Disable the touchpad on the laptop. How to disable the touchpad on a laptop: clear instructions

On many Lenovo laptops, including the B590 model, there is often a problem when, after installing the operating system, the touchpad does not turn off with the Fn + F6 combination. Most people use this combination all the time, as when using a mouse, the included touchpad can only get in the way.

But now there is a way to do auto disable touchpad when a mouse is connected to the Lenovo B590 (possibly on other models with Synaptics touchpad). This is done simply, follow the instructions:

Remove all old touchpad-related drivers (you can do this by going to Control Panel -> Programs and Features).
Install fresh drivers from the official Lenovo website from here, reboot the laptop (after installation and reboot, a combination of Fn and F6 will work).
Then download the file by software, unzip it and run it. It will write Synaptics driver entries to the registry, which will open up an additional feature. But more on that later, first restart your computer.
Immediately after rebooting, go to Control Panel -> Mouse and tab Device parameters.
Check the box “Disable internal decree. device when connected. external decree. USB devices”, Click Apply and OK. This is the additional function that appears only in official drivers and when launching a special file, which can be downloaded in the third paragraph.

How to disable or enable the touchpad on Lenovo laptop

The Touchpad performs the same functions as a mouse, but when using it, you do not need to move the device on the surface to move the pointer, but with your finger over the device, which is more ergonomic.

But some users still use the laptop as a desktop computer and prefer to use a mouse. In this case, the active touchpad can be inconvenient, as it is difficult to avoid accidental touches of the touchpad when using the mouse.

Especially for this, there is the possibility of turning off the touchpad. If, for some reason, you could not do it yourself, you can contact Lenovo laptop repair technicians.

Using a keyboard shortcut

The manufacturer provides so-called hot keys. Examining the keyboard key icons, you will find a symbol indicating that this button is intended to disable the touchpad. When connecting a touch panel, you can use the same combination. By pressing this key at the same time with the "Fn" key, you will perform the desired action

Using system parameters

If your Lenovo laptop does not have such a key, but has a Windows operating system, then you can configure the settings you need using special program Synaptics, which controls the touchpad. This program must be installed along with the drivers for correct work touch panel.

You need to open the options window for the mouse through the control panel and configure the options by unchecking the USB device disconnect checkbox.

Disable via BIOS

Using such a radical technique for disabling the touch panel, as through the BIOS, in the Advansed tab, set the Disable value to the Internal Porting Device item. Now, unless you also activate this device, in any other way you will not be able to turn it on.

With these actions, you can easily disable the touchpad, if you need it, by choosing the method that is most suitable for your conditions.

Touchpad not working on Lenovo IBM laptop? Now you do not know what to do and what to do right? We advise you to seek qualified help as soon as possible. First of all, it is important to determine the cause of the malfunction, and then fix the breakdown. Moreover, the sooner this is done, the better, since over time the situation only gets more complicated, and it becomes more and more difficult to fix a laptop. Our service center will certainly help you, as we have masters who perfectly know their job.

You wonderwhy is the Lenovo IBM touchpad not working?

Consider all possible options so that you can draw conclusions on your own:

1. do not rush to get upset. First of all, it is worth checking if the touchpad itself is disabled. This is done with function keys Fn + F5-12. On different laptop computers there will be a combination. Look through all the F keys, one of them will be painted with a touch control panel icon;

1800 + 990 rub.

Is free

2. the second option - the device is disabled by software. Responsible for the operation of the equipment system utilities so it is important to check their condition. In the lower right corner there is a special program icon, with its help you can quickly disable and enable the touchpad. If everything is in order here, then look for the error in the device manager;

3. The touch panel is connected to the printed circuit board with a ribbon cable, which is fixed in a special fastener. Often during transportation, when the PC is exposed to shocks and vibrations, the ribbon cable retainer may open or break off. It is possible to identify a problem of this kind only in the conditions of a service center after complete diagnostics... In this case, a complete replacement of the loop or restoration will help. If it just comes off, our technicians will plug it back into the connector. It takes only a few minutes;

4. Happens when the control device itself fails. Repairing a Lenovo IBM touchpad is a rather complicated operation. We do not advise you to repair it yourself, as this will only complicate the situation. Replacing the touchpad on a Lenovo IBM laptop requires certain knowledge and experience from the contractor;

5. If the touchpad and keyboard on a Lenovo IBM laptop do not work, it is constantly buggy, as a rule, this is due to a malfunction of the printed circuit board. Often one of its important components - the south bridge - fails, and then you cannot do without the help of specialists. We are always here to help you.

What to do if Lenovo touchpad does not work well or is buggy?

As a rule, poor performance manifests itself as follows: it is impossible to set the pointer at the required point, the cursor does not listen at all and constantly jumps across the screen, it can move too quickly or slowly. The most common reason is dirt that gets on touch pad... The situation will only change after it has been cleared.

Lenovo IBM laptop touchpad problems? He has become too sensitive, which prevents him from working properly. First of all, you need to check the current settings. To do this, go to the control panel, where you need to find the "Mouse" item, and then play with the settings until it becomes convenient for you to control.

Sometimes you have to face the problem when scrolling on the touchpad of a Lenovo IBM laptop does not work.

As a rule, this indicates that there was a failure in the program. If the scrolling on the Lenovo touchpad does not work, you will need to install or update the existing drivers. After all, you need to install the software that suits your Lenovo model.

Users often contact us with the question why the touchpad buttons of the Lenovo IBM laptop do not work? Usually does not work left button touchpad Lenovo IBM through liquid or dirt. By similar reasons does not work right button touchpad Lenovo IBM. Only cleaning will help here.

Whatever you have to face, if a Lenovo IBM laptop or netbook begins to malfunction, contact our service center... First of all, we will carry out comprehensive diagnostics absolutely free of charge. Our trained technicians will repair Lenovo 3000, IdeaPad, ThinkPad as soon as possible.

Touchpad(TouchPad) is a device that replaces the functions of a traditional mouse in a laptop. The touchpad is controlled by touching a finger in a specially designated area, the functions of the buttons can be duplicated by touching and / or are provided by separate buttons located below the touch area. In this article, we'll go over all sorts of ways on how to enable the touchpad on Windows 10 and other versions. The need for this may arise in the event of an accidental shutdown, software failure, and for other reasons.

Turning on the touchpad using the function keys

Almost any laptop has a function key Fn, which is responsible for quick access to control additional functions of the laptop. It is usually located between the left Ctrl button and the key with Windows logo, often painted in a different color from the main keyboard keys. The touchpad on Windows 10 and other versions is controlled using function keys, provided that the drivers are installed on it correctly.

In order to enable a function, you must simultaneously press the Fn key and the key with the required function. In our case, the touchpad power key is usually located in the row of F keys and is symbolized by the image of the touchpad and sometimes a hand touching it. Depending on the manufacturer of the laptop, the image may differ, but is almost always completely understandable to the user. On a Lenovo laptop, the key looks like the picture and provides the basic value of F6.

After pressing Fn and F6, the state changes (on / off).

Enabling and disabling the touchpad using BIOS

BIOS- software, which contains all the information about the hardware of the computer and the management of some of its settings. To make sure the touchpad is turned on initial settings laptop, you need to go to the BIOS. When you turn on the laptop, a prompt appears for a moment on how to enter the BIOS, these can be the F1, F2 and Del keys.

After entering the BIOS, do not change any parameters that you do not know about. Careless actions with this tool can disrupt the laptop's performance.

In the BIOS menu, you need to find the item " Internal Pointing Devices", Its value should be set to" Enabled". If set to " Disabled", It means that it is disabled. After that, you may need to repeat the activation procedure using the function keys.

Installing drivers on Windows

The most common reason for a lack of response from a touchpad is incorrect or missing software. In order for it to turn on, the drivers corresponding to it and the operating system are required. You can find a driver for your device on the official website of the laptop manufacturer, after that you need to select operating system and install it.

Installing and updating the driver using Windows

If for some reason you cannot find the driver on the laptop manufacturer's website, then you should use the built-in driver update system in Windows. To do this, you need to open the device manager. The easiest way to open Device Manager in Windows is to press the Win + R key combination and enter the command devmgmt.msc In the window that opens, after clicking OK, the Device Manager will open.

In the tab “ Mice and other pointing devices"Will be a list of all mice and other pointing devices. Even if your TouchPad is not marked, but “ PS / 2 - compatible mouse”, Then its driver should be updated. To do this, select the corresponding object and press the key context menu on the keyboard (looks like a list or a combo box cursor). Select " Update drivers ...”And press Enter.

In most cases, it is the driver from the manufacturer's website that solves the problem with a non-working device.

After updating drivers or installing drivers from the manufacturer's website on a laptop Lenovo touchpad appears differently in Device Manager, which means the driver has been reinstalled.

How to customize the touchpad

A properly configured touchpad can make working with a laptop much easier. In order to get into the settings, you need to go to " Control Panel", Select the display of elements" Small icons"And select the item" Mouse". This window will contain all the basic settings for pointing devices and additional settings in the case of installed software from the manufacturer. Here you can turn the touchpad on and off.

Company Synaptycs allows you to perform many actions with the device through its software, which opens from the Windows tray:

turn on and off;
adjust the intensity of the pointer movement;
customize scrolling options and other options.

Without installed software from the manufacturer, the device in most cases works properly, but additional functions are not available.

Setting up a touchpad from other manufacturers is similar.

How to disable the touchpad on a laptop

In addition to problems with turning on, the included touchpad often interferes with the user's work due to involuntary touches with his hand. The shutdown methods are the same as for turning on.

Exceptions and nuances

On some laptops, turning the touchpad on and off is done using a specially made recess (button) in the corner of the touch area or a separate button that does not require pressing Fn.

If none of the software methods work and the device remains turned off, it is possible that it is defective. Remember whether you spilled even a small amount of liquid on a laptop or whether it was recently fully disassembled to clean it from dust, perhaps the ribbon cable was not trivially connected during assembly.

If after Windows updates 10, the touchpad does not work, then the first thing to do is to update the drivers by downloading them from the manufacturer's website. In some cases, the touchpad should be removed from the device manager and the computer should be restarted. In this case installed driver will be reinstalled automatically.

Some touchpads are configured to turn off automatically when an additional pointing device is connected. These settings should also be found in software from the manufacturer.

Conclusion

If you have any problems with turning on / off the touchpad, you should be guided by the following procedure:

Check and update drivers. Do not forget that for the correct operation of the function keys, drivers are required not only for the touchpad, but also for the keyboard.
Check status in BIOS.
If the laptop has recently been disassembled, then you should contact the person who assembled it.
If it is impossible to turn on, contact the service center.

In most cases, problems can be solved by simply reinstalling the drivers.