Computers Windows Internet

Connecting laptop to sata drive. Convenient adapters for quickly connecting an external drive. Internal hard drives

How to connect a hard drive via USB

Sometimes, in order to repair and restore a hard drive or to transfer information from it to another device, it becomes necessary to connect a hard drive from one computer to another. However, this is not always possible. We propose to consider the most common situations and ways to solve them.

So here's the new redesigned "How to Obey a Blog on Your Hard Drive". First, as before, we will need to remove the damaged disk from whatever the machine is holding it hostage ever. If it is a tower, then the original "How to Subdue Hard Drive Recording" will work perfectly to pull the disc out. If it is a laptop, refer to the "How to subjugate a laptop on a hard drive" section.

Step-by-step connection of HDD to computer

There will now be some way to open the box depending on which brand you bought. One part is the case and the other is what we need to connect HDD... Make sure when purchasing a case that is supported by your drive, or that you are getting the adapter you need to get it to work.

A hard drive from one PC is completely compatible with another PC.

To connect it, you need to remove it and connect it wherever we need it. The problem is not obvious. But! Many users do not know what their illiterate actions can lead to.

To remove the HDD from system unit The PC or laptop must be DEPRESSED. No devices other than USB and memory cards (MemoryStick, SD, MicroSD and others) can be disconnected from the computer without disconnecting it from the power supply. You can read more about security rules in this article. Read how to properly disconnect the PC from the power supply.

Below is a picture of my adapter. This is the side that connects to the case. When you're done, it should look something like this. The mesh cover chassis is awesome, excellent for airflow!

  • Make sure it has a good sized fan.
  • It must be made of aluminum.
Buying one with its own external power is a good idea because then you don't depend on a port to power the drive.

How to see a new external or internal hard drive in Windows

Great answer: put it in an outer case hard disk and keep using it! External enclosures are also ideal if you want to opt for a high-quality hard drive mechanism rather than risking what might be hidden inside a fully assembled external storage.

After powering off your PC or laptop (it is also necessary to remove the battery from the laptop), you can proceed to disassembly. Remove the side cover of the system unit (or the bottom cover of the laptop), carefully disconnect the cables, while remembering their location. After that, unscrew the screws securing the hard drive in the case and remove it. Connect the hard drive to another PC in the reverse order, after disconnecting it from the power supply.

Fast primer for internal hard drives

Hard drives are not all created equal, and they are not built to last forever: good disks usually lasts about three years of very active use, and large - for five years. The use of light expands their lives. Because if you are thinking of buying a fully assembled external drive, you may not know who is creating the drive mechanism inside, which can be risky.

Understanding external enclosures

Just remember, statistics show that cheaper is not necessarily better here. When you buy, you are actually buying two things: an internal hard drive like the one shown above and an external case. To keep costs down, the cheapest outer cases often cut corners using chips, cables, and bare-bone materials.

Remember: manipulations with the internal devices of a computer while simultaneously supplying an electric current can lead to the most dire consequences: a power surge and, as a result, failure of the HDD or PC as a whole, or even an electric shock to the would-be master. Be careful not to endanger yourself and your computer!

Installing a hard drive into an adapter

As you can see above, it is slightly smaller than gorgeous, and its blue indicator The data is off at the back, rather than glowing through the mesh front. Light only spreads when it is connected to a computer and in use. Full assembly takes about 15 minutes, one type 0 or sharp Phillips type 1 screwdriver and zero experience. First, four small screws are removed from the bottom of the case, allowing you to slide the hard drive tray out of its center. You turn the tray over, attach four slightly larger screws to the tray and hard drive, then slide the tray back into the chassis.

One PC's hard drive doesn't fit in another

There's a catch, isn't it? The fact is that modern operating systems practically block the user's access to the HDD. Rather, you can write, erase, read information in full. But, for example, it is not always possible to format a hard disk. However, this is often simply necessary. For example, when trying to install another operating system... This problem is especially acute with laptops, since they cannot be connected to a PC due to different hardware configurations, and two hard drives cannot be connected to another laptop.

After replacing the four bottom screws, you will apply four matte transparent rubber feet to them. If your old hard drive will only be needed temporarily, you can use the docking station instead. external hard disk. There are no screws here; It's totally plug and play.

You can choose the solution that best suits your personal needs. Read more of mine! It will only be used on the first computer connected to it, and the other computer will be ignored. However, if you configured the first computer as a server, you can access the same drive from multiple computers. In the section "Sharing" on the Internet and wireless line. ... Two computers can use the disk, but not at the same time. You will have to "pop" the disk from one computer's desktop and then physically disconnect it before you can use it on the next computer.

  • method one:


There is one clever way to solve this problem. If you are the proud owner of an external hard drive in a collapsible case, then you have the opportunity to replace the hard drive in it. This requires that specifications Your HDD was matched with the disk in the "box". If the disk size, operating voltage and connection type match, then remove the hard disk from the PC as described in the first case. Then open the case of the external drive, disconnect all cables from it, remove it. In its place, insert your hard drive from the PC, close the "box". It's that simple! Now you can connect your hard drive to any computer via the USB port like a regular removable drive.

Time Machine can keep backups for both computers on disk, but can only run one machine at a time. Yes, two machines can share a drive, but a drive can only be connected to one machine. To share a disk, you have to attach the disk to one machine and share the disk. A second computer can access the drive over the network.

Real life application

All three answers are wrong, there is a way to use this with multiple computers on one, it can take time and patience. In the end, the result will be worth it. This will activate network drive and can share the maximum number of computers the router can support at once.

But what if the hard drive from your PC or laptop does not fit another computer or there is no way to "make" a removable drive out of it? Not everything is so sad! There is an exit.

  • method two:

In one store that sells frankly Chinese electronics and computer equipment, I managed to buy an HDD / USB adapter that allows you to connect a hard drive via USB. Honestly, I myself did not know that such things happen. Consists this device in three parts:

Connecting a different type of disk

Be sure to update your drive to latest version firmware. You will be able to update the firmware without formatting the device. Visit the manufacturer's website for information on updating the drive's firmware. The above devices have been field tested. However, please note that we do not guarantee the operation of these devices.

Backups are a lot like insurance: you must have it, and you hope you never have to use it. Likewise, if you need to use a backup hard drive to restore your data, it can save you time, money, and headaches. We often remind you how important it is to back up your files, but it's not just about backing up. The media you use to store your data is critical!

  • the device itself, which is a body the size of a cigarette pack
  • USB cable firmly attached to the adapter body. The cable has two USB plugs, I'll explain why
  • power supply unit for output voltage 5/12 V.


Internal hard drives

You have many choices, but each of these devices works best in specific situations. So how can you determine which type of hard drive is best for you? Choosing a hard drive for Reserve copy your data can become a quest in itself.

There are all kinds of external hard drives, from a number of brands. You are using an external hard drive for backups with applications such as or, but you cannot use the same drive for both. Therefore, if you need belt protection and suspenders, it is recommended that you create one disc for each. Also, check how much data you need to back up and buy a drive that has at least double the storage capacity.

Immediately, I note that this adapter is universal and makes it possible to connect via USB hard drives any existing SATA 2.5 / 3.5 / 5.25, IDE 2.5 / 3.5 / 5.25 standard.

USEFUL:

Now let's talk about the connection method:

  • for SATA drives everything is simple: insert the appropriate adapter connector into the hard drive socket, connect the adapter to the computer using the black USB cable and turn on the adapter with the switch at the end of the case. From now on, you can work with your SATA HDD as with a regular external drive or as a USB flash drive;
  • for IDE 2.5 drives everything is the same, only you need to additionally connect a red USB cable to the computer. It will provide power to your HDD;
  • for disks from PCs of the old IDE 3.5 format and the very ancient IDE 5.25 instead of the red USB cable, you need to connect the power supply to the adapter and insert it into the network. Let me remind you that all the manipulations for connecting the disks must be carried out BEFORE the current is applied, that is, first connect everything, then plug it into the outlet, and then turn on the power button on the adapter case. Disconnect in reverse order.

ON A NOTE:

I've had discs crashing on me, but not for many years. All drives mentioned in this article are enclosures, meaning they are contained in a device that has the connectors you need to use them. However, there is another solution: you can use the docking station to store the internal hard drive.

The advantage is simple: internal hard drives slightly cheaper than in housings. You can of course leave two drives in the dock, but it is more efficient to use external drives if you want to always make backups. A hard drive dock is a great device if you want to use multiple backup drives for off-site storage. There is another reason to own a docking station. If one of your external drives is “not working,” you can remove the drive and access it in the dock.

A very useful thing, more than once it helped me out at home and when working with clients, when I was engaged in private repair and adjustment of computers. This device cost me in 2014 700 rubles at a dollar exchange rate of 35 rubles per dollar, that is, $ 20. It's in a retail store in a small county town. I think that a similar contraption can be found in online stores much cheaper, and at the Chinese themselves at online auctions - generally for a penny. Please write in the comments about prices, other similar devices and your experience of using these devices.

This docking station can handle both standard 5 "drives and smaller 5" drives, and can even copy one drive to another without the need for a computer. It keeps your mess free and the device can be located anywhere in your home or office, next to a router or hub. And you can use it to store other files that you might want to share with your co-workers or family.

This is most likely the case if you have a laptop. Plus, the fact that you don't need a power source - they get their power from your computer - makes them easy to use. They're usually not as fast as a good desktop computer, but you don't need much speed for backups.

The need to connect a hard drive to a laptop may arise when it is necessary to increase the amount of space for storing personal data, when an old hard drive has failed and a new one needs to be installed in its place, or when you need to copy a large amount of information to a laptop. In this case, the connection can be made in several ways.

How to place a small mobile HDD in the system unit

With portable drives, your longevity is your best friend, and keeping your data safe from water, dust and drops is critical. You shouldn't use any old hard drive you put in yours. backups instead, you want to make sure that if you need to recover some of your files, you have no problem. Ultimately, hard drives do not work, and hard drives for more than a few years increase the risk of data loss. Therefore, if you have old hard drives, you should consider replacing them.

The procedure for replacing an old hard drive with a new one

If the old HDD on the laptop is irrevocably "covered", then the only way out of this situation is to install a new drive. It can be purchased at any computer store. When buying a hard drive, you need to know that its usual size is not 3.5 ", as for stationary PCs, but 2.5".

Also, don't buy just one backup hard drive. If you really care about your data, you should maintain it at least twice. Having a second disc isn't too expensive these days, and it adds. Because, like insurance, if and when you need it, you will never regret it.

The procedure for replacing an old hard drive with a new one

Mobile storage is limited and expensive, so if you need additional storage, you're better off using an external hard drive. But external hard drives are so awkward with all their cables and connections - or are they? Not if you are using a wireless hard drive.

Before connecting the hard disk to the laptop, you should also pay attention to the HDD interface available on the PC. Almost all modern laptop computers are equipped with SATA hard drives. Older models may have an IDE (PATA) interface. In the first case, the data transfer rate reaches 600 Mb / s (SATA 3.0), although a new standard (SATA 4.0) with a connection speed of 12 Gb / s is planned to be released soon. The IDE connector allows data transfer at a speed of up to 133 Mb / s. To find out which interface your laptop supports, you need to take out an old hard drive and look at its connector.

Wireless hard drives have been around for a few years now, so it’s easier to learn about the common problems you’ll face and what is worth buying a good hard drive. Of course, the goal is on-the-go storage, but you also need to keep a few other things in mind.

What is a Wireless Hard Drive?

Simply put, a wireless hard drive is what it sounds like: the wireless version you've probably seen by now. A wireless hard drive is no different from a 5-inch portable hard drive. Naturally, it's a little cumbersome and heavier as it has a wireless unit and a backup battery, but otherwise it's pretty much the same.

The procedure for replacing an old HDD with a new one will be as follows:



Connecting a second hard drive

There are several ways to install a second hard drive on a laptop:

  • via DVD connector;
  • using special adapters (external hard drive).

If you rarely use a DVD drive on a laptop, then you can install a second hard drive instead. This requires:



If everything is done correctly, then after turning on the laptop in the "My Computer" window will appear new disc... It may need to be formatted before use.

If you have no desire to get rid of DVD drive, then you can connect an external HDD via USB port using a set of adapters. They may look different, but they perform the same functions.

There are three types of adapters:

  • from IDE to USB;
  • from SATA to USB;
  • combined.

The choice of this or that option depends on the interface that has external drive... A common adapter kit also includes a power supply, as the USB output may not always deliver the required voltage.

The procedure for connecting an external hard drive to a laptop is shown in the image.

There are also special adapters that make the procedure much easier. HDD connection to the laptop. As an example, we can consider an adapter between USB and SATA / IDE from Sabrent, which is equipped with all the necessary connectors and does not need additional source nutrition. Its cost is about $ 15.