The charging socket on the ipad 3 does not work. The charging connector (Lightning) of the iPad does not work. When repairing iPad charging is the only way out

How does the repair work:

• 1 We diagnose the delivered
  device you or our courier.
• 2 We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
• 3 Receive a working device yourself or call our courier.

There are a number of reasons for repairing connectors on the iPad Air 2. The most common ones are:

• Water ingress.
• Damage due to mechanical impact.
• Dirt on electrical contacts.
• The use of non-original (not approved by the manufacturer) accessories.

The only way to eliminate the resulting malfunctions is to replace the inoperative component.

Replacing the connectors on the iPad Air at the service center

Replacing the charging socket, headphone connection and USB-input on the iPad Air is fraught with a number of difficulties that begin even at the stage of disassembling the gadget. This is indispensable, since they are located inside the device. In this case, a number of special tools will be required - from a screwdriver to plastic spatulas, the shape of which is selected in such a way as to separate the components of the device from each other without damage.

Initially, the front panel of the device is removed, the screen module is unscrewed. After the touchscreen and screen cables are disconnected, the front panel is folded back according to the principle of a book, and then the master, using a dielectric blade, will move the central plate, which performs the function of protecting against electromagnetic interference in the iPad. You can now swap out the iPad Air 2 inputs that are out of order. Then the gadget is assembled in the reverse order.

Why DIY gadget repair is very risky

It is not only difficult to do this at home, as well as outside a specialized center, but also fraught with other breakdowns of the iPad Air 1. Most of the risks are associated with some design features of a number of Apple devices. Almost all internal and external components are used as load-bearing elements. Moreover, many of them are combined with each other into one non-separable part.

Another difficulty lies in the fact that the degree of influence of the tool on them should not exceed certain limits. In essence, it is a skill acquired through continuous practice. This is not the case, both for the overwhelming majority of tablet users and for the masters of third-party services who undertook to replace the faulty part. Another unpleasant moment in their work is the use of used or non-original spare parts. What this way of saving leads, we see from the calls to our service centers. Very often - for more common types of repair, for example, replacing the headset connector on the iPad Air.

We serve the employees of these companies

We will repair the connectors on the tablet within 30 minutes

Therefore, a much better and more economical way to solve this problem would be to contact one of our services specializing in the restoration and maintenance of Apple products. We can replace any faulty component.

At the same time, the most demanded of them are always available, which greatly speeds up the process of eliminating breakdowns. For example, it takes less than half an hour to replace the iPad Air case. However, this is not the only key advantage of our services.

Much more important are the following features of their work: the use of only original components, extensive experience of specialists performing the elimination of breakdowns, long warranty periods.

In addition, all service centers are located near the metro. And each of them provides comfortable conditions for waiting for customers - a comfortable sofa and free WiFi. If it is not possible to visit the service, we will provide courier services.

Your iPad Air has stopped charging or is it charging very slowly? Most likely, you will need replacing the charging connector on the iPad Air ... Charging connector, which simultaneously serves as a connector for data transmission via USB cable from a tablet to a computer, is designed in such a way that careless handling can disable it. Also, the charging connector in the iPad Air could break during long-term use due to trivial mechanical wear and tear.

Charging connector on iPad Airmay break for the following reasons:

• ingress of moisture, dust or dirt into the device can lead to oxidation and corrosion of the loop;
• repeated inaccurate connection of the charging or USB cable may deform or damage the charging connector;
• use of non-original and low-quality chargers;
• the tablet was charged in the car using an unsuitable charger.

Repair of the charging connector on the iPad Air is carried out by replacing the damaged lower loop on new. If you need repair of charging connector on iPad Air, bring it to our service center. We will carefully disassemble your tablet, remove the damaged bottom train and put a new one in its place. Then we will put the tablet back together and check it for full performance, after which we will return it to you with a guarantee for the work done.

The charger connector plays a very important role in any gadget. If it breaks down, it is not recommended to postpone the repair for a long time. A defective iPad Air charging connector prevents you from using the gadget after the battery is completely depleted. Also, in this case, it is impossible to connect to a computer for synchronization.

Causes of malfunction

The charging connector is one of the most vulnerable elements and fails for a variety of reasons. The main reasons why the charging connector isn't working on iPad Air include the following:

1. Moisture penetration into the device, leading to oxidation of internal contacts and corrosion.
2. Mechanical damage due to strong impact or falling from a height.
3. Connector clogged with dust or dirt.
4. Intensive use, resulting in abrasion of the assembly
5. Use of non-original and low-quality power cables.
6. Malfunction of the bottom cable, on which the charger connector is located.

How to solve the problem

If the connector is clogged, you can try to clean it yourself, but in more severe situations, you will need to replace the part. In this case, you will definitely need the help of professionals. The specialists of our service center repair the charging connector on the iPad Air as efficiently and promptly as possible.

Before starting repair work, free diagnostics are carried out, which allows you to establish the cause of the malfunction and find the best way to solve the problem. If it is necessary to replace the charging connector, original components are used, and the repair procedure takes only 1-2 hours.

Tablets from "Apple" quite often come to the service center due to the failure of the device with the charger. There may be several options for the occurrence of such a breakdown. Obviously, the problem lies either in the charger connector, in the charger itself, or in the device's battery. Self-correction of such faults can only be done with certain skills and the necessary tools.

Reasons why the charging connector (Lightning) iPad (iPad) does not work

The charger connector can fail for many individual reasons. The most common are:

• mechanical impact on individual elements of the tablet or on its body as a whole. Quite often, tablet computers are subject to drops and shocks, and this impact negatively affects the operation of the device. This could damage the control board or disconnect loops. In addition, very often they sin on a malfunction of the Lightning socket in cases of a banal rupture of the charger cord. Micro breaks in the cable may appear if the iPad is dropped while charging;
• Moisture inside the tablet or on the case may also cause the charging connector to malfunction. Many people know that when interacting with water, metals tend to oxidize. It is the oxidation process that can cause a short circuit between the contacts of the power module, which will lead to a malfunction of the Lightning connector;
• the physical impact on the device does not depend on the owner of the device. Such influences include temperature drops and power surges. It is no secret that in domestic networks, sudden voltage drops are a routine process. However, for Aypad, this is a serious test, which quite often ends with a breakdown in soldering or burnout of individual elements and entire modules of the unit. Therefore, if the reason for the failure of the connector for connecting the charger is a voltage surge, a simple replacement of this element does not guarantee the operability of the gadget;
• battery wear should not be ruled out. Many may think that the battery malfunction has nothing to do with the Lightning connector, but this is not entirely true. If the battery is very worn out, connecting the charger does not start the charging process. Each owner first of all sins on the charger connector, but the real reason for this behavior of the tablet is the depletion of the battery life.

It is quite obvious that in order to establish the cause of the problem with the charger connector, you need to diagnose the device. On its own, diagnostics are carried out according to the following algorithm:

• connect another original charger to the device. This will help eliminate the defect of the adapter. If the working charger does not start the charging process, then the problem lies in the iPad hardware;
• then you need to synchronize the tablet with your personal computer. The fact is that the connector for the charger and the USB cable is the same connector. Therefore, if, when connecting the tablet to iTunes, the system gives an error or the connection does not occur at all, then most likely the problem lies in the connector;
• visual inspection can also help locate the problem. Quite often, the charger refuses to work when the socket is heavily clogged. Therefore, it is advisable to carefully inspect the connector for the adapter. Most Aypad owners carry them with them almost everywhere, therefore, the likelihood of clogging is quite high.

Repair options in cases where the charging connector does not work (Lightning) iPad (IPad)

The only way to fix a malfunctioning charger connector at home is to clean it. The nest must be cleaned using non-metallic tools. It is most convenient to do this with a wooden toothpick, but it is best to seek help from specialists.

Repair of the connector for connecting the charger in the service center "APPLE-SAPPHIRE"

If, after going through the points of self-diagnosis described above, it was found that the problem lies in the Lightning connector, or the reason was not found, then it is best to contact the APPLE-SAPPHIRE service center for help. The specialists of our company, as soon as possible, will carry out a complete diagnosis of your iPad, establish the cause of the malfunction and carry out repair work.

Broken charging connector for iPad Pro 12.9

If the charging connector does not work, most often the problem is in it. The part just needs to be replaced, we change it quickly and put original spare parts with a guarantee

Charging connector 1300 rubles. + installation 600 rubles. - from 20 minutes

When do you need to change the charging connector on the iPad Pro 12.9 and when is it not the problem?

• At 60%, the charging connector is replaced on the iPad Pro 12.9, if the cable is damaged, components or charging do not work.
• Breakdown in other parts should be looked for in 40% (water could have spilled on the device, a fault in the loop, board, or there are microcracks). It is necessary to carry out diagnostics to find out the causes of the malfunction.

How is the lower flex cable replaced on iPad Pro 12.9:

When the tablet does not charge or a message appears that the equipment is not recognized, then the power connector on the iPad Pro needs to be repaired. Very often, the charger port is damaged by the user himself when trying to connect the wrong side of the cord. If you have performed such actions with the use of force, then it is very easy to get a damaged charging socket. This part is rather fragile, so it won't take you a lot of time to get damaged. Water could also have spilled on the part, and a corrosion process occurred inside the device. If you use non-native chargers, you can easily disable this element. It is also necessary to carefully examine the cord for any damage, often changing the cable restores the functionality of the gadget. If the device was connected to the network and there were power surges, visit an Apple service center to restore the functionality of the device. In the contacts section you can find out the address of the service center and you can bring the device yourself. Free of charge after the call, the courier will deliver the device to the service.

After receiving the device for repair, we do:

1. Computer diagnostics allows you to identify what is defective on the tablet. The service lasts a maximum of 20 minutes and is completely free.
2. It takes about 40 minutes for the master to change the charging connector.
3. After fixing the breakdowns, the device is issued to the owner with a warranty card lasting up to one year.
4. Do not waste time on delivery of a technician, but call a specialist to your home.
5. The price is indicated in the price list for the parts themselves and for the services provided by specialists. Call the operator and get advice on all prices.

Do you urgently need to fix a breakdown?

Very often, the use of "non-native" chargers disables the part. Power surges will certainly also cause the port to malfunction. If moisture gets on the microcircuit, and a corrosion process has occurred or there was other damage due to which the connector does not work, come to our service. After diagnostics, we will promptly and urgently carry out repairs at the highest possible level. We also recommend that you check the cord yourself, if the problem is in it, you just need to change the cable itself.