Huawei U8110 firmware. Improving operator phones. Firmware Huawei U8110 Firmware for Huawei u8110

Firmware is a collection of embedded software on a smartphone, tablet, or other digital device that is required for its normal operation. In the smartphone of their Huawei tablets, firmwares based on the Android operating system of various versions are mainly used, as well as the proprietary graphical shell Emotion UI.

How can I find out the current firmware version?

To clarify the current software version, you need to go to Settings - About phone / About tablet PC - System update. The version is three digits after the letter B.
For example, build number V100R001C00B122 means that you have 122nd firmware version installed. Any firmware with numbers greater than these is newer.

More about firmware versions:

So let's take a look at the firmware numbering for Huawei smartphones. For example, let's take the firmware from Huawei Ascend Mate - MT1-U06 V100R001C00B907.

As you probably guessed, MT1-U06 is the name of the device. MT1 is the main base, that is, Huawei Mate, U06 is the device revision. Devices come in different revisions, in this post I will not go into details of their designation, I will only say that the letter U is UMTS (normal 3G), and the letter C is the CDMA version. Devices with revision MT1-U06 are supplied to Russia.

CxxBxxxSPxx - This is the most important option in the firmware, it shows on which version of the "base" the firmware is assembled Bxxx - the numerical class of the base for the firmware SPxx - Service Pack number. The higher the Bxxx and SPxx, the newer the firmware. (Bxxx takes precedence over SPxx). Cxx is the region of the country.

Next, let's look at the firmware version itself - V100R001C00B907. V100 and R001 - basic version and firmware revision. They change in very rare cases, when there is a big change compared to the previous version of the firmware (for example, the transition from Android 2.x to 4.x). Even for Android 4.x versions, these values usually do not change.

C00B907 - for most new devices, the C00 value does not change anymore, but in general it means binding to the region. Now the region can be defined in the menu item "Special version" - CUSTC10B907.

So, for smartphones the region of Russia (channel / ru) is CUSTC10. The binding to the region can be easily changed with a special firmware file, in some official firmware there is an update.app file in the cust folder weighing several megabytes or kilobytes, which changes the region to Russia.

B907 is the firmware version itself. I think there is no need to explain that the higher it is, the newer the firmware is.

Where can I download the official firmware for my model?

Currently, most smartphones with original software without modified system firmware files come with FOTA updates (Over the Air). If you received root rights, or you have not yet received the update over the air, then you can independently download the current version of the firmware from the official website and install it manually.

Official Russian firmware:

You can download the current versions of the official Russian ones on the official consumer support website: http://consumer.huawei.com/ru/support/downloads/index.htm.

Enter the correct model name in English, such as Honor 5X, or the service model number, such as KIW-L21, to find the correct firmware.

In the Russian version of the firmware, there is full localization, a full set of Google Apps services, as well as pre-installed regional applications such as Yandex search, Odnoklassniki, Vkontakte, etc.

Official European firmware:

You can download the latest versions of the official global and European firmware on the official Emotion UI download site: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=list, as well as using the search on the consumer support portal: http: / /consumer.huawei.com/en/support/index.htm.

To search for the firmware on the emui.huawei.com portal, you must specify the service model number of your smartphone or tablet, which can be found in Settings-> About phone-> Model.

Searches on consumer.huawei.com support searches by full model name and service model name.

The official global firmware supports all major world languages, including Russian, as well as a pre-installed set of Google Apps.

Official Chinese firmware:

You can download the current version of the official Chinese firmware for your device on the official EMUI website: http://emui.huawei.com/cn/plugin.php?id=hwdownload, as well as using the search on the support portal: http: //consumer.huawei .com / cn / support / index.htm.

After selecting the desired model in the list on the firmware portal emui.huawei.com, you will be taken to the model card, where the latest firmware version is presented. To download it, click on the turquoise button with the hieroglyph.

Please note that by default, the Chinese firmware does not have Google Apps services, as well as the Russian language in the system settings.

After downloading the firmware, use one of the manual installation methods described below.

Installing and updating the firmware

Local update always deletes user-entered data and settings from the device memory. Before starting the software update using these methods,
We recommend that you make a backup copy of all data important for you through the backup application, as well as save other necessary information from the device's memory (for example, to a memory card).

With online or FOTA updates, user data is retained. Regardless, we also recommend that you back up before doing this.
update.

Before starting the procedure, make sure that the battery of your device is charged to at least 60%.

To connect Huawei smartphones and tablets to a PC, you need the HiSuite utility. Install it on your PC before starting the update.

What you need to know before updating your smartphone's firmware:

The firmware file must be named UPDATE.APP;
During a local firmware update, all data on the internal memory of your smartphone will be deleted!

Attention! Everything that you do with your device - you do at your own peril and risk! No one guarantees the correct operation of the device during and after the installation of third-party firmware and / or other actions not provided by the manufacturer!

Local firmware update:

Local update is used if the innovations are large-scale, in addition, this method restores the system to its original form and in
in most cases, eliminates the possibility of problems with increased battery consumption in the first days after the update.

Copy the UPDATE.APP file from the archive with the firmware to the dload folder on the memory card.
Go to the Settings-Memory-Software Upgrade menu and start the upgrade process (Settings-> Storage-> Software Upgrade-> SD card Upgrade-> Confirm-> Upgrade).
Wait until the end of the update process.

Force local update via 3 buttons:

This firmware update mode is emergency and will work even if the device does not boot normally.

Create a dload folder in the root directory of the SD card.
Copy the UPDATE.APP file to the dload folder on the memory card.
Turn off your smartphone.
Hold down the Volume Up + Volume Down keys and turn on the smartphone, while the Volume Up + Volume Down keys should remain pressed for ~ 5 seconds after pressing the power button.
Wait for the completion of the update process.

Over the Air Update (FOTA):

For this type of update, it is advisable to use a high-speed network connection, such as Wi-Fi.

To update in this way, you need to go along the path to the Settings - About phone - System update section and select the "Online update" item.
After that, the device will connect to the network and if the update is available - the Download button. After clicking it, the update files will be downloaded, then it will appear
Install button. When you press it, the device will reboot, install the update, and turn on normally. Service pack files will be removed
from memory automatically.

Please note that if the device has been elevated (root), recovery is installed different from the original, and the system has been modified with
using this elevation, updating in this way with a high degree of probability will end with an error and the phone after rebooting will turn on in the usual
mode.

Updating with HiSuite:

Download, install and update the HiSuite program to the latest version - a utility for synchronization, backup and much more from Huawei (contains ADB drivers).
For further flashing the phone, turn on USB debugging in the phone settings in the developer section.
Launch the HiSuite program on your computer.
We connect the phone using a USB cable in HiSuite mode.
When connected for the first time, HiSuite starts installing drivers on the computer and the Daemon program on the phone. (a shortcut for the HiSuite program will appear on the phone - this tells us about the successful installation of the drivers).
Select the EMUI ROM item in the HiSuite program.
If we DO NOT have a pre-downloaded firmware version, then select the Download ROM item, follow the link and download the firmware version we need from the site.
If we HAVE, or you just downloaded it, the firmware version, then select the Loading ROM item, we will be prompted to select the location of the firmware file. We find the file and confirm the choice.
The file upload process begins.
We are offered to save the phone data. We select the necessary backup items, if necessary, and confirm the choice, or refuse, if we believe that we already have saved data. After saving or refusing, select the NEXT item.
HiSuite starts the flashing process.

Important!

During the firmware process, do not disconnect the cable either from the phone or from the computer.
Don't touch the phone at all.
Do not switch to other processes on the computer.
Wait for the firmware to finish.
After the firmware has been flashed by the HiSuite program, the phone will reboot and enter the Recovery mode. A message about the start of the firmware by the phone itself will appear on a white screen.
We are waiting for the successful completion of the firmware in the form of a checkmark. The phone will reboot itself.
We turn off the phone and see a window about updating applications on it. We are waiting for the end of the operation.
We go into the settings and in the update point we are convinced of the version we have installed.

Possible errors during the update and how to fix them:

Q: When turned on with the volume buttons held down, the firmware process does not start.
A: Try to re-write the file with the firmware to the dload folder. If it still does not start, try starting the update process through the settings menu.

Q: The device has turned off and will not turn on.
A: Wait a few minutes. If it does not turn on, turn it on yourself, the process should go on normally.

Q: When updating, the process hangs at some point and does not go further.
A: Wait five to ten minutes. If the device continues to hang, remove and insert the battery. For devices with a non-removable battery, you need to press and hold (15 seconds) the power button and both volume buttons.

Tablet firmware update:

Only FAT32 format cards can be used. Less than 4 GB desirable;
The firmware must be located on the SD card in the dload folder;
You cannot use the built-in memory of the device (except for those devices where the Micro-SD slot is not provided);
The firmware file must be named update.zip;
During the firmware, the device will reboot several times - this is normal;
If there are several folders in the archive with the firmware (step1, step 2, etc.), then flash all the files in turn.

In order to install any original firmware, you need to do the following:

Copy the dload folder with all its contents to the root of the SD card;
Turn off your tablet;
Insert SD card if removed;
While holding the Volume Up key, press and hold the Power button until the screen blinks. The Volume Up button must be held until the installation process begins (a green robot and a filling progress bar appear);
Finally, when prompted to do so, remove the SD card or hold the Power button for 10 seconds.

Note: In some cases, you don't need to hold down the buttons at all and the process will start automatically after turning on / restarting.

If the upgrade process does not start, you need to open the calculator, enter () () 2846579 () () = and then select Project Menu Act -> Upgrade -> SD Card upgrade.

Attention!

Do not pull out the card or press the power button until the process is completed and a corresponding prompt appears on the screen;
If power is lost during the installation process, repeat the firmware process;
After copying the firmware to the sd card, check if it is damaged (copy the firmware files, unplug and then plug in the sd card, check that the * .zip files in the firmware open without errors on the computer).
Delete the firmware file from the SD card or rename the dload folder if you don't want to accidentally update your tablet again!

MegaFon U8110 runs under the operating system Android 2.1... Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights to MegaFon

Root on MegaFon U8110

How to get a root for MegaFon U8110 see instructions below.

Below are the universal programs for obtaining root rights for devices on Qualcomm Snapdragon

(PC needed)
(Route using a PC)
(popular)
(root in one click)

If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Specifications

Battery capacity: 1150 mAh
Battery type: Li-Ion
Talk time: 3.3h
Standby time: 280 h
Features: Accelerometer
Sales start date: 2010-11-01
Package contents: smartphone, battery, charger, portable stereo headset, USB interface cable, stylus, manual
Type: Smartphone
Weight: 110g
Control: navigation key
Body material: plastic
Operating system: Android 2.1
Case type: classic
Number of SIM-cards: 1
Dimensions (WxHxT): 57x106x14 mm
SIM card type: regular
Screen type: color TFT, 262.14 thousand colors, touch
Touchscreen type: resistive
Diagonal: 2.8 inches.
Image size: 320x240
Pixels Per Inch (PPI): 143
Automatic screen rotation: yes
Camera: 3.20 million pixels, 2048x1536, LED flash
Camera functions: digital Zoom 2x
Video recording: yes
Audio: MP3, AAC, WAV, WMA, FM radio
Headphone jack: 3.5mm
Interfaces: Wi-Fi, Bluetooth 2.0, USB
Standard: GSM 900/1800/1900, 3G
Satellite Navigation: GPS
Processor: Qualcomm MSM 7225, 528 MHz
Number of processor cores: 1
Built-in memory: 512 MB
RAM: 256 MB
Memory card slot: yes
Control: voice dialing, voice control
Speakerphone (built-in speaker): yes
Flight mode: yes

Firmware for MegaFon U8110

Official firmware Android 2.1 [stock ROM file] -
MegaFon custom firmware -

MegaFon U8110 firmware can be implemented in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. Unfortunately, the official MegaFon website will not help solve this problem, but we will solve it for free. This MegaFon model has Qualcomm MSM 7225, 528 MHz on board, respectively, there are such flashing methods:

Recovery - flashing directly on the device
A special utility from the manufacturer, or

We recommend the first method.

What custom firmwares are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and disadvantages of a smartphone from MegaFon and how to fix them?

If the U8110 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
Doesn't charge (usually iron problems)
Doesn't see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for MegaFon U8110

Instructions on how to Hard Reset MegaFon U8110 (reset settings). We recommend that you familiarize yourself with the visual guide, which is called on Android. ...

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-> go to Recovery
"Wipe data / factory reset"
"Yes - delete all user data" -> "Reboot System"

How to log into Recovery?

hold down Vol (-) [volume down], or Vol (+) [volume up] and the power button
a menu with the Android logo will appear. Everything, you are in Recovery!

Reset settings on MegaFon U8110 can be done in a very simple way:

Settings-> Recovery and reset
Reset settings (at the very bottom)

How to reset your pattern

How to reset the pattern if you have forgotten it and now you cannot unlock your MegaFon smartphone. On the U8110, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Official firmware Android 2.1 [stock ROM file] -
Huawei custom firmware -

If a custom or official firmware for Huawei has not yet been added here, then create a topic on the forum, in the section, our specialists will promptly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. Firmware for Huawei U8110 will also appear on this page. Please note that for this Huawei model, an individual ROM file is required, so you should not try firmware files from other devices.

What custom firmwares are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and disadvantages of a smartphone from Huawei and how to fix them?

If the U8110 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
Doesn't charge (usually iron problems)
Doesn't see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for Huawei U8110

Instructions on how to Hard Reset Huawei U8110 (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. ...

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-> go to Recovery
"Wipe data / factory reset"
"Yes - delete all user data" -> "Reboot System"

How to log into Recovery?

hold down Vol (-) [volume down], or Vol (+) [volume up] and the power button
a menu with the Android logo will appear. Everything, you are in Recovery!

Factory reset on Huawei U8110 can be done in a very simple way:

Settings-> Recovery and reset
Reset settings (at the very bottom)

How to reset your pattern

How to reset your pattern if you have forgotten it and now you cannot unlock your Huawei smartphone. On the U8110, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Manual download and update procedure:

This Huawei U8110 built-in driver must be included with the Windows® operating system or available for download via Windows® Update. The built-in driver supports the basic functions of your Huawei U8110 hardware.

To perform automatic download and update:

Recommendation: If you are inexperienced in manually updating Huawei Smartphone device drivers, we highly recommend downloading DriverDoc to help update your Huawei U8110 drivers. This Windows utility automatically downloads, installs, and updates your current U8110 drivers, preventing you from installing the wrong driver for your OS.

DriverDoc can be used to automatically update not only your Smartphone drivers, but all of your PC's other drivers as well. This utility has access to a database containing more than 2,150,000 device drivers (the database is updated on a daily basis), so that the latest versions of the necessary drivers will always be installed on your PC.

Install Optional Products - DriverDoc (Solvusoft) | | | |

Huawei Frequently Asked Questions regarding the update

What do Huawei Smartphone device drivers do?

These tiny pieces of software are helpers for hardware devices such as the U8110 as they allow proper communication between the hardware itself and a specific version of the operating system.

What operating systems are compatible with U8110 drivers?

Currently U8110 has device drivers for Windows.

How do i update U8110 drivers?

Drivers for U8110 can be updated manually using Device Manager, or automatically using a driver update software.

What are the benefits and risks of updating U8110 drivers?

Main benefits of updated U8110 drivers include maximizing features, speed, and overall system performance. Installing the incorrect drivers puts your system at risk of instability, random crashes, and decreased Windows and Smartphone performance.

About the author: Jay Geater is President and CEO of Solvusoft Corporation, a global software company focused on innovative services. He has been passionate about computers all his life and loves everything related to computers, software and new technologies.

Don't know how to flash Android? We will tell how to update firmware on Huawei U8110... For this, step-by-step instructions were made.

Why update firmware on Android

The reasons are different for everyone, the main thing is that the manufacturer fixes bugs and shortcomings in the new firmware.

Problems with the front selfie camera, let's say it takes pictures of far from the quality indicated on the lens.
The problem with the display response, more specifically, with the response speed.
I would like to see the new Android Pie 9.0.
I'm tired of the old version of Android, I want new functions and capabilities.
The phone doesn't want to turn on.
The phone battery has stopped charging.

First you need to download the firmware by choosing one of the options below. Together with it, the archive contains the necessary set of programs (TWRP and others).
Then unpack the archive and find the file "instruction_rootgadget.txt". You can unpack the archive with any archiver (7ZIP, WinRar and others).
The firmware zip file in the archive must be downloaded to a memory card or smartphone memory.
For the rest of the information and the sequence of actions, see the text instructions.

Firmware Huawei U8110

Choose what you like, but it is best to download the most modern versions, there are more optimized power consumption and other joys in life.

Android Pie 9.0 - you can say the flagship OS, but still a little unfinished. Url: upfileget.info/android9pie
8.0 Oreo is a great option, a minimum of bugs and rich functionality, but version 9 is certainly better. Url: upfileget.info/android8oreo
7.0 Nougat is a stable version in all respects, it works even on low-power hardware. URL: upfileget.info/android7nougat
6.0 Marshmallow - 5 and 6 versions - this is already real old stuff, although it was once the pinnacle of progress. But if you switch to them from version 3 or 4, then of course the difference is very noticeable. URL: upfileget.info/android6
Android 10 URL: upfileget.info/android10

Root rights

If you want to get root access, you can use the universal program Rookthp Pro 3.2, swing