Iphone 5 hung on a string. What to do if the iPhone is hanging on a cord. The iPhone does not turn on and asks to urgently connect it to iTunes, what should I do? Professional smartphone repair. Recovery Loop Mode - Obedient

How is the repair going:

1 Free diagnosing brought-
device, either by you or our courier.
2 We make repairs, and also give a guarantee on new installed parts. On average, repairs last 20-30 minutes.
3 Get a working device yourself or call our courier.

The most common causes of failure are:

OS errors
Presence of marriage
Gadget dropped or hit

The first case in which the iPhone 4s hangs on the iTunes cord suggests incorrect work operating system, or incomplete installation of the OS using a computer. Most often after iOS updates. But also, this problem may occur if the phone has not passed the growth test. Then a jailbreak is made on it, which allows you to use a Russian SIM card and helps make other changes to the iPhone 4s.

Hangs on a string iPhone 5s - marriage?

If we talk about factory marriage, then most often the iPhone 5c suffers from a speaker or antenna. And the user either does not hear the interlocutor, or cannot access the Internet. But, our service is also addressed with a complaint that the iPhone has just been bought, but after a week it starts to fail. Then it hangs on a string.

What to do if the iPhone is stuck on the cord?

First of all, we recommend returning the phone under warranty. But if this is not possible, then we do flashing and other manipulations already in our service. After that, the gadget most often comes to life. We also solve other problems along the way. For example, we can change the speaker on the iPhone 5s, which in no way interferes with the process of flashing the device.

If the iPhone hangs on the cord after being dropped, then there was damage motherboard or processor. In this situation, the defect will not be obvious, but when upgrading to new version iPhone 5s firmware shows a lanyard on the screen, or a requirement to connect it to iTunes.

To solve the problem, you need to come to our workshop. Where they know what to do with your situation. After diagnostics in our workshop, they will tell you exactly why the iPhone 5c is hanging on a cord, and, if necessary, they will restore the software. In this case, after the firmware, the phone should work again. If you notice that before the iPhone freezes, your Internet stops working, then you may need to replace the antenna on the iPhone.

We serve employees of these companies

If you see a string appear on the device screen on a black background and the iTunes icon at the top of the screen, it means that on the iPhone in this moment one of two modes is running - this is Recovery Loop or Recovery Mode.

recovery mode- This is a special recovery mode on any iPhone, designed for emergencies when the smartphone cannot boot and finds errors in the software. If the phone reboots after checking and again shows the cord and the iTunes icon, then the device has switched to the recovery loop, or, as it is otherwise called "Recovery Loop".

To understand what mode your phone is currently in, you just need to restart your smartphone. If after a reboot it works correctly, then this is the normal file recovery mode (Recovery Mode). But, if your device still returns to its previous state after a reboot, then the phone is in the Recovery Loop mode. You can’t get out of it with any buttons, then you can use special programs or take it to a service center so that the masters do it.

How to exit Recovery Loop mode

For this, specialized programs have been developed. These are TinyUmbrella, RecBoot and Redsn0w. All products can be downloaded for free on the official websites. Let's consider each of them in detail.

TinyUmbrella. Connect your iPhone via USB after installing the program. Run her. Put your device into DFU Mode. Once the phone is transferred to this mode, the Fix Recovery tab will become active in the program window. Click it and in the window that appears, confirm the action by clicking the "Yes" button. Within a few minutes, your phone should automatically reboot and return to its previous working state.

redsn0w. Download and install the application from your computer. Connect your iPhone via USB cable and run the program. Click on the Extras tab. In the window that appears, click on the Recovery Fix tab. Next, put your smartphone into DFU Mode. Program in automatic mode detect DFU, and fix any errors. Within a few minutes, the phone will be restored to its previous working state.

recboot. If you can’t restore your iPhone using the above programs, then use the small RecBoot utility. Download the files from the official website and install on your computer. Connect your phone via USB cable and wait for the program to detect the device. Next, click on the Exit Recovery tab. Wait until the device reboots and returns to its previous state.

If you don't know how to put your smartphone into DFU mode, please read the guidelines below carefully. DFU mode on all generations of the iPhone turns on the same way:

You need to connect the iPhone to the computer via a USB cable and hold down the Power and Home buttons at the same time for 10 seconds. Then release the Power button while holding down Home. Hold until the phone sees the computer in DFU mode.

If you are unable to restore the machine using the described software tools, use iTunes. But keep in mind that in this case, all data from the iPhone will be deleted. Connect the device in DFU mode to the computer, open iTunes, wait until the device is detected by the system. Click the Restore tab and Confirm the action, then wait until the end of the procedure. Once the process is complete, your iPhone will restart and work properly. And it will not be possible to remove cracks from the screen, only service center engineers will help. They will also help you and restore your iPhone, exit various recovery modes.

Y many iPhone users 7 USB cable and iTunes icon will appear on the screen after updating to iOS 10/iOS 11, usually in this case, it is considered that your device has already entered recovery mode. After a series of "Unknown Errors" it came to a black screen with a cord and an iTunes icon, the service said that the problem was with the board. Or you had an iPhone 7 problem with a black display where a cord and an icon in the form of the iTunes logo appeared, after a forced reboot, the phone does not react to anything at all and does not turn on or charge. This article is about what to do if iPhone 7 is stuck on iTunes string after iOS 10/iOS 11 update?

Free way to recover with Tenorshare ReiBoot

Free program will solve your problems, iPhone 7 is in recovery mode and stuck on connect to iTunes icon after iOS 10/iOS 11 update, Tenorshare ReiBoot will help you get out of recovery mode, and your device will restart itself after some minutes.

First download and install Tenorshare ReiBoot on your computer. Connect your iPhone/iPad/iPod touch to your computer with a USB cable. Then Tenorshare ReiBoot will recognize your device in recovery mode, click the "Exit Recovery Mode" button. Wait a bit and the device will reboot safely. Do not turn off the device during this process.

Solve stuck on iTunes logo in iTunes

The way to get rid of the cable and iTunes black screen is to restore to iTunes, but it will erase all content, so create a backup before using it.

Download and install iTunes on your computer.
Open iTunes, connect your device to PC with a USB cable.
Wait for the iPhone image to appear on the screen with the cable connected.
Click the "Restore" button in iTunes. the device will start working normally again.

Fix operating system with Tenorshare ReiBoot

The usual way- force reboot, but after a forced reboot, which is used to exit the normal recovery mode, the iPhone 7 still continues to load a black screen on which we see the cord and iTunes again and again. This situation means that the iPhone 7 got into the so-called recovery loop mode (Recovery Loop). Getting into the Recovery Loop can happen for various reasons, for example, as a result of errors after updating or restoring the iOS 10/iOS 11 firmware. Then you need to fix operating system.

How is the repair going:

1 Free diagnosing brought-
device, either by you or our courier.
2 We make repairs, and also give a guarantee on new installed parts. On average, repairs last 20-30 minutes.
3 Get a working device yourself or call our courier.

However, there is a somewhat different from the "Recovery Mode" or recovery mode, the "loop" mode or otherwise "Recovery Loop". How to accurately diagnose and what to do to restore the iPhone 6 Plus to working capacity?

A normal recovery boot can be stopped with a forced reboot, or simply wait for the process to complete. But if the iPhone 6 Plus freezes, it means that it has moved into the Recovery Loop.

Loop mode means that Apple device“hangs” and cannot return to working state on its own, or during diagnostics, a system error or hardware failure has occurred that cannot be eliminated by a forced reboot.

Moreover, a system freeze may occur, including after a forced reboot.

Why iPhone stuck on iTunes cord

Reasons that lead to the "loop":

Trying to downgrade the modem through iTunes;
IPhone 6 Plus system update download interruption;
Attempt to downgrade the firmware version through the computer;

How to restore work if the iPhone is frozen?

Getting out of the Recovery Loop is much more difficult. You can try to boot the device using special applications. For these purposes, the most commonly used programs are TinyUmbrella and RedSn0w.

There are two kinds of "loop": obedient and naughty.

In the first case, it is difficult to return the iPhone 6 Plus to working capacity without data loss, but it is possible. To do this, you should use the TinyUmbrella program, there are other programs, but to work with this software, in any case, you need at least basic knowledge and understanding of the processes that will occur.

We serve employees of these companies

We do a flashing if the iPhone 6 hangs on a cord, with high quality!

If the iPhone 6 Plus freezes and gets into a naughty Recovery Loop, then any attempts to rehabilitate the phone are already powerless.

Remains the only way out- reflash the device.

When installing a new iOS version on iPhone through iTunes in normal mode it is not possible, and the phone continues to “hang”, a special emergency DFU mode is introduced. In this case, you lose all the information that you stored on your smartphone, but you can recreate it after the firmware from backup.

iPhone stuck on iTunes cord

If there is no way to do it yourself, then only qualified craftsmen should entrust the firmware of the gadget 6 Plus. Everyone should understand why experience and professionalism are important here. We have been working in this area since 2009, the accumulated experience allows our specialists to quickly and efficiently restore the system, change the speaker, and other failed parts and return your phone to a fully working condition.

The army of smartphone fans is increasing day by day, the more devices are used every day, the more more problems arises with them. In today's article, we will analyze the situation when an iPhone (of any model) asks to connect to iTunes and does not turn on.

The problem is frequent and well known to servicemen, not fixing it takes about half an hour of work and 1500-2000 rubles of money. In order not to waste the family budget, we will try to turn on the iPhone on our own, at home.

Causes

There are many reasons, it is difficult to systematize them, but there are several popular ones:

The firmware flies - it is because of this that the iPhone 5, 6, 7 models do not turn on, iTunes and the cord are on. How to reflash the device will be considered in the next section.
A hardware error, as a result of which some system files were deleted or corrupted, again, flashing will help. Masters call it "iPhone hung on a string."
Error may occur after falling on a hard surface
Water ingress into the device.

What to do if the iPhone seems to be loading, but does not turn on, gives out a "lace" and asks to connect to itunes? Consider the options for solving the problem below.

Solution

To turn on a broken iPhone, follow the steps clearly according to the instructions. If you don’t understand something, at the end of the article there will be a video instruction on how to turn on an iPhone of any model through the official itunes software if it does not turn on. The instruction is applicable to all models Apple smartphones, 4, 5, 5S, 6, 6plus, 7, 7plus.

Downloading from the official site Apple program called iTunes (link).
Install iTunes and download the firmware for your iPhone model.
We turn off the iPhone and connect it to the computer using the standard cable from the kit (you can replace it with a good copy).
For 5 seconds, hold down the "HOME" and "POWER" buttons together, wait about 10 seconds.
After 10 seconds, release "POWER" (aka blocking), but keep "HOME" pressed!
After a while, iTunes will display a message about DFU mode, now we proceed to restore the firmware.
V iTunes find the "Restore" button and hold down "Shift" and press it.
In the window that appears, select the previously downloaded file with the .ipsw extension, confirm the selection.
The process of restoring the firmware has begun, now we are waiting for completion.

It must be remembered that when flashing, all data will be erased. If you don't have a backup or if you kept all your photos on a dead device, without iCloud usage, it will not be possible to restore them. In this case, you should immediately contact authorized service centers, they will help you, but they will ask for good money for the work.

Possible difficulties

If errors occur during the flashing process, for example, a warning appears with error number 9, then the situation is much worse. Most likely, an important microcircuit inside the phone is damaged, it is unlikely that you can fix it yourself. In this case, you will have to contact the repairmen, since it is not realistic to solder the microcircuit without special equipment. Although our craftsmen have learned how to do this, I’ll leave a video about soldering the microcircuit with my own hands, suddenly it will come in handy for someone.

It happens that other types of problems arise when the iPhone does not turn on, the daisy is spinning on the screen and nothing happens. Most likely you will have to reflash the device, but first we will try to do a hard reset, it will suddenly help. Do not be afraid, there is nothing complicated and terrible, you will not even lose data, as if you still decide to reflash your iPhone.

Instructions on how to hard reset if the iPhone does not turn on, the iTunes icon and cable appear on the screen

Press the lock button and the home button
We wait about 5-10 seconds
There is a chance that phone glitches will disappear
If it does not help, look at the previous section, and repeat everything according to the instructions.

conclusions

After several attempts, the smartphone did not come to life? In this case, the best solution would be to turn to experienced specialists, although this will not be free, you will protect yourself from the risk of completely “bricking” an expensive device. What to do when the iPhone 5s does not turn on and in an ultimatum form requires you to connect to iTunes, you now know, carefully read and watch the video, in 90% of cases this will solve the problem.

Video instruction

What to do when you find iPhone 5S hanging? Why iPhone 5S hanging on a string? Manual and DIY repair In a similar situation, will it help or will I still have to contact the service center?

Instruction: In such a difficult problem, when the iPhone freezes, there is a string on the screen, there may be several options for breakdowns and, accordingly, they will also have to be eliminated in different ways:

crash software of the communicator in question occurred. Need a new licensed firmware;
The Baseband processor has broken due to power surges or strong shocks to the device;
The power management chip is damaged. It will have to be replaced by the original counterpart;
Due to corrosion or other consequences of wetting, mechanical influences, the components of the printed circuit board do not function correctly - it is necessary to carry out preliminary computer diagnostics.

Outcome: The first option can be done independently at home without much difficulty, but if you have the 2nd, 3rd or 4th option, then they can be safely eliminated only in service center.

We have offered you 2 troubleshooting options - choose the one that is more comfortable for you.

Repair in the service Apple center telemama

Self repair

Our advantages

Spare parts are constantly selected only original, high quality.
Price. We purchase factory components in bulk, which we then sell to you at a reduced cost.
Repair time. On average, a standard replacement of displays, speakers, connectors, etc. lasts from 20 minutes. Another 20 minutes are needed for diagnosing complex cell phone defects.
Warranty 1 year.

If your mobile phone broken, not functioning properly, we will certainly help to repair it. It will be quite difficult for you to cope with such a task on your own. Bring communicators to our Telemama service in person or use the services of a courier service to save your time.

In the proposed SC Telemama computer diagnostics is done free of charge. After the examination, we discuss the exact cost of further manipulations and proceed to repair the device. Engineers with extensive experience install only factory components for replacement, which is confirmed by a long warranty.

When we finish repairing your iPhone 5S, come to the service yourself, or call a courier for delivery. A 1 year warranty will be provided in any case. In the future, both you and your friends will receive a discount on the maintenance of equipment from us, but for this you need to give your order number.

We have been performing high-quality repairs of iPhone 5S communicators for many years, in addition, we teach our clients how to repair the devices in question on their own, we sell original components for them. Read about the price of services and spare parts in the price list. It is possible to carry out only preliminary diagnostics in the service center, and at home already connect the component parts.

Regular customers do not need discounts, because they are always served by us at the lowest prices. New promotions are held quite often, thanks to which the iPhone 5S can really be repaired at cost and with a long warranty.

How is the repair going:

1 Free diagnosing brought-
device, either by you or our courier.
2 We make repairs, and also give a guarantee on new installed parts. On average, repairs last 20-30 minutes.
3 Get a working device yourself or call our courier.

A normal recovery boot can be stopped with a forced reboot, or simply wait for the process to complete. But if the iPhone 6 Plus freezes, it means that it has moved into the Recovery Loop.

Loop mode means that the Apple device is “hanging” and cannot return to working condition on its own, or during diagnostics, a system error or hardware failure has occurred that cannot be resolved by a forced reboot.

Moreover, a system freeze may occur, including after a forced reboot.

Why iPhone stuck on iTunes cord

Reasons that lead to the "loop":

Trying to downgrade the modem through iTunes;
IPhone 6 Plus system update download interruption;
Attempt to downgrade the firmware version through the computer;

How to restore work if the iPhone is frozen?

Getting out of the Recovery Loop is much more difficult. You can try to boot the device using special applications. For these purposes, the most commonly used programs are TinyUmbrella and RedSn0w.

There are two kinds of "loop": obedient and naughty.

We serve employees of these companies

We do a flashing if the iPhone 6 hangs on a cord, with high quality!

If the iPhone 6 Plus freezes and gets into a naughty Recovery Loop, then any attempts to rehabilitate the phone are already powerless.

The only way out is to reflash the device.

In the event that it is not possible to install a new version of iOS on an iPhone through iTunes in the usual mode, and the phone continues to “hang”, a special emergency DFU mode is introduced. In this case, you lose all the information that you stored on your smartphone, but you can recreate it after flashing it from a backup.

iPhone stuck on iTunes cord

Sometimes it happens that the iPhone freezes and the iTunes logo is visible on it, which indicates the start of the firmware recovery process. Across certain time the phone will update the software and return to normal operation. But in some situations, the icon appears on the screen USB cable, the gadget refuses to work and many do not know how to fix it and what to do in such a case. Let's look at the main causes of this annoying error and how to fix it.

Why is this happening?

The well-known rule is: best defense- this is an attack ”and, accordingly, at the beginning it is necessary to find out the cause of this problem. Why iphone stuck on itunes cord in this mode? In addition to software updates, it can also be:

Software failure (installing new software solves the problem);
Processor failure;
Mechanical damage or after an impact (maybe some part has broken that does not allow the iPhone to work);
The power microcircuit has failed (after impact or contact with moisture).

Each problem requires an individual solution.

Method 1 - Forced reboot of the device

One of the most common reasons is a software update. If you updated the phone's firmware shortly before the problem appeared, then you should wait for the recovery to finish and automatically reboot, or force it to be solved. For this, a hard reset is used.

This method of "fixing" the recovery mode differs depending on the model of the Apple device, but will help in a situation where the iPhone is stuck on a cord.

For iPhone 8 and newer, press and immediately release the Volume Up and Volume Down buttons, then press the Home button. Hold it until you see the Apple logo.

For iPhone 7 Plus, press the Power button and the volume down rocker simultaneously, respectively, until the company logo appears. If the iPhone 6 is stuck on a cord or an iPhone of another model, you should simultaneously hold down the Home button and the power button. The drawing should disappear and then the iPhone comes to life.

Method 2 – Fix iPhone Stuck on iTunes with iTunes

If method number 1 did not help you, the iphone stuck in recovery mode and you saw a notification that the phone needs to be restored via iTunes, then follow this manual. This is an easy process, and first you need to connect the device to your computer and run the program. Then the phone should start the treatment itself. If this does not happen, hold down Home and Power until the iTunes icon appears on the device screen.

Then click "Update" and wait for the operation to complete. By choosing this function, you can save data on the iPhone, but if you select "Restore", then all information and phone settings will be lost forever.

Method 3 - DFU

DFU stands for Device Firmware Update and is the deepest recovery mode for iPhone phones or any iOS device. It will completely destroy the information on your iPhone, but after that it will work as if it were just out of the box. The device will stop freezing, will work faster and crashes or errors in applications will disappear.

The first step is to launch iTunes and connect your phone. For iPhone 6S, hold down the "Sleep/Wake" and "Home" buttons at the same time for about 8 seconds. For 7k and newer, also hold these buttons together with "Volume Down" for 8 seconds. After 8 seconds, release the "Sleep" button, but keep holding the "Home" or "Volume Down" buttons, depending on the model. Your iPhone screen will be dark for a while and then the device will enter DFU mode. Release all buttons and select Restore iPhone. This solution is used by professionals and it helps when iphone stuck on itunes as well as in other situations.

Method 4 – Tenorshare Reiboot

In some cases, the so-called Recovery Loop occurs, i.e. "recovery loop". This means that after any of the above methods of recovery, the phone will continue to display a black screen and the very hated iTunes and cable icon to no avail. The reason lies in the misses of updating the operating system or in the errors of restoring the iOS firmware.

Fortunately, there is a large selection of effective programs to treat this problem. To fix this using the utility, you need to perform a few easy manipulations in a couple of clicks. Now the question is “iPhone stuck on iTunes, what should I do?” won't seem so intimidating.

Connect your iPhone and go to the utility. Then select the free function "Exit Recovery Mode".

If it still does not solve your problem, then select the "Fix operating system (resolve all iOS freezes)" option and click "Start".

A recovery window will appear in front of you, on which you should select "Fix Now". Reiboot will start downloading the firmware package and after the download is complete, click "Start OS Recovery".

This process may take a little time, but it will help to revive your device if the iphone is stuck in recovery mode and get rid of this problem.