Moisture has got under the protective glass. Everything you need to know about protective glasses for smartphones. Matte or glossy

Some precautions when handling gadgets are by no means superfluous. Even novice users are well aware that the touch screen is one of the expensive items, the replacement of which costs a respectable amount. Significantly increases the strength indicators of the device by special glass that protects it with little mechanical stress. Many owners of mobile phones prefer to glue the protection on their own without contacting a service center. As a consequence, after such attempts, noticeable air bubbles appear, which spoil the appearance of the screen. Let's talk about how to get rid of such a nuisance, what exactly an ordinary user with no technical knowledge can do for this.

Methods for eliminating air under protective glass

Once again, we warn you that we will talk about ordinary procedures, there is nothing complicated about them. So, if the air gets caught, it is recommended to take one of the following actions:
1. In a number of simple cases, an ordinary piece of flat plastic can help. To solve the problem, a credit card or a driver's license is suitable, with which it is worth trying to drive out the bubbles that have appeared.
2. If you fail, do not despair. Obtain a small needle to gently pry on the edges of the guard. Use a needle in places where air contamination is noticeable. After the air is removed, firmly press the protective element against the screen of the gadget.
3. A standard hair dryer can help. It is necessary to warm up the smartphone a little for several minutes. In no case, do not bring the hair dryer too close! The equipment must work at a distance of 25-30 cm! After completing the activity, place the electronic product on a flat surface under a press of several heavy books. After about 6-8 hours, only a memory will remain from the air bubbles.
4. In the presence of a large number of blisters, it is worth resorting to a more radical method. It is quite possible that the air under the protective glass will disappear after the complete dismantling of the protection. After that, attach a strip of tape to the glass surface, onto which all small debris will go. Then put the glass accessory back in place.

Despite the apparent simplicity, each of the procedures described above requires careful preparation. Note that work should be carried out in an environment of maximum sterility, with a minimum of dust. At home, to solve this problem, it is advisable to use a bathroom - in rooms with a high level of humidity, there is much less dust. Do not exert significant physical effort with each action. The work is delicate, does not like haste, requires caution. Be sure to remove the grease from your hands, otherwise serious problems can arise.

Try to initially stick the glass correctly

To avoid problems, there is no need to remove the bubbles under the film on the phone, try to immediately stick the protective cover correctly. Understand that it is better to do a task well initially than to try to correct mistakes later. We will provide useful information that will help you avoid problems when installing a thin accessory.
Remember to remove grease stains from the screen surface. Be sure to use a liquid with a high alcohol content to achieve this. Do not forget to wear disposable medical gloves that do not restrict movement and allow you to perform precise work. Remember that the sticky side of the accessory must never be touched. In this case, the adhesive parameters of the coating deteriorate significantly. The ideal option among professionals is the presence of a suction cup, it significantly facilitates the process of completing the task.
If you have doubts about your own abilities, take your smartphone to a specialized service. Any master is able to solve such a simple problem for a modest reward. By the way, the quality of work largely depends on what kind of glass you purchased. Practice proves that failures occur much more often when trying to stick cheap copies. Therefore, never skimp on protection, buy only expensive copies.

Although there are many waterproof devices on the market today, most smartphones do not survive contact with liquids well. Getting caught in the rain is not the worst thing that can happen, but you can dry and return the device to working condition even after accidentally washing it or falling into a puddle or pool.

What to do if your touchscreen phone gets wet

Before proceeding with any action, you must immediately turn off the gadget. For phones with a non-removable battery, this can be done by long pressing the lock button. Otherwise, just remove the battery - this way you will avoid a short circuit, otherwise even the service center will not be able to restore the device to work. Then follow the instructions on how to dry the gadget:

Disassemble the device. Ideally, each piece should be dried separately: remove the SIM and MicroSD cards. Remove covers, protective glasses and back cover. Unscrewing everything to the screws is not worth it, it will be difficult to assemble the device back, so if you have a monoblock model (with a non-separable body), stop at removing all inserted cards. Use screwdrivers only if you are sure that you know well the device of the gadget.
Place the device face up. Let gravity do its job and allow water to accumulate at the bottom of the gadget.
Absorb moisture with a paper towel or tissue where possible. Turn the device slightly so that accumulated liquid can drain out through the openings. At the same time, avoid sudden movements and do not shake the gadget in the hope of drying it out faster, otherwise water will flow in again and flood hard-to-reach places.

Keep in mind that it is strictly forbidden to turn on the device immediately after you have wiped the surface. The most important and final step is drying the phone after water. Depending on which method is chosen, this will take a different amount of time.

You can dry the phone by leaving the device in the air for 3–7 days, but this is long and does not guarantee further operation, since radioelements are oxidized under the influence of liquid. Use an absorbent material to help draw water out of the device and dry faster.

How to dry your phone at home

An absorbent is a substance that draws out and absorbs moisture. Whichever method you choose, you need a container to hold both the product and your phone. Drying rules for each method are below:

Put the phone in fig. It is the most famous absorbent. The fact that the phone can be dried in rice is not a myth, this means is effective. Put the gadget without a battery and a lid in a bag with cereals for 2-3 days. Flip the device every 12 hours.
Use silicone gel cat litter. This product is considered to be even better absorbent than rice. To dry your gadget, place it in a container of filler for 48 hours. In this case, the tool must completely cover the device. Turn your smartphone over from time to time.
Dry the phone in silicone shoe balls. An alternative option, similar in effectiveness to the previous one. Draws out moisture in 2 days.

A tip that is relevant for all methods: check the smartphone every 6 hours and wipe the moisture from its surface with paper towels. In addition, in case of severe damage, you can change the absorbent to a new one.

Can I dry my phone with a hairdryer or vacuum cleaner

To dry the elements by removing liquid from the insides of the apparatus, it is better to use a vacuum cleaner. To do this, put on a narrow nozzle and consistently bring it to all openings of the gadget. Remember that after this procedure, you still need to place the device in an absorbent or leave it to air dry.

All the tips mentioned above are relevant both for smartphones that have been in the water, and for those that have bathed in soda, lemonade, tea and other liquids. Do not rush to wash out the substances under the tap, but do all the points from the instructions or take the damaged device to a service center - they know how to dry it thoroughly.

Repair may be necessary even when the procedure was performed correctly: diagnostics will show whether the boards and radioelements have oxidized under the influence of the liquid. In addition, there are times when water stains remain under the display.

Video

The modern market offers each buyer a huge number of different models of gadgets, smartphones and other similar devices. Despite the fact that the display is made reliably, the buyer decides to extend its life by purchasing a protective glass. This is due to the fact that after a while we do not treat smartphones as carefully as in the first stage. Today we will talk about how to clean the phone before applying glass, how to get rid of dirt, remove streaks, how to clean a gasoline and rainbow stain, cut, wipe the protective glass from the inside and what tools we need for this.

What is safety glass?

Protective glass is a modern form of covering for displays on smartphones and gadgets. It is made using a chemical method based on tempered glass.

Important! Compared to ordinary film, it is several times thicker and harder. That is why, if the phone has this coating, it protects the screen from fingerprints, scratches, moisture and even shock. Despite these specifications, brightness and color do not change.

Due to the multilayer coating, the glass thickness varies from 0.25 mm to 0.5 mm, the composition of which is as follows:

The first layer is always silicone based. It sticks to the display.
The next layer is bonding. It is he who does not allow the fragments to spread out if a crack or mechanical shock occurs.
The third coating layer is an anti-reflective film. It maintains the visibility of drawings on the screen when it is exposed to direct sunlight or other bright light.
The protective layer protects against shocks, falls and other mechanical damage.
The very last layer is the oleophobic coating. It protects against moisture, fingerprints and makes it easy to clean.

With heavy use, the top coat, which ensures the reliability of the unit, becomes dirty. It is then that the question arises of how to clean the protective glass of the phone. How to do this and what is required for this, we will consider further.

Immediately pay attention to the condition of the back of your gadget. You may find useful information on how to remove scratches from your phone.

What is screen protector?

The protective film has appeared on smartphones for a long time. It is not a high-tech product and is present on every gadget. This product is characterized by the presence of three layers:

the lower one sticks to the screen;
medium absorbs ultraviolet radiation and provides brightness when exposed to bright light;
upper - is responsible for protecting the display screen.

Important! The most important thing for the film is proper adhesion. To do this, you need to have a little skill, since it may not always work out the first time.

All protective films that are present on the market for smartphones and gadgets are divided into three types: matte, glossy and mirror. Let's take a closer look at each view in order to understand if there will be a difference in cleaning:

The matte film absorbs glare and also hides fingerprints. The main disadvantage is that it degrades image quality. However, its cost is very low. Many craftsmen consider such a film to be a technological one and advise not to stop the final choice on this product.
Glossy screen protector is the most popular among similar products. The main disadvantage of this coating is that it can be easily damaged. The film strongly reflects light, scratches and other mechanical damage quickly appear on it. Fingerprints are also visible.
Mirror film is the least popular among similar products. The peculiarity lies in the fact that when the screen is off, it can mirror the image. However, the quality and brightness of the screen changes when this coating is applied - this is the main disadvantage.

All of the above films become dirty and this is especially noticeable when dust gets under the coating. We will now analyze how to clean the film for the phone.

How do I clean the protective glass on my phone?

If you are thinking about how to clean the film for your phone, then ordinary scotch tape, or as it is also called, adhesive tape, will help you. To do this, you need:

take a wide tape;
cut off a piece of about 30-40 cm from it;
glue it to the surface so that the sticky side is on top.

After that, it is worth sticking the protective film to the tape with the sticky side. Then very carefully and slowly peel off the film immediately. All the dust that was present on the product will go away and the sticky layer will remain.

Important! If it is necessary to remove scratches from the upper part of the protection, then polish the defects with felt, a soft cloth or with the help of auxiliary means - white toothpaste, GOI paste or olive oil.

Another way to clean the inside of the safety glass is to use soap and water. For this:

You need to remove the contaminated product from the phone.
Wash off all dust particles in hot water.

After carrying out this procedure, it is worth very well to lather the sticky layer with soap. For this, it is better to use two or three layers.
After that, take and wash off the soapy solution under water. See that the water is glass from the film.
Then we glue the film onto the cleaned, damp display using an ordinary credit card.
We make sure that no air bubbles and other lint get in.

If all else fails, the best way to restore the attractiveness of your gadget is to replace the security piece. On our website you will find detailed instructions on how to

According to the assurances of the manufacturers, the displays of modern smartphones are protected by glasses that are extremely resistant to scratches and damage. Gorilla Glass- the most popular of these glasses, installed in most phones in the middle and high price segment, but even it does not always save the display from damage. In order to provide maximum protection, either shockproof glass is most often used, less often - liquid protection, such as , as in the picture below.

If, as a rule, there are no problems when installing a film or Nano liquid, then certain difficulties may arise when applying a protective glass. This is especially true for the glass sticker on the phone with rounded edges, the so-called 2.5D. In this case, a non-glued strip is often formed along the edges of the glass, which greatly spoils the appearance of the phone. Below I will tell you in what ways you can get rid of it.

What to do if the glass is not stuck at the edges

And so, you glued on the glass, and around the edges it turned out to be such a disgrace:

In this case, it is the Xiaomi Redmi Note 4X phone. Let's try to fix the jambs.

I know two methods - one handicraft, if I may say so, and one industrial (I could not find a more suitable word).

# 1 First way

Chinese craftsmen do not sit idly by and invent all sorts of things that make our life easier. To solve the problem, if the glass does not stick around the edges, a special tool was created in the Middle Kingdom. It is called Border Liquid or something like that and is a transparent gel, which you need to brush over the edge of the glass with a brush.

And a short video on how to use it all:

# 2 Second way

If there is no money for a miracle remedy or you just don't want to wait until it arrives from China, you can use the means at hand.

We need: a napkin, a thin brush and some vegetable oil or glycerin.

Gently apply glycerin to the edge of the glass, making sure it fits into the joint and fills in any voids. When finished, remove the excess with a napkin. The smaller the initial width of the white, non-glued strip, the better the final result will be.

These are the easiest ways to solve the problem if the glass is not glued around the edges. Try it, unsubscribe about the results in the comments.