How to disassemble Asus K series notebook. How to disassemble ASUS X53S notebook. Dust cleaning

First, a little background. This laptop came to me after soda was spilled on it. And after a preliminary inspection, it became clear that disassembly of the Asus X502C was inevitable. The reason for this is that it was not detected in the BIOS. HDD... Plus, it was necessary to clear all the internal space of sticky slurry and at the same time solve the problem of loud operation, accompanied by a decent heating of the case. So let's move on directly to how to disassemble an Asus X502C laptop. This is not so difficult to do. First, turn off the laptop, disconnect the power supply, fold the lid and turn it upside down. The picture below shows all the bolts that need to be unscrewed. There will be 11 of them in total.

Put the unscrewed bolts in a separate pile so as not to confuse them with others, of which there will be plenty. Next, we put the laptop on the bottom and open the screen. Further disassembly of the Asus X502C will be performed in this position. Removal of the top panel is carried out together with the keyboard. This requires a flat screwdriver. With its help, we carefully pry the panel from any edge so that a small click is heard. It will indicate that the retainer has come off.

Then you can carefully remove the panel with your hands. But it's much easier to just run a flat screwdriver along the entire face. At the same time, all the latches located on the front side will easily open and the panel will come off without any problems. And the side and rear latches will open by themselves when the panel is lifted further. It should be noted that this way of opening will not affect the appearance in any way. The joints between the bottom and the panel with the keyboard are made using a rubberized layer, which is not so easy to deform.

So the front side is open. But do not immediately try to remove it completely, since power cables from the keyboard and from the touchpad are suitable for this panel.

Therefore, before removing the panel, disconnect the loops. To do this, we put our hand in and unfasten the fixing latches.

Everything. The panel can be completely removed. To perform such an operation, nothing else interferes. The disassembly of the Asus X502C, if you need to get only to this level, is complete. Further, you can perform other smaller operations.

Battery replacementAsusX502C

If the battery needs to be replaced Asus laptop X502C, you must first unscrew the screws that fix it.

The illustration below shows the terminal for connecting the battery to the motherboard.

Disable it by slightly pulling it up.

The battery can now be removed. To do this, we first pull it towards ourselves, and then at a slight angle upward.

The battery has been removed.

Replacement hard disk AsusX502C

Everything is simple here. We unscrew the 4 screws securing the hard drive to the case and remove it.

Dust cleaningAsusX502C

Cleaning the cooling system and / or replacing thermal paste is required if the laptop gets very hot or even overheats. In the case of the Asus X502C, to get to the cooling system, you need to completely remove the motherboard. Those. all the previous steps must be followed.

Next, you need to disconnect the cables connected to the motherboard.

And unscrew the fastening feints motherboard to the case Asus X502C

Removing the motherboard

Turning it over, you can see the fixing screws, a cooler and a radiator for the cooling system.

We unscrew them. Turn off the power supply to the cooler and remove the entire cooling system. Our disassembly of the Asus X502C has reached its climax, since there is, in fact, nothing to disassemble further.

If there is thermal paste available, it is better to replace the old one with a new one in order to avoid re-parsing the equipment later. Now let's deal with another reason for laptop overheating - it is the clogging of the heat sink channels. A radiator is attached to the cooler. It is attached with adhesive rubberized tape. It should be carefully taken to the side.

Then it is executed cleaning Asus X502C dustproof. To do this, it is enough to remove the accumulated "felt boots" with a brush and blow through the channels. You should also remove dust from the laptop processor cooling fan itself.

That's it, cleaning the Asus X502C is complete. And then you can start reassembling the laptop. Do not forget to connect all the cables and tighten all the screws. Otherwise, the Asus X502c may need to be disassembled again.

That's all there is to know about how to disassemble the Asus X502C for cleaning or replacement parts.

Quite often, laptop owners have a question about how to disassemble their device for cleaning. This procedure is simply necessary, since the dust inside the case interferes with normal cooling, which will lead to its breakdown. There are situations when the device needs to be disassembled to replace parts or upgrade. Here the question immediately arises of how to disassemble?

The Asus laptop is a fairly common model, and it will serve as an example. Next, we will consider the order that should be followed in order to do everything easily and quickly.

How and how to disassemble a laptop?

Asus is a famous manufacturer, but its products, like all others, require revision, for which the device must be disassembled. Before proceeding with this procedure, you must prepare the instrument.

First of all, you will need a Phillips screwdriver (you can find its size by looking at the screws located in the back cover). Additionally, you will need tweezers, some paper, hands and eyes. The most important thing in this work is patience, since there are situations when they forget to unscrew the screw and cannot remove the cover or disk, and then an extra effort follows, which leads to disastrous consequences.

Safety regulations

When starting to disassemble the device, it should be remembered that this is an electrical device. For this reason, you can start disassembling the laptop only after it is disconnected from the network. Additionally, remove the battery from the device.

When it comes to assembly, the connection to the network can only be made when the laptop is fully assembled. When disconnecting the loops, you should be careful, as jerks can lead to their damage.

Asus K53S parsing procedure

Next, let's take a look at how to disassemble an Asus k53s laptop. First of all, it is necessary to de-energize the device by disconnecting it from the mains and removing the battery. Now you need to unscrew three screws from the cover, which is located on the opposite side of the battery. This procedure will allow you to remove it and gain access to the RAM and hard drive.

The next step is to remove the Wi-Fi board, which is secured with one screw. Here you need to be very careful, since two wires are connected to this module, to remove which you need to snap off the fastener.

It remains to take out RAM and a hard drive secured with four screws. Next, the procedure begins to unscrew a large number of screws. Remember that the screws located under the battery are shorter than the others.

After all of them are unscrewed, many novice craftsmen are faced with the question of how to disassemble a laptop? The Asus k53s has screws under the keyboard that secure the disc reader. To remove the keyboard, hook it up with a thin object around the edges. After that, six screws and two connectors are exposed, which must be carefully disconnected.

Now we remove the CD-ROM drive case. After removing it, access to three more screws will open, which should also be unscrewed.

That's it, now you can separate the top cover, for which you just need to hook it by the edge. After completing all the procedures, access to the motherboard will open, to remove which you need to unscrew a few screws. If you follow the sequence of the listed operations, then the question of how to disassemble an asus laptop will disappear by itself. The user can easily do all this without spoiling or breaking anything.

Asus x54h - parsing order

When the question of how to disassemble an Asus x54h laptop is raised, then you can refer to the instructions written above, since the models have a similar structure, but there are also small features.

The first thing to note is that Wi-Fi and RAM are swapped under the first cover, but the fastening technology has been preserved. Further, the parsing process goes in the same order as above, but only before removing the keyboard.

In this model, the keyboard has several fasteners, which must be dismantled at the top. Several ribbon cables will open under it, and you will need a thin screwdriver and tweezers to disconnect them. You can do without them, but only if you have thin fingers.

After removing the keyboard and unscrewing the last screws, you can proceed to removing the cover on which it was. This procedure should be done very carefully as there are many latches around the device. Anyone can help in this matter a plastic card... It remains to unscrew a few screws and pull out the motherboard. This completes the disassembly of the device.

We disassemble the Asus n53s

When the question of how to disassemble an Asus n53s laptop comes up, you need to be quite careful. This is because the device has several hidden screws. Disassembly of the device begins with de-energizing it. Next, unscrew all the screws on the back cover and remove the cover, under which the RAM is installed.

Here comes the turn to the hidden screws that are located under the legs of the laptop. They are attached to the device with an adhesive backing. Now you need to remove the keyboard and disconnect the ribbon cable. This procedure should be carried out very carefully, as the wire is very easy to damage.

There are difficulties when removing the motherboard, since some assembly options include a screw under the Wi-Fi module.

Dismantling Asus k53t

A very popular question is - how to disassemble an Asus k53t laptop correctly? To avoid complications, everything should be done in order. First of all, the battery is removed, then, on the back of the device, screws are unscrewed from two covers: under one there is a hard drive, and under the other - RAM and Wi-Fi. Next to the latter is the screw that holds the CD-ROM in place.

Now remove all screws from the back of the device and turn it over. The next step is to dismantle the keyboard, which is done by squeezing the antennae in its upper part, in the corners and in the center. Next, unscrew the three screws located under the keyboard and you can remove the cover. After that, access to the motherboard appears. By unscrewing all the screws from it, you will remove it along with the processor and cooling. This completes the disassembly.

Features parsing Asus x53s

The manufacturer Asus has released a huge number of models, but they all need periodic cleaning. Above, we have already described several options for disassembling a laptop. Asus X53s has a structure similar to other models, so the beginning of its disassembly is similar to them.

You should start work by removing the battery, then unscrew the screws on the back of the device. After that, you can remove the cover, gaining access to the hard drive and RAM. These modules should be removed, it is also necessary to disconnect the wires from the Wi-Fi module.

Now the laptop is turned over and the keyboard is removed. To do this, press the four clips at the top.

The next step is to disconnect the ribbon cable from the keyboard and other sensors. It remains to unscrew the three screws located under the keyboard, and you can remove the top cover. A plastic card or any thin object is suitable for this purpose. Now access to the motherboard has opened, which is quite easy to dismantle.

We disassemble the Asus x550c laptop

Many users wonder how to disassemble Asus x550c laptop. This is due to the fact that the keyboard of this model is removed together with the top panel. Now in more detail.

The beginning of the process, like all models of this manufacturer. After removing the cover of the hard drive and RAM, you should dismantle these parts. Further, the remaining screws are unscrewed with back cover.

Now you should put the device on its edge and use a thin screwdriver to separate the top cover. This procedure should be done very carefully, since the latches are very thin. Do not pull on the cover until the latches are removed in a circle.

After removing the top cover, disconnect the ribbon cable that connects the device to the keyboard. The further procedure for disassembling this model does not differ from those described earlier.

Parsing the screen of an Asus laptop

The question of how to disassemble an Asus laptop also rises in the situation when it is necessary to replace the matrix on the screen. Anything can be the reason for this. In most cases, such a need arises in the event of cracks on the screen.

Here you should be glad standard rules, namely that it is necessary to de-energize the device. Extra care should be taken when removing a damaged matrix.

Now you should start parsing the device, according to the rules described above. It should be disassembled before removing the motherboard. Now you should go to the parsing of the screen. Quite often, the mounting screws are hidden under the rubber bumper. It is attached to a sticky base, which is removed with a knife.

After unscrewing all the screws, carefully insert a knife or a thin screwdriver into the gap between the two halves of the screen. By separating them, you will gain access to the matrix, which is bolted on. Having unscrewed them, the disassembly can be considered complete. Learn all the subtleties described in the article, and the question of how to disassemble an Asus laptop will become irrelevant.

Welcome to my website dedicated to the maintenance of portable personal computers and others mobile devices... This project will be of interest to both beginners and specialists in this field. The main task of this project was to collect in one place information on how to disassemble laptops from different manufacturers. How to clean a laptop, how to change thermal paste. After all, many more than once had to do this with their laptop, the laptop of a neighbor or friend. The material is accompanied by detailed and clear instructions, photo or video material. Now you do not need to waste time looking for instructions on the Internet for disassembling a laptop of the model you are interested in, everything can be easily found here.

How to disassemble an Asus laptop

Asus R503U laptop disassembly, dust cleaning and thermal paste replacement. Traditionally, before disassembling the laptop, we de-energize it by removing the battery. Then, unscrew the two screws and remove the cover from the bottom of the Asus R503U laptop case. Under the cover, you will see a Wi-Fi module, laptop RAM and a hard drive. We must remove all this and take it out. HDD […]

Updated: 24 August 2016 - 01:53

How to clean ASUS K75VJ laptop and replace thermal paste? As always, we turn the laptop over, placing it with the lower cover at the top. We take out the battery from it. We unscrew three screws to remove the huge hatch from the bottom cover of the laptop case. How to do this is shown in the photos below. You need to unscrew all the screws that are marked in the photo. Take out DVD drive to that [...]

Updated: 22 August 2016 - 13:55

We disassemble and clean the Asus N71J laptop. I want to upset you a little, to access the cooling system of this laptop, you will have to disassemble it almost completely. But there is also a positive point for those who like to unscrew the screws and screws. You will have to unscrew a fair amount of them. Our first step is to remove the battery from the laptop. Nothing complicated here. We move the clamps to the side and take out [...]

Updated: 21 August 2016 - 13:41

How to disassemble an Asus UL30A laptop to clean it and replace thermal paste? Outwardly, this laptop looks like this. For safe disassembly of the laptop, we remove the battery from the case. Pulling the battery clips in opposite directions, as shown in the photo, remove the battery in the direction indicated by the large red arrow. Everything is shown in detail in the photo. Before the cooling system [...]

Updated: 10 August 2016 - 04:58

Cleaning the ASUS X51L laptop with replacing the thermal paste. Just in case, I took several pictures of the stickers that were present at this laptop, which we will disassemble and clean today. Turning the laptop over, with the lower part of the case upwards, we notice a rechargeable battery in the lower left corner. It is not the usual oblong look, but almost square. And the dimensions of this battery are not very large. Hooking up [...]

Updated: 11 June 2016 - 02:52

Hello everyone! Today I got my hands on an ASUS K55DR laptop with a typical problem for many laptops - overheating under heavy load.

In 95% of such cases, disassembling the laptop and replacing the thermal paste in it helps.

This is what this article will be about, in which, among other things, you will find detailed video instructions for disassembling this laptop.

ASUS K55DR laptop heats up - what is the reason?

Below is a photo ASUS K55DR laptop motherboard(click to enlarge). Heat, passing through copper pipes, is dissipated on the radiator, which, in theory, should be blown by a fan, and thus remove the "heat" from the processor and video card.

But, over time, dust accumulates in the laptop, and hot air, instead of freely leaving the laptop, begins to "race" inside the case, causing overheating.

You can read more about the problem of overheating in my article on.

How to disassemble, clean and change thermal grease on an ASUS K55D laptop.

In general, I wrote this article as an addition to the video on my YouTube channel ... It is better to see it once by scrolling a little higher than to read the text instruction 100 times. 🙂

But, nevertheless, here I will briefly describe the process disassembly of the laptop ASUS K55D:

We take out the battery.
Remove the keyboard, unscrew 5 screws under it and pull out 2 cables
Unscrew the DVD-ROM screw in the same place, and take it out.
We turn the laptop over, unscrew the cover of the RAM and HDD.
We take out the hard disk, RAM, wifi module.
Unscrew all visible screws, not forgetting about the 3 screws under the DVD-rom.
We turn the laptop over again, and, with a mediator, we open the laptop case around the perimeter.
Remove the top panel of the laptop. She is easily removable
We take out the cables (4 pcs), and unscrew the 2 screws on the motherboard and on the fan.
We take out the motherboard by prying the latch on the right.
We unscrew the cooling system, clean it from dust and old thermal paste.
We apply new thermal paste, put the cooling back on.
Putting it back together
PROFIT !!!

And finally, this is how it looks maternal ASUS board K55D from the back side... Suddenly someone will come in handy. 🙂

By the way, here you will find detailed instructions.

We disassemble the laptop Asus series K

A warning

This article is not a guide to action! You are solely responsible for collecting and disassembling your device.
Many manufacturers do not accept warranty obligations if the device has been disassembled by the user. If you do not want to void the warranty for your device, check the warranty conditions in the documentation or with the device manufacturer.

Used tools

Remove the battery. Remove the screw that secures the bottom cover.

Remove the four screws located on the bottom of the laptop that secure the bottom cover.

Slide the bottom cover in the direction shown. Remove the bottom cover.

Access to memory modules, hard disk, CMOS battery, cooling fan, DVD drive, card wireless and a heatsink with a processor.

Remove the screw securing the DVD drive. Slide the DVD drive to the right and remove it from the laptop case.

Remove the four screws securing the hard drive. Slide the hard drive to the right to disconnect it from the connector on the motherboard.

Remove the hard drive assembly from the laptop chassis. Now, if necessary, you can remove the hard drive from the tray and replace it with a new one. As you can see, this is a SATA drive.

Slide the latches on either side of the memory module to the sides, and when the memory module slides out of the slot at a 30-degree angle, gently remove it. This laptop model has only one slot for a memory module. It looks like some of the memory is integrated into the motherboard. I cannot say with confidence that all Asus K series laptops use only one slot for a memory module.

Remove the three screws securing the fan. Disconnect the fan cable from the motherboard. The fan can now be removed.

Removing the keyboard

The keyboard is secured with small spring clips. In the photo they are marked with yellow arrows.

To open the latch, simply push it in with a sharp object while lifting the keyboard upward.

When all latches are open, you can lift the keyboard as shown in the following illustration.

Gently flip the keyboard over and place it on the palm rest. To disconnect the keyboard cable, you must open the connector latch.

The keyboard cable is sandwiched between the white base of the connector and the brown retention tab. The following illustration shows the connector with the latch closed.

Slide the brown tab about 2 mm to the left (never more). The locking tab should remain on the white base. The following illustration shows a connector with an open latch. You can now disconnect the keyboard cable from the connector.

Finally, carefully remove the keyboard from the laptop case and replace it with a new keyboard if necessary.

Reassemble in reverse order.