Updating software is not available for iPhone. What to do if iPhone doesn't see iOS update? Troubleshoot your iPhone or iPad stuck checking for an update

Hello everyone! Most recently, I faced such a problem - my iPhone categorically refused to update to the new firmware version, both through iTunes and through iCloud. I just displayed the inscription - "Failed to install the software update. An error occurred while loading iOS. " Although, in fact, the update was not only available, but already downloaded to the device. Mystery? Even some! But the "answer" was successfully found by me and now my iPhone is running the latest mobile axis.

The first thing you should pay attention to is whether your device supports the version of the software that you are trying to install. For example, iOS 12 and all its modifications can be "installed" on:

iPad mini 2nd generation, iPad Air and later.
iPhone 5S and all subsequent models.
iPod touch 6.

Have you checked it? Does your technique fit this list? If the answer is yes, then we proceed as follows.

In the main menu, go to settings - basic - profile (at the very end of the list).

Feel free to delete everything that is there.

Reboot your phone or tablet.

After removing it, everything went like clockwork and took a fairly small amount of time (about 20 minutes).

In any case, here are a few more points that can prevent the installation of new software and it makes sense to pay close attention to them:

As you can see, there is nothing complicated - all the tips are quite simple and easy to do at home. But, at the same time, their implementation will almost 100% help to put the fresh version of the software on your iPhone. So, we must act!

Addition! Updating over Wi-Fi may be interfering with an inoperative fingerprint reader. Is the fingerprint sensor not functioning on your device for some reason? Installing a new firmware version is possible only through iTunes. And one more thing - if you are faced with the error "Cannot check for iOS update", then it will suit you. Wow, I don't seem to have forgotten anything :)

After all the manipulations done, the iPhone still does not want to be updated, or do we get some incomprehensible errors? Write in the comments - we'll figure it out together!

In this troubleshooting guide, I'll walk you through how to fix your iPhone or iPad that is stuck with an update after downloading the iOS 13 beta.

Having trouble installing the iOS 13 beta update on your iPad or iPhone as it gets stuck checking for an update error? If so, then this post is for you. Read on and get help.

Downloading and installing iOS updates should be done with just a few taps on the screen. Given that your device has stable internet access, ample storage space and battery life, the update process should start and complete as expected. But this is not a guarantee that everyone will always have a flawless and hassle-free update. Similar to what some iOS device owners have faced while trying to get the iOS 13 beta on their respective iPads and iPhones.

One of the errors encountered is "freeze checking for update". As follows from the message, the update could not be installed because the update check process could not be completed. If you've ever experienced this error while trying to download and install the iOS 13 beta on your iPad or iPhone, you can refer to the related solutions below. Read on to find out what to do if your iPad or iPhone gets stuck checking for an update and can't download and install the iOS 13 beta.

Before we proceed, if you're looking for a solution to an issue with your phone, please try browsing our troubleshooting pages to see if we support your device. If your phone is on our list of supported devices, go to our troubleshooting page and look for similar issues. Feel free to use our solutions and workarounds. Don't worry, it's free. But if you still need our help, please fill out our iOS Issues Questionnaire and click Submit to contact us.

Troubleshoot your iPhone or iPad stuck checking for an update

Before troubleshooting, check and make sure your device is up to date with the beta update. If you are unsure, you can contact your carrier or Apple Support for more information. If you are confident that your device is supported and still cannot download or install the iOS 13 beta and are instead stuck checking for an update, try the solutions below to eliminate software interference.

Be sure to re-download and install the iOS 13 beta update on your iPhone or iPad after completing each of the following procedures to determine if the issue is resolved. Continue to the next applicable solution if necessary.

Performing a forced restart might be the only thing needed to fix the situation, especially if minor firmware glitches are the main triggers. Probably the following happened: the update system crashed, causing your device to stop connecting to the update server and get stuck checking for updates. If you have not already done so, then you should consider a forced restart as one of the first possible solutions. Here's how it's done:

Quickly press and release the volume up button.
Quickly press and release the volume down button.
Then press and hold the power button until the Apple logo appears.

If you are using an iPhone or iPad with a physical Home button, follow these steps to force restart:

Press and hold the Power button and Home button at the same time until the device turns off and restarts.
When the Apple logo appears, release the Power and Home buttons.

Let the device finish downloading and then reconnect to Wi-Fi.

Second solution: turn off wifi and turn it back on.

Occasional internet problems, especially lost Wi-Fi or intermittent internet connection, are also possible causes. If your device does not have a stable Internet connection, it will not be able to establish a secure connection to the update server. Eventually, the update process will be interrupted and will fail. To fix minor Wi-Fi issues like this, switching Wi-Fi might help. Here's how it's done:

Select Wi-Fi.
Then toggle the switch to turn off Wi-Fi.
After a few seconds, flip the switch again to turn Wi-Fi back on.

Performing this setting is also a way to update your device's internet functionality. Occasional internet issues caused by minor firmware crashes and app crashes are also addressed in the process.

Third solution: forget the wifi network, then reconnect.

Using a damaged Wi-Fi network is also one of the possible causes. The same can happen if the Wi-Fi connection is disrupted or corrupted by other saved Wi-Fi networks. To eliminate this, it is recommended to forget about the Wi-Fi network. To do this, Wi-Fi must be turned on so you can view a list of all saved Wi-Fi networks on your device. Then follow these steps to start forgetting Wi-Fi networks:

Go to Settings -> Wi-Fi and make sure the Wi-Fi switch is on.
Go to the list of available Wi-Fi networks.
Select the Wi-Fi network you want to forget.
Then click the information icon "i" next to the name of the Wi-Fi network to forget.
Click Forget This Network to continue.
Then confirm that you want to forget the network.

If you see any other saved Wi-Fi networks, delete them all using the same procedures so that none of them cause conflicts with your Wi-Fi network.

After deleting Wi-Fi networks, restart your device and return to Settings -> Wi-Fi. Turn Wi-Fi off and on. When the list of Wi-Fi networks appears, tap to select your preferred Wi-Fi network, and then tap Join or Connect. If prompted, enter the correct Wi-Fi password to continue.

Fourth solution: reset network settings.

Network problems are usually resolved by resetting the network. Incorrect network configurations can lead to corresponding errors, and the best way to correct them is to restore the original values and network parameters. Doing this reset will not affect the saved data in the internal memory, but it will erase all saved Bluetooth connections, Wi-Fi networks, APNs, and server settings on the phone. If you want to try this workaround, here's what you should do next:

From the home screen, tap Settings.
Select General.
Scroll down and tap Reset.
Select the option to Reset network settings.
Enter your device password when asked to continue.
Then tap on the option to confirm that you want to reset the network settings.

The device will reboot automatically after completing the reset. Once it boots up, turn on Wi-Fi to reconnect to the Wi-Fi network and get back online. Once your device is connected, download and install the iOS 13 beta again and see if it goes through. If your device gets stuck while re-checking for an update, go to the next solution.

Fifth solution: delete the update file from your device.

During the first update you did, a segment of the update file was probably downloaded and saved to your device's memory. But because the update was not complete, this file was corrupted. As a result, your device can no longer download the complete update file. To fix the error, you will need to delete the downloaded portion of the update file before attempting to download again. Here's how it's done:

From the home screen, tap Settings.
Click General.
Click [Device] Storage.
Find the update file in the list of apps and files, and then tap to select.
After selecting the update file, tap the Delete File option.

Confirm the action if you are prompted to do so and wait until the update file is removed.

As a last resort: use iTunes.

If your device continues to freeze when checking for an update after exhausting all of the above procedures, then you may want to consider using iTunes. If you have the latest version of the iTunes app installed on your computer, you can use it to manually download and install the iOS 13 beta. Here's what you should do then:

Connect your iOS device to your computer with the original USB / Lightning cable.
Open iTunes and wait while it detects your device.
When your device appears in iTunes, click on its icon to select it.
Go to the "Summary" section, then click the "Check for Updates" button.
If an update is available, click the Download and Install button.
Enter your password if prompted to continue.

Follow the rest of the onscreen instructions to complete the device update in iTunes.

Still unable to fix iOS 13 stuck checking for update error?

The update server may be currently overloaded or temporarily unavailable, so your device cannot check and receive the update file. If so, there is little you can do on your end other than wait for the update server to be available again. You can confirm the current status of the update server by contacting Apple Support and asking them to check the server status directly from their system.

And if nothing else works, then it's best to just wait for the official release of the final version of iOS 13 this September.

contact us

We strive to help our readers solve problems with their phones, as well as learn how to properly use their devices. So if you have other problems, you can visit our troubleshooting page so you can check out the articles we've already published that contain solutions to common problems yourself. In addition, we create a video to demonstrate how everything is done on your phone. Visit our Youtube channel and subscribe to it. Thanks to.

An error while updating iOS 11 can lead to the system not being installed or getting up incorrectly, making it uncomfortable to use the device. Errors when downloading an update over the air or installing via iTunes can be corrected by yourself, without contacting a service center.

Supported Devices

If you did not receive the iOS 11 update when you connected your device to the Internet via Wi-Fi, and an error occurred when trying to install the update in iTunes, make sure that the model supports the new version of the system.

Please note: you can install iOS 11 on the iPhone 5S, but the iPhone 5 and 5C are not on the list. So it will not be possible to update them in any case, you will have to be content with the capabilities of the previous version.

Checking for an update failed

Errors can occur at different stages of the update. For example, at the very beginning, even before the update is loaded, the following message appears:

If your device supports iOS 11 but can't find the update, follow these steps:

Do a hard reboot. Hold the Home and Power buttons (Power and Volume down on iPhone 7 and above) and hold until the screen turns off.
Check your internet connection. Try connecting to a different Wi-Fi network.
Delete the developer profile if you added it for beta testing (Settings - General - Profiles - iOS Beta Software Profile - Delete).
Try updating through iTunes.

Immediately after the release of the update, failures can occur on the side of Apple servers, which cannot cope with the influx of users. In this case, you just have to wait for your turn to download. If the device detects an update and starts downloading it, but the download was interrupted by an error, wait a little and try downloading the update again.

Pay attention to:

The amount of free space in memory.
Internet connection stability.

If the update does not download over the air, install it via iTunes.

Problems downloading the update to iTunes

Updating via iTunes can also be imperfect. One of the common problems is error 9006, which appears when updating or restoring the firmware. Failure signals the impossibility of establishing a connection with Apple servers.

Error 9006 when updating iOS 11 is fixed in the following ways:

Check your network connection. Make sure the connection is stable.
Quit iTunes and start the program again.
Install the latest version of iTunes. Update the application via the Help menu or completely remove it from your computer along with all components and install the new version downloaded from the Apple website.
Reboot your computer.
Try plugging your device into a different USB port. Use the connectors located on the back of the system unit. Discard adapters.
Disable your anti-virus software and firewall for a while.

Usually, to fix error 9006, it is enough to disable the firewall, which prohibits the connection to Apple servers. The option with iTunes is good in that even if Apple's servers are not responding, you can download the firmware from a third-party trusted source (for example, w3bsit3-dns.com website) and install without any problems.

Hold down the Shift key and click "Restore".
Specify the path to the firmware through the explorer.

iTunes will install the new system on its own, and you will save time downloading the update.

Installation difficulties

If you downloaded the update to your device “over the air”, but there are problems during the installation phase - it fails, or the installation is too slow - try the following methods:

Reboot your device hard.
Check the battery level. Connect the charger.
Make sure the Wi-Fi connection is stable.

If you can't install the update on your phone or tablet, update through iTunes. As a last resort, you can put the device into DFU mode, and then perform a recovery. With this approach, the probability of errors is minimal.

If after the update on the iPhone it stops working or the screen freezes,

Hello everyone! I have a few articles on my blog dealing with iPhone or iPad firmware update issues. However, as practice shows, even such a number of instructions is not enough - new questions constantly appear in the comments regarding this simple, in general, procedure. However, I'm not complaining - always, as they say, I'm happy to help :)

On the other hand, if someone is asked about something very often (and the mistake about which the title is mentioned is not a rare phenomenon), then it is better to write a separate note - this will definitely be more convenient for everyone. You will receive a complete instruction with pictures. I am a pleasure in helping a lot of people. Happiness, joy, pink elephants :) Let's go!

So, here is the full text of the error:

Unable to check for update. The iOS update failed validation because the device is no longer connected to the Internet.

At the same time, the version of iOS can be absolutely any - even iOS 7, even iOS 10 or 11. Apple is true to itself and has not changed this text for many years - for sure, in iOS 12 and all subsequent firmwares, everything will remain unchanged.

And, it would seem, what is there to discuss? It has been said that there is no Internet, so this is exactly what you need to pay attention to! However, not all so simple...

There may be two (!) Reasons for the appearance of the inscription "The iOS update has not passed the check, because the device is no longer connected to the Internet":

There is no network access.
This version of iOS is no longer "signed" by Apple.

And immediately an important point! Do not ignore the first option - they say, I definitely have the Internet and this is clearly not my case! Believe me, maybe yours too :) It is better to play it safe and:

Try to connect to another Internet source (some providers have such "glitches" when for some reason they add the addresses of Apple servers to the list of prohibited ones).
- what if there are now large-scale failures and the problem concerns everyone without exception?

Have you done everything, checked, but nothing has changed? Then we immediately turn to the second reason for the "Unable to verify the update" error - it is that this version of iOS is no longer "signed" by Apple.

It turns out that the company "does not give the go-ahead" for the update. Why? Because this update is not the latest current version. It's Apple's policy - want to upgrade your iPhone or iPad? Install only the latest version of iOS!

To make it a little clearer, here's a specific example:

Your device downloaded the firmware, but you did not install it.
Some time passed and a more recent version of iOS was released.
You are about to update, but the "old" firmware is loaded in your memory!
When you try to install it, it is checked on Apple servers and gets a ban on this action (after all, there is already more recent software!).
The error "Update failed validation" occurs.

True, for some reason, Apple adds a very strange inscription to all this - "since the device is not connected to the Internet." What, in fact, confuses all users. But come on, let's leave this fact on her conscience, and we ourselves will find out - what to do now with all this disgrace?

And the solution, in fact, will be very simple:

After that, you can restart the device, connect to Wi-Fi and wait until the new (already most current) version of iOS is loaded. Loaded? Don't hesitate to update - do it right away :)

Hello everyone. Today heading: "You need to know and be ready for anything!" :) Recently, when updating iOS, a strange situation occurred. How to overcome it will be discussed in the article ...

Symptoms

After the iOS update is downloaded, the installation begins. And unexpectedly the installation hangs on the message "Verifying update" (in the English version of iOS "Verifying update").

At the same time, no matter how much you wait, the message will either hang on, or the device will turn off completely. IPhone / iPad / iPod does not respond to button presses.

Solution

Well, first of all, we reboot the iPhone / iPad / iPod in a "hard" way. We hold down two Home + Power buttons. The phone will return to the state before the update.

What could be the reasons for the error and what to do about it?

Not enough free space to upgrade. More often than not, this will be the case! Go to Settings-> General-> Storage & iCloud.

For a normal update, you need at least 3-3.5 gigabytes. There may be less free space, but if you have 0 to 2 gigabytes of free space, then the probability of the "Check for Update" error increases. Clear memory up to 3 gigabytes and try updating again.

Wi-Fi not working / buggy / dull. In this case, we check the Internet connection. We are waiting for the Internet to work, or we are taking measures for this (restarting the router, calling the technical support of the Internet provider, etc.).

The update was downloaded with errors. In my opinion, the most incredible case ... Come to Settings-> General-> Storage & iCloud. Look for an update in the list of programs. Click on it. Then remove it. And update again.

If none of the methods helps, then there are two solutions:

try to update by wire via iTunes

Fewer mistakes everyone!

Hello everyone! Every year Apple updates the operating system for its mobile devices - that's a good thing. And every year she fails to do it without mistakes - it's bad. And although iOS 11 was released quite recently (and at the time of this writing, it is still in preliminary beta testing), each user can install it and "feel" - what is so new Apple has prepared for us?

True, both during the installation phase and during use, various problems may arise with the iOS 11 update on the iPhone and iPad. Some of them are serious, some are simpler .... In general, we need to understand and fix all this mess. How? I'll tell you now. Let's go quickly and decisively!

Some useful information:

Be sure to back up all data - or.

Devices on which iOS 11 can be installed

Not all gadgets support the new Apple operating system, an update is available for:

	iPad	iPod
iPad Pro 12.9-inch	The iPod Touch 6th-generation
iPad Pro 9.7-inch
iPhone 8 Plus	iPad Air 2
iPhone 7 Plus	iPad Air
iPad 4
iPad mini 4
iPhone 6S Plus	iPad mini 3
iPad mini 2
iPhone 6 Plus

If you did not find a mention of your device in the table, then, unfortunately, iOS 11 is not available for you.

Error "Checking for iOS 11 Updates Failed"

So, you have not yet installed the firmware itself (you just expressed a desire) - the problems are already at the very beginning. And they consist in the fact that:

An error occurred while checking for a software update.

It turns out that the iPhone or iPad does not find the new firmware (although it is!). How to fix it?

Check your internet connection. Use a different Wi-Fi network for downloading.
If it is a beta version, then check for an appropriate profile. If it is final, there are no profiles.
Try it will update via iTunes.

It should also be remembered that at the time of the release of the firmware, a huge number of people are trying to download a new version of the software. Apple servers do not stand up and may fail in their work (). In this case, we cannot do anything - we just have to wait.

Update download error

So, the iPhone or iPad “saw” iOS 11 and started downloading it. However, even here we may be in for a surprise in the form of an update download error.

What are the reasons for this behavior?

There is not enough memory on the device. If the download takes place "over the air", then it is necessary to free up space for the installation file of the software. Don't feel like deleting anything? Use iTunes.
Unstable or weak internet connection - cuts during download.
The notorious overload of Apple servers. We wait for a while and try again.

Don't feel like waiting for the crashes to pass? You can always “trick” Apple and download the firmware from third-party resources (for example, w3bsit3-dns.com), and then “slip” it into iTunes. how to do it.

iOS 11 won't install

So, we have downloaded the new version of the software and everything is ready for installation. We begin to install and ... two options are possible:

What can be done?

Reboot the device hard.
Check the battery charge - it should be more than 50%.
Again, pay attention to the Internet connection.

Nothing helps? Is everything frozen and the strip does not move for a long time? and updated via iTunes - this is the only way to "revive" the device.

Update to iOS 11 via iTunes - Restore Failed

This error is especially relevant for those who constantly use beta versions of software. So, when you try to "roll back" to a stable version of the firmware via iTunes, you may face the fact that the iPhone or iPad "hangs on a string" and the restoration will end in failure.

What to do?

Put the device into DFU mode.
Download the previous version of the firmware (if you have the 2nd beta, download the 1st).
Connect to iTunes, hold down the Shift (Windows) or Alt (Mac) key and click the Restore button.
Select the downloaded firmware.

After installation, connect to iTunes again and restore the device in the usual way.

Perhaps that's all for now. Since now iOS 11 is in the testing stage, it makes no sense to consider "glitches and bugs" in the iPhone or iPad - there are too many of them. But if they remain even after the final version is released, I will supplement this article.

P.S. Be sure to write in the comments about the errors that you encountered - let's try to figure it out and find a suitable solution!

P.S.S. The secret way to get rid of all the faults is to put "likes" and click on the social media buttons. Worth trying!:)

Your iPhone or iPad didn't find an update or reported an error in the settings section? In this article, we will tell you about several ways to solve the problem in which the inscription “ Checking for an update ...«.

In contact with

IOS 10 update not available on older devices?

Much to our regret, Apple has reduced the list of devices compatible with iOS 10. You cannot install iOS 10 on iPhone 4s, iPod touch 5th generation, iPad 3, iPad mini, or older.

IOS update not available (" Checking for an update ..."). What to do?

Is your device jailbroken (Cydia)?

If the Cydia application is installed on your device (jailbreak), then this is the main reason why the iOS 10 update is not available along the way Settings -> The main -> ... The developers of the jailbreak specifically block the ability to update "over the air". The fact is that when you update your iPhone or iPad with a jailbreak, the device turns into a "brick" (eternal chamomile, white apple, etc.).

In order to install iOS 10 on a jailbroken device, you need to perform the procedure. Detailed instructions are posted.

Otherwise, try the methods below:

Restarting the Settings app

The easiest solution is to restart the program Settings... To do this, open the multitasking menu (double-click on the round Home button) and remove the program from it Settings ().

Then reopen Settings, go to section The main and check for an update in the section.

Change the way you connect to the internet

Sometimes, software updates are not found over the Wi-Fi network. In this case, you can try turning off the Wi-Fi network and looking for updates using 3G.

After the iPhone or iPad finds an update, you can turn Wi-Fi back on and download the update for your device.

Resetting "network settings"

Some users report that resetting their network settings helped them solve this problem. In order to reset the network settings, go to Settings -> General -> Reset and select the item Reset network settings.

Please note that resetting network settings will delete passwords for Wi-Fi networks on your device.

Update or restore your device via iTunes

If all of the above methods did not help you, then most likely you will have to update your device through iTunes on your computer. Just connect your iPhone or iPad to your computer and open iTunes... In the device information window, press the key Refresh.

The procedure for updating and restoring software is described in more detail.

Since Apple released iOS 12, many people can't wait to see the new operating system. However, problems have been identified. Found that some users got the error after updating iOS 12. Don't worry, in this article we will share several ways to fix this update issue.

How to fix the problem when updating iOS 12

Method 1: Force Reset iPhone

The iOS 12 update for Apple devices may have been fixed. However, the device may freeze during the update. A forced reset allows the user to resolve any problems that arise at an early stage.

Force Reset for iPhone XS / XS Max / XR / X / 8

1. Press and release the Volume Up (+) button.
2. Press and release the Volume Down (-) button.
3. Press and hold the side button until the Apple logo appears. Do not release the side button even if the screen turns black until the white Apple logo appears on the screen.

Force reset for iPhone 7/7 +

1. Press and hold the Sleep / Wake and Volume down buttons at the same time for a while.
2. Hold the buttons until the Apple logo appears on the screen.
3. After the logo appears, release the buttons and the phone will restart.

Force reset for iPhone 6 and earlier devices

On Wednesday following the iPhone 7 and iPhone 7 Plus unveiling, Apple released the iOS 10 Golden Master (GM) update to developers, followed by a public beta release the following day. The final version of iOS 10 was released on September 13th.

Everyone was waiting for the release of the new firmware, but as often happens with the release of new software, errors appear that prevent installation. For example, today many users are faced with the error "Failed to Update Software", which appeared when installing iOS 10 over the air (OTA).

This is one of the most common problems users face when upgrading to a newer version of iOS. This error was encountered when updating iOS 8 and iOS 9.

The error contains:

Failed software update

An error occurred while loading "iOS 10".

If you are experiencing this problem, then fortunately, we have several solutions to this problem.

Solution 1: Try again

When a pop-up window with an error appears, you will be offered two options - “Close” and “Settings”. Click the Close button to close the error message, wait a couple of minutes, and then proceed with installing iOS 10 again.

Solution 2: Wait a few hours

With the release of the final version of iOS, millions of users are trying to download and install iOS 10. A huge amount of traffic is directed to Apple's servers, which means that there will certainly be some delays. Therefore, it is better to wait for several hours or days until the load on their servers decreases.

Solution 3: Upgrade to iOS 10 using iTunes

If none of the above methods helped, then try connecting your device to your computer and launching iTunes. Then, on the Overview tab, click Refresh.

Solution 4: Install iOS 10 using an IPSW file

As a last resort, you can manually download the iOS 10 IPSW file and use it to update your device. This usually solves the problem since you are not dependent on Apple servers.

This method is recommended for advanced users as it requires you to manually update to iOS 10. If you are a regular user, it is better to wait a few hours and try the update again. If you are anxious to get iOS 10 right now, then follow the steps below to download and install iOS 10 using IPSW files:

Download the iOS 10 IPSW file for your device. Make sure you download the correct IPSW file for your device model.

iOS 10 for iPhone

iPhone SE - iPhoneSE_10.0.1_14A403_Restore.ipsw
iPhone 6s, iPhone 6 - iPhone_4.7_10.0.1_14A403_Restore.ipsw
iPhone 6s Plus, iPhone 6 Plus - iPhone_5.5_10.0.1_14A403_Restore.ipsw
iPhone 5s - iPhone_4.0_64bit_10.0.1_14A403_Restore.ipsw
iPhone 5, iPhone 5c - iPhone_4.0_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPad

9.7 ‑ inch iPad Pro - iPadPro_9.7_10.0.1_14A403_Restore.ipsw
12.9 ‑ inch iPad Pro - iPadPro_12.9_10.0.1_14A403_Restore.ipsw
iPad mini 4, iPad Air 2, iPad mini 3 –iPad_64bit_TouchID_10.0.1_14A403_Restore.ipsw
iPad Air, iPad mini 2 - iPad_64bit_10.0.1_14A403_Restore.ipsw
iPad (4th generation Model) - iPad_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPod touch

iPod touch 6th generation - iPodtouch_10.0.1_14A403_Restore.ipsw

Connect your iPhone, iPad or iPod Touch to your computer.
Go to the iTunes updates section.
Hold down the Option / Alt (Mac) or Shift (Windows) button and click the Refresh button. If you want to completely clear your iPhone to get a "bare" iOS 10 without any data, then instead of the "Refresh" button, click on "Restore" while holding down the Option / Alt (Mac) or Shift (Windows) button ...
Select the required ipsw file you downloaded earlier.

These were all ways to solve the "Failed Software Update" error. Did you manage to solve this problem?

Don't miss the Apple news - subscribe to our Telegram channel, as well as to Youtube channel.