown lies in the microcircuit.
• The backlight does not work, then the screen changes at 10%. In 90% the problem is different.

If you urgently need the correct, that is, safe, effective, inexpensive repair with original components, and even with a 1 year warranty, then contact our specialized Apple service center. Only in such professional repair establishments is the replacement iPad screen 4, 3, 2, Air, Air 2, mini 2, 3, Pro is on the highest level and on terms that are beneficial primarily to customers, or rather, with us:

• replacement of the iPad display is carried out using exclusively suitable, "native", original spare parts brought to the warehouse directly from the manufacturer's factory;
• the terms of repair of the gadgets in question are reduced to a minimum, quite often the operation of the device is resumed directly in the presence of its owner;
• prices for software and maintenance of iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro are reduced to the limit (read about it below);
• The one-year warranty is mandatory and unconditional.

Repair prices:

The prices for iPad screen repair in our unique Zhsmmoskov service center are so affordable and low that some customers seem untruthful. But believe me, such a cost can be perfectly combined with quality service, we will prove it to you in practice. To get started, take a look at the price list to get used to such cheap rates, and then come to us. You will be another lucky person who saved time and money, and in return received a perfect tablet touch glass restoration.

How to replace the iPad screen

To successfully replace the display on iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro, bring the defective device to service center Gsmmoscow, which is located at the address listed in the " Contact Information". You can also call a courier to your house for free to entrust the delivery of the device to him and not waste your time on it.

When the device in question is with us, the repair specialists will immediately begin to fulfill the order:

1. Without fail, they will first carry out the starting computer diagnostics. The proposed examination, as you already know, is not paid by our clients. The inspection will last from about twenty minutes, depending on the number of breakdowns found;
2. Then the information received is analyzed, the client is informed about the repair time (from half an hour) and the cost of services (see the price list):
   • in order to correctly and safely change a faulty screen glass or a complete display, you will have to spend about thirty minutes;
3. When all existing problems are eliminated, final control testing is carried out and a one-year warranty is issued;
4. About the cost of procedures, ask the consultants-operators of the hot telephone line or, if it is more convenient, read the price list.

Do you need an urgent display replacement?

Experienced service center staff will easily make urgent repair your iPad, just warn them about the rush. We promise that we will cope with the task in half an hour, no more. Often you have to change screens or touchscreens so quickly. By the way, you do not have to pay extra for efficiency.

Fair, not overpriced or understated. There should be prices on the Service website. Necessarily! without "asterisks", clear and detailed, where it is technically possible - the most accurate, final.

If spare parts are available, up to 85% percent of complex repairs can be completed in 1-2 days. Modular repairs take much less time. The site indicates the approximate duration of any repair.

Warranty and Liability

A warranty should be given for any repair. Everything is described on the site and in the documents. A guarantee is self-confidence and respect for you. A 3-6 month warranty is good and enough. It is needed to check the quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that you will be helped.

Half of the success in Apple repair is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts of current models so that you do not have to waste extra time.

Free diagnostics

This is very important and has already become a good form for the service center. Diagnosis is the most difficult and important part of the repair, but you should not pay a dime for it, even if you do not repair the device after it.

Service repair and delivery

Good service appreciates your time, therefore offers free shipping. And for the same reason, repairs are carried out only in the workshop of the service center: it can be done correctly and according to technology only at a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient in order to be in time before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Age and experience of the company

Reliable and experienced service is known for a long time.
If a company has been on the market for many years, and it has managed to establish itself as an expert, they turn to it, write about it, recommend it. We know what we are talking about, since 98% of incoming devices in the SC are restored.
We are trusted and passed on complex cases to other service centers.

How many masters in the directions

If you are always waiting for several engineers for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of immediately.
2. you give away macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, the specialist must answer it as accurately as possible.
To give you an idea of ​​what you need.
Will try to solve the problem. In most cases, from the description, you can understand what happened and how to fix the problem.

What mobile devices break most often? Those that they like to use are constantly in their hands and sometimes fall: mobile phones, smartphones and tablets. In percentage terms, among the tablets on hand, Apple is the most iPad different generations. Literally, a week ago I learned that the official Apple service does not repair devices, but exchanges for new ones with a surcharge. With this material, I begin a new series of repairs mobile devices Apole and more. Therefore, when giving an iPhone or iPad for repair, be aware that they will replace broken parts with non-original ones. The quality of the repair will depend not only on the master, but also on the selected parts, their prices.

How to replace a broken screen in Apple iPad 2 GSM 64 Gb? In this example, I will tell and show how to replace protective glass Apple iPad 2. I will explain how to replace the display if necessary, repair a broken Home button and a number of other elements. Repair of the Apple iPad 2 is similar to the repair of the Apple iPad New, the devices are assembled in the same case. Apple iPad WiFi easier to repair than the version with GSM and GPS module due to the lack of additional antennas.

It is advisable to turn off any device before starting repairs, protecting yourself from errors. But this is not always possible, for example, the screen area where the shutdown slider is located has stopped responding, or the Power button has broken. The considered case of iPad repair without turning off the device.

The iPad disassembles from the front. However, like the iPhone 3G and iPhone 5. First, you need to remove the protective iPad glass. The frame around the display is heated with a hairdryer to melt the factory glue, the temperature is about 140 degrees. Further, insert a scalpel or clerical knife into the lower right or upper right corner, slowly peel off the protective glass. When the gap is large enough to insert the second blade, insert it and slide it up or down the long edge. Instead of a scalpel, you can use ordinary plastic picks, working with plastic tools reduces the likelihood of damage to the device. The task is to go along the perimeter of the frame and stop in the lower left corner, there is a capacitive touch screen cable.

Peeling off the glass with a blade must be stopped a centimeter before the volume buttons so as not to damage the cable. Next, you need to peel the glass to the side home buttons, stop well for a centimeter. When the corner of the protective glass is torn off from the aluminum case, it must be pulled back to a noticeable tension. The protective glass in the iPad is durable, even with a significant bend it will not crack. In the gaps that appear, the cables will be visible, gently press them to the body and continue to unfasten the glass with a scalpel. Go to the lower left corner past the Home button.

After you return to the upper edge, behind the Power button you need to be extremely careful, there is a GSM antenna and its cable. It is necessary to peel off the glass by pressing the antenna to the body. Next GPS antenna, it is attached more securely than GSM, tear off the glass from it with a bold movement. The left side peels off without any special tricks, at this the first and most difficult stage has been completed.

If one of the cables is damaged when removing the protective glass, complicate your repair. It will be necessary to splice the halves of the train; or replace the entire module. For example, a GSM antenna and its cable that goes under the display.

Opening the iPad frees the display matrix and controls from captivity. The Home button is removed along with a broken protective glass. Second, you need to remove the iPad display. Unscrew a few screws in the corners of the matrix frame. Raise the display, find the latch for attaching the cable and open it by picking it up with a blade. Remove the cable from the connector, put the iPad display aside. If directly damaged Apple display iPad, change to a new one and collect everything back.

Third, remove the cable in the same way touch screen iPad. On a note, if you are repairing an included iPad, after the display and capacitive glass cables are removed, you cannot press the Home and Power buttons, the backlight in the device will turn off. By pressing these buttons, the Apple iPad sends a signal to the cables, their absence will give 0 and the tablet will stop working with them. There is nothing wrong with turning off the backlight, the repaired iPad will start working normally after a reboot.

How an iPad looks under x-rays doesn't give the same impression as a live opening of a tablet. The lion's share of the space in the iPad takes up accumulator battery. Batteries are glued tightly, their replacement is almost never required. Frequent breakdowns in the iPad are: the failure of the Home and Power buttons, the 30-pin connector. The device is so simple and elegant inside that there is nothing more to break mechanically. The Home button is removed when repairing a broken display, I will not consider it separately. In order to replace the Power button in the iPad, after removing the protective glass, you need to unscrew the two screws on the right side, disconnect the cable and change the button module.

Breakdowns and apple repair iPad, when the tablet got wet, damp, was flooded with water or drowned in this material, I will not consider it. Most often, for such a tablet repair, you need to remove the metal screens from the motherboard and solder the chips.

When the Apple iPad 2 and iPad New fall, it happens that the aluminum case is crumpled, most often the corner. It is necessary to evaluate whether the protective glass fits snugly into place. If not, then the jammed area of ​​\u200b\u200bthe case is ground with a file. After such an operation Apple device looks bitten off like a logo. During the repair process, the task was slightly changed: how to make a black iPad out of a white iPad. All color in the iPad is concentrated in a frame around the display. There is also white plastic in the frame of the case, in the 3.5 jack and 30-pin connector, not much to draw attention to.

Pay attention to the upper left corner and the upper edge of the Apple iPad 2 GSM, there are a GSM module and two antennas. The Wi-Fi version of the iPad does not have these items. In iPad 2, the sore point is the cable from the GSM modem to the motherboard. This 50-wire cable is mounted on a conductive adhesive, and peels off if it is hit or dropped. Damage to it is fraught with the following problems: iPad does not see sim card, GSM connection disappears, GPRS session is constantly interrupted, the tablet does not find GPS satellites. Replacing the plume is a complex operation; such repairs cannot be performed at home. The repair consists in replacing the cable with 50 soldered thin wires.

Fourth, remove the Home button from the old glass and apply it to the two contacts under the display. The operation of precise positioning of the button relative to the iPad case and the stele, so that the part does not move to the side during gluing. Double-sided tape is glued to the edges of the Home button, which lies on the contacts. A new glass is put in place and a button is glued to it. After that, the glass is removed along with the button.

Connect the cables of the display and the protective glass in place. The display is fixed with screws.

Fifth, for the repair of the iPad and other tablets, they invented and successfully sell 3M double-sided tape. The scotch tape has rounded edges, the rounding radius repeats exactly the radius of the corners of the iPad. Corners are glued into corners, longitudinal stripes on the edge of the tablet. Two drops of Super Moment Gel glue are added to the lower left corner, where the screen cable passes. Super Moment is needed to protect the loop from a break; iPad gets hot in direct sunlight and the glass may peel off.

Sixth, remove the film from the second side of the adhesive tape and attach the protective glass in place. On this iPad repair finished. Replacing the glass on an iPad takes about two hours of work if you know exactly what comes next.

When an iPhone 5 breaks down in St. Petersburg and gets repaired, you will be the first to know about it. Evgeny, an Apple repairman, has got his hands on all previous generations of the iPhone. Apple technology is simple and iPhone 5 repair does not bode well. I hope the new section "Service" about device repair will find its readers, then I can prepare new reviews and instructions. If you have any questions about repairing and replacing broken glass in iPad 2, then call +7 911 099 13 33 or write comments. We will try to respond promptly to everyone who has encountered a breakdown and iPhone repair. Website of our service and online store Approblem.net.

It happens that your iPad Pro tablet has stopped turning on, the touch screen does not work, or the screen is broken. In this case, you will need to replace the display ipad pro on new. Of course, you can give the device to the nearest service center, but it is much easier and more economical to replace it yourself by purchasing a screen module.

The causes of damage to the display of the iPad Pro can be:

• mechanical shocks;
• moisture penetration;
• placing heavy objects on top;
• failure of the microcircuit (mainly due to surges in the mains during charging);
• problems with the cable or printed circuit board;
• manufacturing defects.

Preparatory activities

Heat the thermal bag in the oven or microwave - the heating time should not exceed 30 seconds. When removing the thermal bag, try to take it by the edges. If you see that it is too swollen, do not touch it, as you may burn yourself. In general, the thermal bag retains its heat for 10 minutes. During disassembly of the device, you may need to warm up the device several times.

In case your glass is cracked, it is recommended to seal it with tape. The entire screen is glued to prevent fragmentation damage during parsing. In addition, such protection will ensure the correct disclosure of the tablet. Just in case, it is recommended to wear glasses.

What instrument to prepare?

To replace the display, you will need:

• 6 picks for opening;
• sucker;
• spatula-spudger;
• thermal bag for heating glue or hair dryer;
• screwdriver.

Before starting work, be sure to turn off the tablet. You should purchase a replacement part - the display assembly.

Replacing the ipad pro display: a detailed guide to action

1. The ipad pro has adhesive strips in different places. The next photo shows where the thickest layer of glue is. Knowing these places, you will need to vary the depth of penetration of the pick.
2. Place the thermal bag on the left edge of the iPad. Wait a few minutes for the glue to soften. In the absence of a thermal bag, you can use the warm air from a hair dryer.
3. Place the suction cup near the left edge of the tablet exactly in the middle.
4. While holding the corners of the iPad, pull up slightly a few times. Such a manipulation is performed in order to weaken the tightness of the gadget.

Once you see a small gap, insert a spudger or pick into it. The sharp part of the tool must not penetrate more than 2 mm, otherwise you risk damaging your tablet.

1. Position the thermal bag along the bottom left corner. After the glue has softened, insert a spudger near the pick and run it along the lower left edge. Remember, do not drive the tool deep. You may need additional warming up of this part of the device.
2. Insert a pick at the bottom left edge (closer to the corner), removing the spudger.
3. Warm up the top corner of the iPad by touching the front camera. Once the glue has softened, insert a spatula above the pick on the left corner and remove the remaining glue, moving up to the very corner.
4. Remove the spudger and insert the triangular plate as shown.
5. Now your task is to completely warm up the top of the iPad Pro. Insert spatula on short distance and move towards the front camera. Once you reach it, stop.
6. Immediately before front camera replace the spudger with a pick.
7. Warm up the top with a thermal bag again. After a few minutes, insert the spatula behind the front camera and walk it to the upper right corner. After removing the adhesive, replace the tool with a plastic plate.
8. To soften the glue, once again place a thermal bag on the right side of the device. Walk the spudger to the middle of the iPad (stop in front of the front camera). Replace the instrument with another pick.
9. Go a little lower and insert a spudger between the display and the back of the case. Swipe it down along the right edge, dropping down to the corner.
10. Once again, replace the instrument with a mediator. The location of the plastic is the lower right corner.
11. Using a thermal bag, soften the glue that connects the parts of the iPad from below. Insert the spatula again and walk it from the right corner to the center of the butt. At a distance of 1 cm from the "Home" button, you need to stop. If you do not do this and continue to walk with the tool, you can damage the cables. Remove your spudger and use the plastic triangle.
12. Turn the spatula to its thinnest edge and go directly under the button.
13. Having overcome the “Home” button, you can again drive the shoulder blade deep, clearing to the left end of the lower edge (the pick is already installed there).
14. Look at the diagram from point 1. Make sure that the areas with the thickest adhesive strips have been successfully peeled off. Otherwise, you will have to carry out additional cleaning of the adhesive using a thermal bag.

This iPad model has very short cables. Do not rotate the display around the bottom edge. Flex cables can also become unusable if the screen is raised 80 degrees.

You need to lift the display 60-70 degrees to get access to its individual parts.

1. You need to remove the battery as a short circuit may occur. To do this, you need to unscrew 9 screws (eight 1.2 mm and one 2.4 mm). Keep the display open and ensure that the display cables do not break during operation.
2. Raise the metal shield protecting motherboard. You will need to make some effort to remove the plate. During removal, it may be slightly deformed.
3. Unscrew the 1.8 screw covering the battery connector with a screwdriver.
4. Insert a battery blocker or any other tool on the motherboard and leave it there for isolation purposes until the repair is completed.
5. Remove the 3 screws above the display cable bracket (2.4mm and 1.2mm). Remove the metal plate.
6. Move the two cables away from their sockets on the motherboard.
7. Now you can remove the display. Be sure to remove all adhesive residue and install new adhesive strips.
8. Perform a screen replacement.
9. Reassemble in reverse order.