How to install windows 10 without backup. We refuse to reserve a copy of the new OS. Windows Recovery Environment Paths

Windows Backup creates copies of all files in your selected libraries, folders, and drives. You can also include a system image in the backup. This article will show you how to set up backups in Windows 10.

Not often, but there are times that it rains HDD and there is no way to recover data from it. It is always recommended to do backups required files to another disk or to cloud storage... The backup will save you many surprises.

Configure Windows backup.

1. Go to the "Start" menu and open "Options";

2. Open "Update and Security";

3. On the left side, select "Backup Service", on the right side, open "Go to the" Backup and Restore "section (Windows 7)";

4. Click on "Configure backup";

5. Data archiving will start;

6. Choose where you want to store the backup, you can keep the copies on the same hard drive, which is not recommended! You can also create copies on external media or to a network share, which is more reliable. In this window, select the medium to which you want to save the backups or a network share, and then click "Next".

7. If you leave the checkbox "Provide Windows with choice" - Windows will back up the files saved in libraries, on the desktop and in standard Windows folders... Windows will also create a system image that you can use to recover your computer in case of a problem. These objects will be archived regularly on a schedule.

If you check the box "Give me a choice" - you can select libraries and folders, and also specify whether to include in the backup system image. The selected items will be archived regularly on a schedule. After making your choice, click "Next".

8.If you are in previous paragraph selected "Give me a choice" - in this window, check the boxes that you want to include in the backup. Once selected, click Next.

9. Click on "Change Schedule";

10.You can choose how often to back up according to the schedule, on what day and at what time. When you select the one you want, click "OK".

You can also disable scheduled archiving and start it as needed, for this you need to uncheck the "Perform scheduled archiving" checkbox. Click OK.

12. The backup will start.

13. When the backup is over, you will find a copy on the disk that you specified during setup. Also in this window you can start the backup whenever you want by clicking on "Back up data now".

That's all for today, if you have any additions - write comments! Good luck 🙂

vynesimozg.com

Windows backup (How to disable?)

What is windows backup or what is also called Windows file backup. This is a process where the system itself backs up itself. As a result, when your Windows crashed, you can restore it. (This is in theory) in practice, such recovery is not effective. However, the system makes copies 2 times a day.

It is up to you to disable or not disable this option. For example, I turned off this crap. Since it slowed down the robot of my computer a lot, and this did not suit me. In addition, I believe that rolling back the system using this Reserve copy... It will save you only for a while, until the last archiving, then everything will fly off again. So it was with me. Maybe someone is fine. But I am describing my case.

And so we disable this archiving and prevent windows backup. First, go to Start / Control Panel and select Administration. Then click on the shortcut (Services). You should open a window (Services) in it we are looking for (Module Service), click right click mouse and select (Properties). Further in the (General) tab there is such an inscription (Startup type) set (Disabled). Close the window and reboot the system.

After the reboot, we see that in the lower right corner, where you previously had a checkbox with a stopwatch icon, is now just a checkbox. That is, no archiving occurs. So you did everything right. And the system began to work better. With that, you will no longer see the pop-up message about Windows backup and file archiving.

If something is not clear, see the form of the instruction, in which I showed everything in detail.

www.win7ka.ru

Backing up and restoring a Windows 10 image

In this article, we will look at how to create an image backup. Windows systems 10 on a separate external drive. The system image is a complete copy of the computer data (includes absolutely everything: how system Windows files and user-installed programs and their settings, personal data and user documents). In addition to the system disk data, the image can include data from all disks connected to the system. Then we will try to restore the system performance from the resulting image.

How to create a system image backup in Windows 10

To create a backup copy of the system image, we will use console utility wbadmin. We will store the system image on a separate external disk (it can be a partition on the current disk, but this is much less reliable), which should have enough space to store a complete copy of the system.

In the search box, type PowerShell, in the list that appears, find Windows PowerShell and run it with administrator rights.

In our example, we want to create a complete copy of the system (located on the C: \ drive), including all the necessary partitions necessary for the system to work (including partitions with the manager and boot configuration) and save the resulting image to external drive E :. The command to create an image in this case will be like this:

wbAdmin start backup -backupTarget: E: -include: C: -allCritical -quiet

If you need to include other partitions or disks in the image besides the system one, the command will look like this:

wbAdmin start backup -backupTarget: E: -include: C:, D:, F:, G: -allCritical -quiet If you want to save the system image to network folder:

wbAdmin start backup -backupTarget: \\ Remote_Computer \\ Folder -include: C: -allCritical –quiet

The command will take certain time depending on how much data gets into the image being created.

After the wbAdmin utility finishes, the WindowsImageBackup directory containing the system image will appear in the root of the target disk.

Restoring Windows 10 from an image

To restore the system from an existing image, we need:

• Windows 10 / Windows 8 installation image on DVD disc or USB flash drive(how to create such discs from official Windows 10 images) or a system repair disc
• V BIOS settings change the boot order of the system so that the system boots from DVD / USB disk first

Boot from the installation / boot disk. Click Next on the first screen.

Click on the Repair your computer button in the lower left corner.

Then go to Troubleshoot -> Advanced Options -> System Image Recovery.

Select Windows 10 from the target OS list.

The installation wizard will scan the mapped drives and find a list of previously created backups.

Select the image you want to restore from the list of available images.

Check the Format and repartition disks option. In this case, the Recovery Wizard will delete all existing partitions on the disk and re-create the partition table in accordance with the partitions in the image.

It remains to confirm the system restore from the image.

After completing the recovery wizard, boot from hard disk(do not forget to change the priority of the boot devices) and make sure that the state of the system matches the state at the time of imaging.

winitpro.ru

Windows 10 backup

I recommend that you familiarize yourself with 4 options for how to back up Windows 10. Either through built-in tools or free utilities. You will also learn how to use it to restore your system when needed. I want to clarify that this is a complete image of Windows 10, containing the entire list of installed utilities and settings. That is, when restoring a PC or laptop through a backup, the user has the state of the system that was when we created our copy. What is its purpose ?!

First, to be able to quickly return the system to its original state. After all, such a process is much less time-consuming than the usual reinstallation and adjustment. And even easier for dummies. I note that it is more expedient to create an image of the system immediately, after clean install and driver settings. Because the copy in this case is not voluminous and is quickly formed.

Back up Windows 10 with built-in OS tools

The easiest way is to back up and restore the control panel.

How do I find these options ?! there are two options: - type "backup" in the search;

1. Click on "create a system image"

2. Choose where we will save: hard disk drive, DVD or network folder

3. Note what disks will be backed up. A priori, this is a reserved and system partition. (WITH:)

4. Now "archive" and wait for the end of the process. No more than 20 minutes.

5. When the procedure is over, you will be asked if you want to create a recovery disc. In the case when the user does not have a flash drive or disk with Windows 10, it would be reasonable to create one. It will be useful when using a backup.

This completes the creation process.

Restoring Windows 10 from a backup

The user comes to the recovery environment either from a working operating system, which requires administrator rights, or from a recovery disk:

1. Through the working OS: start - options - Update and security - Recovery and security - Special boot options - Restart now. Sometimes there is no "Special Options" section. In this case, you need to exit the OS, and click in the lower right corner on the power icon that appears on the lock screen. Then reboot while holding down "Shift".

2. Using the installation disk, or Windows 10 drive. We start from one drive. For example, - Boot Menu. In the field that appears, you need to click on "System Restore".

3. At the moment when the device is loaded using the recovery disk, the environment of the same name opens.

In it, you should note the following: "Troubleshooting" - "Advanced options" - "System image recovery".

If the system detects an image of the system on a DVD or a railway, it will instantly make an offer to recover from it. But you can also manually mark the image of the system yourself.

As the next action, the user may be offered (or not offered, it all depends on the configuration of the elements) to mark the partitions on the disk to be overwritten from the backup. Here it should be understood that if the user created only an image of the C drive and after that during the whole time did not change anything in the structure, then there is no reason to worry about saving information on D and others.

When the process is confirmed, it will accordingly begin. After its completion, in case of a successful completion, it will be necessary to load the HDD into the BIOS and make it in the top ten in the form in which you saved it in the backup copy.

Create a Windows 10 image using DISM.exe

By default, this program is already available on the system. Helps to create an image of Windows 10, as well as restore from a backup. Similarly to the above option, after the following actions, the user should have an absolute copy of the operating system and what is contained in the system partition in its current state.

The first thing you have to do to create a backup copy is to boot into the tens recovery environment. And not by means of "system image recovery", but "Command line".

Follow the instructions: 1.diskpart

2. list volume (you need to pay attention to the letter denoting the system disk - in the recovery environment it will not necessarily be C. Which disk is the one is determined by its size or disk label). At the same time, you need to remember the drive letter for saving.

3. exit 4. dism / Capture-Image /ImageFile:D:\Win10Image.wim / CaptureDir: E: \ / Name: ”Windows 10”

Here, the D: drive is the one to which the backup will be saved, named Win10Image.wim. Given that the system is located on E. After running the command, you will need to wait for the copy to be prepared. After that, the message "Operation completed successfully" will become available. Everything, then you can exit the recovery environment.

Recovering from an image created in DISM.exe

The copy that was created in DISM.exe is applied, also in the environment Windows recovery 10. Moreover, much still depends on the situation. If the need for recovery appears, the procedure may be different. In any case, the system partition of the disk is formatted first. Let's consider the option when the hard disk has a partition structure, namely, drive C, also a reserved partition, and others.

Follow the instructions: 1. diskpart 2. list volume. After this command is executed, focus on the section labels. 3. select volume N. N - ordinal designation of the system partition volume.

4.format fs = ntfs quick (the partition is being formatted)

5. If the user suspects that the Windows 10 bootloader is not functioning well, I recommend doing points 6-8 as well. And when you just need to rollback the OS from the backup, we skip these steps. 6. select volume M - (M - number "reserved") 7. format fs = FS quick - (FS - (FAT32 or NTFS)) 8. assign letter = Z - we still need this stripped shirt, we denote it with the letter Z). 9.exit

10. dism / apply-mage /imagefile:D:\Win10Image.wim / index: 1 / ApplyDir: E: \ - here you can see that Win10Image.wim is located in D, and the section where the user is restoring the OS is E).

When the deployment is completed on the system partition, if there is no damage (item 5, above), you just need to leave the recovery environment and boot into the restored system. Well, if you followed steps 6-8, you still need to do:

1. bcdboot E: \ Windows / s Z: - where E is the system partition and Z is Reserved. 2.diskpart 3.select volume M (the volume number that we learned earlier). 4.remove letter = Z (remove the letter of the reserved partition).

Next, you will have to leave the recovery environment and reboot. Windows 10 will be loaded in the previously saved version. Or, when the user does not have a partition to boot on the disk, he must first create one using a diskpart of 300 MB, for UEFI and GPT in FAT32, for MBR and BIOS - NTFS.

Windows 10 Backup to Aomei Backupper Standard

There is also another way to make a backup - the Aomei Backupper Standard utility. Most users will regard this option as the most acceptable.

First run it, then go to "Backup", where you define what parameters you will create a copy of. Here it is the system image - System Backup.

It is required to indicate the name of the copy, plus where the image is located - this is Step 2. The location can be any folder, disk, or a network location. The user has the ability to select options in the "Backup Options". However, one must understand that for the "teapot" the settings that are set a priori will be the most optimal. You need to click "Start Backup" and wait for the end of the process of creating the image.

Subsequently, it will be possible to return the computer to the saved position directly through the interface. But I advise you to do it in advance boot disk programs. This is necessary in order to be able to boot and recover in case of startup problems. It is possible to create this drive through the item "Utilities" - "Create Bootable Media".

When booting from USB and CD Aomei Backupper Standard, the program window will be available. Select "Restore", there is the item "Path". You should set the path to the copy that you saved (in the case when it did not appear in automatic mode location). It is required to select it from the list, then click "Next".

Make sure that the Ten will be restored to the required locations. Then click "Start Restore" to start using the backup. Download Aomei Backupper Standard for free at the office. website http://www.backup-utility.com/

Macrium Reflect Free - Windows 10 backup software

I want to tell you about another free program. It is relatively simple, easily backs up, creates images of hard drives, etc. We act by analogy with the above example. First, go to "Backup", then select "Backup Windows", after which we stop at the disk partitions that are located in the image. We mark the save location.

Two options for recovery: using the program itself or using a flash drive / disk created in the menu, in "Other Tasks" - "Create Rescue Media". A priori, the drive comes from Windows 10, files are loaded from the Network for it.

The utility is rich in many settings and options, although the default options will be enough for beginners to create a base copy. Download here http://www.macrium.com/reflectfree.aspx

Finally

Of course, I have only listed some of the options for creating images and backups. There are many utilities for this purpose, as well as tools command line... I advise you to remember that Windows 10 already has a built-in image with which you can reinstall it in auto mode.

In contact with

classmates

increaseblog.ru

Windows 10 backup

In this article, we will take a look at how to back up your Windows 10 entire operating system to this moment with all installed programs. If suddenly the computer stops working normally and you decide to reinstall the OS, then Windows 10 will provide an opportunity to reset the settings to their original state.

Resetting the system is essentially a rollback to the state that was immediately after Windows installations 10. If we have a backup copy of Windows 10 with all installed programs, then we literally get a working computer in a few minutes, and we will not need to install the programs again.

How to back up Windows 10

To create a Windows 10 backup, go to Control Panel >> Update and Security >> Backup Service >> Backup and Restore (Windows 7)

In the window that opens, on the left side, click "Create a system image"

Next, at this stage, you need to choose a place where we will store a copy of the system image. By default, the system itself suggested the desired storage partition. But there are also other options available for saving a backup. As we can see, in addition to saving information on the hard disk, it is possible to save to a DVD - disk and to a network folder, if any.

Wait until the end of the process, archiving will take 15-20 minutes. The Windows 10 backup will be saved to "Local Drive D" and will be named WindowsImageBackup. Now we have the ability to restore the entire Windows 10 system in working condition computer.

As you can see, we did not do anything complicated, so after installing Windows, after installing all the drivers, everything required programs- be sure to create a backup copy of Windows 10, so that in case of problems, you can quickly roll back the system back.

Windows 10 Backup with Aomei Backupper Standard

Perhaps the easiest way to back up Windows 10 is to use a special free program to create a backup or restore the AOMEI Backupper Standart system.

After you run the program, go to the "Backup" tab. Here are 4 options for backing up:

• System backup
• Backup hard drives to the image file;
• Backing up partitions and dynamic volumes to an image file;
• Backing up files and folders to a file-image.

As you already understood, we need to select the first option "System backup". Next, specify the name of the backup and specify where the copy of Windows 10 will be saved. The program itself can choose a suitable location, but you can also specify the path to save yourself in "Step 2". This can be a folder, drive, or network drive... We press "Start".

AOMEI Backupper Standart can be downloaded from the official website for free: http://www.backup-utility.com/download.html

The standard functionality of returning Windows to life in critical situations, if the system crashes, or even does not boot at all, is not very popular. Microsoft itself inadvertently helped to prevent ordinary users from finding this tool in the jungle of system settings. Even in the Windows 10 version, where important system settings moved to the "Settings" application, in the "Update and Security" section you will see only the option and mode with special boot options, which allows you to restore Windows from a system image, in fact, from a backup copy. But the function of creating this very image of the system must be looked for inside the control panel, and preferably under the guidance step by step instructions... This will be shown below. In this article, we will look at how to create a backup of Windows 10 with its regular functionality and how the system recovery process works.

1. Standard Windows 10 backup functionality

Windows 10 inherited the standard backup function from Windows Vista. Like third-party backup programs, a backup created using the built-in functionality is a snapshot of the system with all its settings, boot sector, installed programs and user files stored on the system disk.

All of this can be restored from a backup if in running Windows will fail. Even if the system stops booting, you can restore it to working capacity from the recovery environment, called by the F8 key when the computer boots. In this environment, you can start the process of returning the system to the state from the backup. You can get into the recovery environment of non-boot Windows 10, if not by calling the F8 key, then in two other ways. Windows 10 Recovery Environment is included with the system installation disc. For critical cases, you can specially prepare a Windows recovery disk, this is provided by the standard functionality of the system.

In terms of options for invoking a non-bootable recovery environment Windows standard functionality as a backup tool outperforms third-party backup software. But this is his only winning moment. In all other respects, the native functionality, alas, is far from perfect.

However, the backup copy windows and its restoration with the help of standard functionality is the basics for those who want to master the potential of the operating system from Microsoft.

2. Creating a system image

In Windows itself, the term "backup", as in third-party backup programs, is not used, but the concept of "system image" is used. For the function of creating this very image, let's go to the control panel. To do this, we will use context menu on the Start button.

In the "System and Security" section of the control panel, we need a subsection "Windows 7 Backup and Restore".

You can also get directly to this subsection - using the system search.

Click "Create a system image".

Next, the window for choosing the location for storing the image will follow. This can be a non-system disk partition, another hard drive (internal or external), or network resources... It is even possible to store the system image on multiple DVDs. In our case, the partition on the second connected hard disk is selected. This is a good choice for storing important data, such as an operating system backup. In the future, Windows can be recovered even if the main hard drive, which houses the system partition, fails. Click "Next".

The standard functionality provides not only for copying the system partition with Windows, copies of existing non-system disk partitions can be included in the image. Backing up non-system data through native Windows functionality is not The best way to ensure the safety of this data due to inefficient use of disk space. Nevertheless, it is better to resort to third-party software to back up user data. Therefore, in our case, the system image will include a preinstalled configuration - a partition with Windows and the space reserved by the system. Click "Next".

In the window for confirming the parameters of archiving, click "Archive".

When the image creation process is complete, Windows 10 itself will offer to prepare a recovery disk for the future.

This offer should not be discarded if we are dealing with a computer device with a CD / DVD drive. And, of course, if you have a blank CD or DVD disc. If you run into serious problems with the system, it will be easier to boot from the recovery disc than using the F8 key when starting the computer. The response time of this key is difficult to catch due to the reduced time Windows startup 10. System version 10 inherited this feature from version 8.

After inserting a blank CD / DVD into the drive, click "Create Disc".

You can return to the Windows recovery disc creation process at any other time. In the control panel window, from which we began the process of creating a system image, there is a button "Create a system recovery disc".

Close the system image creation window.

That's it - now the system image will be quietly stored for itself until the need for resuscitation of Windows 10 becomes necessary.

If you run into problems with your system, the first step is to get to its recovery environment. It is in this environment that the opportunity to apply the newly created image will appear.

3. Paths to Windows Recovery Environment

Working system

If you have problems with Windows 10, but they did not affect its ability to boot, you can get into the recovery environment using the "Settings" application. In the "Options" select "Update and Security".

F8 key

If Windows does not start, you can try to get into the recovery environment using the above method using the F8 key. The key must be pressed before the appearance Windows logo.

Windows 10 installation disc

The recovery environment for the current system is included in its installation disc. Naturally, we are talking about the official installation Windows disk 10. Installation discs with "self-made" Windows assemblies can only be used for a clean installation of a new system and may not contain the functionality of restoring the current system. After booting from a USB flash drive or DVD with the Windows 10 distribution, we go through the welcome window.

Recovery disc

failure to Windows boot 10 is a case of using the above recovery disc. Boot from it and press any key to continue booting from the CD / DVD.

Choosing a keyboard layout

4. Windows Recovery

By any of the methods discussed above, we will get the action selection menu. In this menu, select the "Diagnostics" section, and in it - "Additional parameters".

The next step is "System Image Restore". This is the standard Windows 10 recovery tool from a backup.

The system is preparing for the recovery process.

Will start step by step wizard Windows recovery from a system image. The last created image will be selected by default. But if the system needs to be restored from an earlier image, you must manually specify the path to it. Click "Next".

Now we press "Finish".

We confirm the launch of the Windows recovery process and wait for its completion.

After successful completion, restart the computer.

All - Windows 10 will revert to the state it was in when the image was created. The system will have the same settings, the same installed programs, the same user files on the C drive.

Have a great day!

It's not a secret for anyone that from July 29, 2016, financial expenses for those wishing to upgrade to Windows 10 will amount to about 120 US dollars. But even today, users have a chance to reserve free upgrade and then after the 29th, get an update to Windows 10 without any cash costs.

What you need to know before backing up Windows 10?

Owners of legal versions of Windows"Sevens" and "Eights" have the opportunity to get a free backup of the OS upgrade to the "Tenth" version from Microsoft. But before proceeding with these actions, it is necessary to clarify the features of the new system in order to be sure whether it is worth installing the newest Axis. Microsoft claims that Windows 10 is equipped with only the best features, drawn from the experience of operating older operating systems.

And also with it, the user will receive the following new features:

1. tools for creating holograms;
2. the ability to control touches on the screen;
3. assistant controlled by voice commands;
4. handwriting text input;
5. etc.

equipment requirements

Redundancy is advisable if the PC has the following:

1. Windows 7 with SP1 or updated Windows 8.1;
2. Processor frequency not lower than 1 GHz;
3. RAM - 1 Gb (for 32-bit) and 2 Gb (for 64-bit);
4. Hard drive memory - 16 Gb (for 32-bit) and 20 GB (for 64-bit);
5. Video device - DirectX 9 or higher with WDDM 1.0 software "
6. Screen - 1024 x 600.

It is advisable to make a reservation if the following functionality requirements are met:

What will the user have to refuse?

Some of the features that users of older Microsoft operating systems are used to will disappear. Below is a list of some of them:

1. Windows 10 will uninstall Windows Media Center;
2. Installation of a third party will be required. software for the purpose of watching DVD;
3. Have Windows users 7 uninstalls all Windows 10 widgets, as well as the Minesweeper, Klondike and Hearts applications;
4. If your computer has a USB drive floppy disks, then its drivers will be removed.

How do I reserve an update?

When updating the OS to Windows with index 10, Microsoft provides this user's PC with a permanent free license. Thus, the owner of this computer will be able to upgrade their system to Windows 10 after 07/29/2016 without paying. Anyone who doesn't like the new axis can cheat. You can upgrade to the "Tens" with the subsequent rollback of the system to the native version of the OS.

Before booking an update, you must update the operating system already installed on your computer:

1. in case of Windows 7, Service Pack 1 is required;
2. in the case of Windows 8, a system upgrade to 8.1 is required.

When the installation of these upgrades is completed, a notification will automatically be sent with a proposal to upgrade to Windows 10. But sometimes it is missing and then you need to take the following steps:

Ready! As soon as Microsoft releases Windows 10, it will automatically install on your computer. The owner of the PC will receive a message about the possibility of its installation and he will only need to click on the "Confirm" button.

Can I cancel my reservation?

The operation of booking an upgrade to Windows 10 is very simple, if it turns out that the user does not like the new OS from Microsoft, then you will have to use a slightly more complex algorithm of actions, which is presented below:

1. Click on the "Windows" icon in the lower right corner of the taskbar;
2. In the window that appears, click on the "Three stripes" button, which is located at the top in the left part of the window;
3. Click on the "Cancel reservation".

Is the game worth the candle?

Do you really need to backup Windows 10? Many IT specialists also have this question, and not just ordinary users. Microsoft's main intention when launching this company with a "reserve" offer is to collect statistics for later analysis. There is information that after the release of the latest OS, it will be installed by at least one billion computer owners around the globe. And the vast majority of them are home PC users.

As you may have guessed from the title, in this article we will tell you how to cancel a Windows 10 reservation. There may be several reasons for such a desire, but the most common is unwillingness to upgrade to a version that has not yet reached the "first service pack" phase. Be that as it may, let's get started, good, canceling the save is quite simple ...

Cancellation

In order for the already reserved Windows version 10 never made it to your computer, follow a few simple steps to undo it:

1. Open the Windows backup utility (the icon with the "tens" logo next to the clock);
2. Click on the item "Check update status";
3. Click on the inscription "Cancel reservation".

Immediately I would like to draw your attention to several important points. First, if you decide to cancel a reservation and then redo it, this will not speed up the upgrade process in any way. Instead of finding out in search engines how long to wait for Windows 10 after saving, we recommend that you pay attention to Media app Creation Tool, about which we have already written many articles and shot several videos.

Secondly, after canceling the update, the system will still annoyingly remind you of the existence of more new version OS. Curiously, almost everyone knows how to back up Windows 10, but not everyone knows how to cancel and get rid of the annoying icon. Let's correct this misunderstanding.

Removing the reservation icon

So how do you make sure that the update reminder never appears on your screen again? The easiest way is to follow a small instruction:

1. Press Win + R to open run windows;
2. Enter: wusa.exe / uninstall / kb: 3035583

1. Click OK.

These actions will allow you to cancel the KB3035583 update package, which, in essence, is a reminder application. It remains only to wait until this update tries to install on your PC again and refuse to install it - by the way, you do not need to wait long.

Freeing up space

It remains to deal with the last question- how to remove the "lack of space" spell. The fact is that after the backup, the system starts loading setup files, which it needs in order for the update to occur without additional network operations. The total volume of this data can reach four gigabytes, which for some may seem insignificant, but for most users such a "load" seems quite burdensome.

So, in order for your hard drive to completely get rid of unnecessary ballast, we do the following:

1. Press Win + R to open a progress dialog;
2. Enter cleanmgr and click OK;
3. Wait for the disk cleaner to load;

1. Click on the "Clean up system files" button at the bottom of the window;
2. Check the "Temporary Windows installation files" item in the list;

1. Click OK.

After a while, your hard drive will add free space, since any references and data required to install Windows 10 will be permanently removed from it. It is not difficult to wait for the cleaning to complete, as there will always be a progress indicator on the screen.

Instead of a conclusion

So we figured out how to cancel a Windows reservation, but, in fact, the relevance of this article is decreasing every day - today there is no longer a need to reserve the top ten and wait until it becomes available. The operating system came out in the summer and has long been available for immediate download, which can be done by downloading the Media Creation Tool application.

As for the main question: to update or not to update, here it is worth focusing only on your own opinion. If you are interested in the opinion of the author of this article, then he switched to top 10 in the fall of 2014 - when the first insider version became available ... and he had no desire to cancel the installation!