Epson xp 600 ink pad. Error in Epson printers about the expiration of the absorbent pad. What to do if the diaper is full

Very briefly and concisely, we will consider the most frequently asked questions on the topic - resetting inkjet diapers, or absorbent printer pads. So, the list of errors that stop the printer:

Let's figure it out what is a diaper in a printer ?

On the vast expanses of the Internet, many articles about absorber, or, in simple terms, inkjet printer diaper(by analogy with a baby diaper, yes, yes! because the function of both is to absorb waste products). The waste ink produced by an inkjet printer is discarded into this very ink-absorbing pad when the print head is cleaned.

The Epson diaper itself, as well as the diaper of printers of other brands (Canon, HP, Brother) is a container with a hygroscopic filler (something like felt), or it's just a set of filler plates that are located below the printer bed, or towards the back of the printer. In order to avoid leakage of an overfilled diaper, the manufacturer has provided a special program counter that signals in advance (sometimes repeatedly) about the imminent overflow of the diaper. Therefore, if an inscription in the style " Attention! The ink absorbent pad is nearing its end of life"is the first signal that very soon you will need to get ready to go to the Econom Print Service Center at the address: Kiev, Lesya Kurbasa Avenue, 5B (the old name is 50th Anniversary of October Ave.).

Resetting an Epson diaper is a five-minute procedure. But besides the digital counter, there is also the level of physical filling of the diaper. So that you can be calm that the diaper will not physically overflow and the printer will not be flooded with waste ink - you need to change the original absorber to a new one from time to time. These absorbent pad sets can be found in our price lists. Usually they are ordered and bought after the life of the absorbent pad has expired.

However, there is an easier way. Less aesthetic, but cheap and practical. The essence of the method lies in the fact that from the drainage system of the printing device, waste ink is drained into a special reservoir. The conclusion is made through a thin and soft tube. The tank is attached to the back wall of the printer or MFP and has a sufficient degree of transparency, so that you can visually control the degree of filling of the tank. So, as it fills up, it is necessary to periodically drain the tank. And no troubles with the original absorber, no expenses for their purchase every six months. All mining will be dumped into a special compartment. And when the depressing inscription flashes again on the device screen: "The life of the ink pad is over. Contact Epson support" - it will be enough just to reset the diaper. Profit

So, let's get to the heart of the problem. If you already have an inkjet printer, or you have just read information about this type of device, then you are probably already familiar with the phrase head cleaning.

What is behind this phrase? In simple terms, this procedure is used to remove ink clots from the nozzles of the print head. Clots form for various reasons: long periods of inactivity, poor quality ink, dry climates, etc. In addition, there are preventive cleanings after a certain number of printed copies.

Where does this ink go? In household appliances, directly to the bottom of the printer, in an absorbent lining. In the people, this printer node was called "diaper".

The lining is designed for a certain number of cleanings. Usually, the more productive the printer, the more cleanings this node is designed for. On professional models, this pad is removable, in the form of a maintenance cartridge, for quick replacement after the ink pad has expired.

But why is this issue often discussed, are the manufacturers really stupider than a steam locomotive, and did not foresee elementary problems. It's all about the famous Russian mentality (well, we're not alone here). The essence of the problem is that household printers are starting to print 24 hours a day, making mini-printing houses out of household devices. It is clear that all this is not from a good life, but the inkjet printer is used far from the modes for which it was designed.

And if, during normal household use, the gasket is actually designed for the entire life of the printer (several years), then in the hands of skilled printers, the printer asks to replace it after a few weeks of operation. A particularly relevant issue is that the ink pad has expired for epson. It is these printers, due to their omnivorous ink, that are used to print a huge number of prints at a low cost.

In order to avoid draining ink to the bottom of the printer, with this use of household printers, the "waste" drain is taken to an external container.

But the printer knows nothing about such "upgrades" and continues to count the number of cleanings, blocking the work with a message about the "service life of the ink-absorbing lining", so as not to drown in the "waste" ink.

That's actually removing the lock and there is the main problem. In most cases, it is carried out using special service programs for Epson printers and MFPs. The programs are usually called "adjustment program". These programs are supplied only to authorized services, and are the intellectual property of Epson.

Therefore, not all printer models, these programs can be found in the public domain. In addition, there are a lot of non-functional versions of "adjustment program" programs in the public domain, especially for new models of printers and MFPs. At best, such a program simply will not work, at worst, it will turn the printer into a "brick". I would like to think that such programs do not appear intentionally.

There are also commercial projects that, for a fee, "reset" this counter in different printer models. An example of one such program is PrintHelp. By the way, with this program you can see the percentage of filling of the "diaper" counter for free, so that the blocking does not catch at the most inopportune moment.

Epson L-series inkjet printers have a limited lifespan due to component wear and tear during normal use. There comes a time when the fault indicators light up and the "End of Life" error message is displayed. Read below for tips on how to extend the life of your printer before buying a new one.

The message may refer to the waste ink collector, which is made in the form of a plastic container with absorbent pads (diapers). They collect, distribute and absorb ink that is not used on printed pages. Ink collects during initial product setup, during cleaning cycles, and when printing borderless photos. If the printer performs a large amount of printing, the counter counts them, including the number of printed and even blank pages. When the critical number is reached, a warning is triggered.

Resetting the saturation counter for Epson printer diapers

You can temporarily remove the end-of-life message using the maintenance program. The Maintenance Reset Utility can only be used once and will allow you to print for a short period of time. The printer then locks up and you cannot operate it even if you replace the ink collection unit.

The problem isn't with the hardware; it's just a small page counter in the printer that will cause your computer to display this message after a certain number of printed pages has been reached. Once this happens, you will no longer be able to use the equipment and you will be tempted to buy another one.

But here's a handy tip on how to save money and get your printer working again:

Download the SSC Service Utility for Epson printers. It is available for free on several websites. The program allows you to reset the diaper overload protection counter.

Click on the file and select Unpack or Unpack. Double click "Install File" to install the software.
Select the Start button on the desktop. Click Program Files.
Go to the configuration tab and select your printer from the list of available printers.
Click Program Files.
Find "SSC Service Utility" and double click on it to open the program.
Go to the configuration tab and select your printer from the list.
Exit the program. The icon for this program should show up as a small printer icon in your "taskbar" on your desktop.
Click on the program icon in your taskbar.
Click "Security Counter" in the list of options.
Click "Reset Security Counter" to reset the printer. If you kept printing past printer service warnings, you may have been locked out. In this case, instead of selecting "Protection counter", select "Extra" from the list of options under the program icon. Select Soft Reset. This gets rid of blocking. Select Security Counter and Reset Security Counter to reset the printer.

Learn more about the Epson diaper change counter

You can simply type a specific printer model in the browser, for example, “diaper counter reset program for Epson L110”. There is a choice of both free and paid programs for any inkjet printer. This program is necessary because it allows you to track the condition of diapers and change them in a timely manner.

On some models, the block of absorbent pads is easily accessible. They are taken out of the container, washed, dried and put back. Some system administrators direct the drain tube to a separate container located outside the printer. But the counter will work in this case too, because it counts the number of operations during printing.

Epson is committed to ensuring that all devices operate properly to minimize the risk of property damage or personal injury during the life of the product. The printers are designed to stop working at a point where continued use without replacing ink pads could create a risk of property damage from ink spills or safety issues associated with excess ink coming into contact with an electrical component.

Epson offers optional, cost-effective, one- or two-year inkjet service contracts in addition to the standard one-year warranty. Under a warranty or service contract, all hardware failures and service messages are covered by the repair. With one of these options, you can ensure continuous operation even with intensive use up to 3 years.

Another option for dealing with high print volumes is to consider a high end printer with a more reliable duty cycle, such as the Epson Stylus Pro line of printers with larger ink cartridges and lower usage costs.

Sooner or later, the life of the printer's ink-absorbing lining comes to an end, and in the process of printing, not all the ink gets on the surface of the paper. A large part of the ink is driven by office equipment when cleaning the head for printing. The principle of such cleaning is the so-called. forced run of the coloring matter from the cartridge to the parking unit of the device. Further, the ink is collected in the so-called. diaper.

So, a printer diaper is the name of a pad for absorbing ink among office equipment users. Physically, this product is an absorbent material that has a high absorbency of various liquid substances. Its main task is to hold waste ink, which should not get inside office equipment. It is for this reason that this pad is called by analogy with a diaper - a diaper. This element can be made in different ways. In a common version, it is a strip made of a “felt” material with a porous structure. But in some models, in particular, Epson, it is made in the form of a plastic container, which is filled with absorbent material. The capacity of diapers, depending on the model of the device, may be different, but over time, their service life ends.

What happens if the diaper fills up?

The lining has a fairly high degree of absorbency. But with intensive use of office equipment, it gradually fills up and the duration of its operation decreases. But when a specific bar of waste ink is reached, which is counted using a virtual counter system, a corresponding warning appears on the display of the printing device or on the computer screen. Thus, if the diaper is full, then there is a possibility of overflow of the ink to the outside, which will negatively affect the performance of the printer. If the ink pad has reached the end of its life, the diaper may need to be reset or replaced. But in general, printers do not have built-in sensors that could monitor the filling level of these absorbent pads, as a result of which their critical value is determined solely by the software method. When the threshold value is reached, the device automatically stops working. Inkjet printers manufactured by Epson signal a threshold value exceeded in advance.

But it should be said that turning off the printer in some situations is irrelevant. The fact is that in places with dry air, this gasket is only 50 percent full. Therefore, in this case, it could serve for the same amount of time.

What to do if the diaper is full?

The printer does not work, what should I do? To solve this problem, a thorough cleaning of the absorber will be required. Of course, you can take and replace the old absorbent pad with a new one, but it is not always possible to find a suitable piece of felt. And in most cases, they are delivered exclusively on order, and therefore it is not known how long you will need to wait for a new diaper. Therefore, it is better to take a full absorber and completely clean it of ink. Moreover, even an ordinary user of office equipment can cope with such a task.

To begin with, you will need to remove the diaper from the printer, after putting on rubber household gloves and old clothes that you don’t mind getting dirty. To get to it, first unscrew the bolts located on the back of the printer. Then remove part of the device from the right side and unscrew a couple more bolts. Next, you should remove the casing by picking up special latches in the bottom panel, which will need to be carefully snapped off. Walk around the perimeter and lift up this shroud until it comes off completely. Raise the top of the printer all the way by carefully removing it. Next, you will see that there is a cable there - try to pull it out as carefully as possible. Thus, you will get to the insides of the printer, after which you will have to pull the hose out of the pump and get the diaper itself.

Next, put the absorbent material into a container filled with warm water. After waiting for a while, wring it out a few times so that most of the water-soluble paint remains in the water. Thus, it will gradually be washed off until it takes its original form. In this case, the question may arise as to how to wash this piece of felt? In general, ordinary water will work for the current task, but in some cases a good quality cleaning agent can be used.

In the end, you just have to thoroughly squeeze the moisture out of the diaper and dry it. Thanks to this simple procedure, you can save on the purchase of a new absorption material. True, its volume in this case will decrease slightly, and the absorbent properties will deteriorate.

Reset diaper

It may also be necessary to perform a procedure such as resetting the absorber. To reset it, you will need to download special service programs. The SPUA utility belongs to the category of free software for solving this problem. This wonderful program supports a large number of inkjet printer models from Epson. And it is suitable for both old and new devices. Also, the Epson Adjustment program is suitable for resetting, which will help make your printer work in normal mode again. For more information on what to do if the diaper in the printer runs out and the chip that turns off the device works, read in. Thus, the problem of how to reset the diaper is solved quite simply.

In general, if your printer's absorbent pad is nearing the end of its life, then you will either have to return it to working condition again, or resort to a procedure such as replacing the absorber. Please note that it is better not to let the ink flow out onto the table, and when resetting the diaper counter, be sure to clean the absorbent material itself. The main difficulty in this entire procedure is disassembling the printer, removing the diaper and installing it in place, but with the help of the instructions on our website, even a beginner can cope with the task. For detailed instructions on disassembling your printer, select the appropriate model from the drop-down side menu on the right.

This unpleasant inscription in the status of the printer driver usually pops up at the most inopportune moment. Especially if you print a lot on an inkjet printer. In order not to be caught off guard, we recommend that you read this quick guide.
So, let's get to the heart of the problem. If you already have an inkjet printer, or you have just read information about this type of device, then you are probably already familiar with the phrase head cleaning.
What is behind this phrase? In simple terms, this procedure is used to remove ink clots from the nozzles of the print head. Clots form for various reasons: long periods of inactivity, poor quality ink, dry climates, etc. In addition, there are preventive cleanings after a certain number of printed copies.
Where does this ink go? In household appliances, directly to the bottom of the printer, in an absorbent lining. In the people, this printer node was called "diaper".
The lining is designed for a certain number of cleanings. Usually, the more productive the printer, the more cleanings this node is designed for. On professional models, this pad is removable, in the form of a maintenance cartridge, for quick replacement after the ink pad has expired.
But why is this issue often discussed, are the manufacturers really stupider than a steam locomotive, and did not foresee elementary problems. It's all about the famous Russian mentality (well, we're not alone here). The essence of the problem is that household printers are starting to print 24 hours a day, making mini-printing houses out of household devices. It is clear that all this is not from a good life, but the inkjet printer is used far from the modes for which it was designed.

And if during normal household use the gasket is actually designed for the entire life of the printer (several years), then in the hands of skilled printers, the printer asks to replace it after a few weeks of operation. A particularly relevant issue is that the ink pad has expired for epson. It is these printers, due to their omnivorous ink, that are used to print a huge number of prints at a low cost.
In order to avoid draining ink to the bottom of the printer, with this use of household printers, the "waste" drain is taken to an external container.
But the printer knows nothing about such "upgrades" and continues to count the number of cleanings, blocking the work with a message about the "service life of the ink-absorbing lining", so as not to drown in the "waste" ink.
If you are sure that the “diaper” is not full and you just need to bypass the print block, use the PrintHelp program.
1. Download the program from the official website and install it on your computer.
2. Select your printer from the left menu.
3. In the "Management" tab, use the option "Workout counters - Reset workout".

For many popular models, you can reset the counter for free, and for some you will have to buy a reset code from the developers. For very old inkjet printers, you can find additional free software.