Sees iphone in dfu. What is DFU mode on iPhone and how to enable it. How to get iPhone out of DFU mode

DFU (Device Firmware Upgrade) mode differs from the usual recovery mode in that it bypasses the operating system and flashes it directly. As a result of flashing in DFU mode, you will receive an installed fresh version of iOS on your iDevice.

This is the surest method to reflash and can be recommended to anyone who has errors in iTunes during normal recovery. Often such errors occur on those iPads that have been jailbroken, but the user still wants to reflash the iPad (traces of the jailbreak, in this case, as with a normal recovery, will disappear).

Flashing via DFU mode is possible on iPad, iPhone and iPod Touch of any model. Below I will write about the iPad, but on the iPhone and iPod Touch everything is done in the same way. Before flashing in DFU mode, I recommend putting the device on charge for at least 15-20 minutes, just in case. So that during flashing it does not happen that the device turns off due to an uncharged battery.

How to enter DFU mode on iPad(DFU Mode iPad)

1. Close iTunes on your computer.

2. Connect your iPad to your computer.

3. Turn off the iPad completely by long holding the Power button and sliding the "Turn off" slider

4. Hold down the Home and Power buttons exactly 10 seconds.

5. Release the Power button, but keep holding Home until the computer displays a new USB device (approximately 10-15 seconds). This may not happen - in this case, hold the Home button for 20-30 seconds just in case.

6. iPad screen in DFU Mode will be black don't wait for it to turn on.

8. Now there are two options:

a) To flash, hold down the Shift button (in OS X - “option”) and click on Restore iPad/iPod/iPhone (Restore). In the file selection window, specify the firmware file you want to use (it must be downloaded before, of course). The current firmware file can be downloaded from here.

b) You can simply click the "Restore iPad" button. In this case, iTunes will simply tell you:

And after pressing the “Restore and Update” button, it will download the latest firmware and start restoring it.

Option A is preferable to B, since you will have firmware on your computer in case of any errors. In option B, the firmware will be re-downloaded each time.

That's it - iPad firmware in DFU mode has begun. In option B, it will start when iTunes downloads the firmware (depending on the speed of your Internet connection). You can track the download progress in the upper right corner of iTunes - there is a button that opens a submenu with downloads.

An apple will appear on the screen of the iOS device, the device will reboot several times, and as a result, after 10 minutes you will see the welcome window of the iOS operating system. You can proceed to system settings.

Popular questions and answers on the topic “flashing iPad in DFU mode”:

Question: Which flashing method is better?

Question: How to get iPad out of DFU mode?

Answer: hold down the Home and Power buttons and hold them until the iPad shows signs of life. But it happens that the device does not want to exit DFU mode. In this case, one thing remains - to flash through DFU according to the instructions above. In this case, you will get a full-fledged working device on a fresh firmware.

Question: What to do if DFU mode does not turn on?

Answer: As I wrote above, DFU mode does not give itself away on the screen. That is, if the screen is black, and iTunes sees the device and wants to restore it, it means that you have already enabled DFU mode.

Question: Is it possible to put an iPad into DFU mode without working buttons (for example, the Home button is broken)?

Answer: No, DFU mode will not be available. Repair the buttons in the service, and then restore. In any case, DFU is an extreme case. Most likely, you will be able to carry out a flashing through the usual recovery in iTunes.

If you have any questions or problems, feel free to write them in the comments.

The physical Home button has been replaced with a touch button with next-generation Taptic Engine technology.

The Taptic Engine now performs a device feedback (in the form of vibration) depending on the actions you perform and how you press the button. Because of this, the method used to put your iPhone 7 or iPhone 7 Plus into DFU Mode and Recovery Mode is now different from previous models.

In this guide, we will show you how to enter DFU mode and recovery mode on the new flagship iPhone models.

Putting iPhone 7 or iPhone 7 Plus into DFU Mode

Step 1: Make sure you have the latest version iTunes.

Step 2: Connect your iPhone 7 or iPhone 7 Plus to your computer with a USB lightning cable.

Step 3: Then turn off iPhone.

Step 4: Now press and hold the button Locks on the right side of your iPhone within 3 seconds.

Step 5: At the same time, press and hold the button volume down on the left side of your iPhone while still holding the lock button. Hold both buttons for 10 Seconds.

Step 6: If the Apple logo appears on the screen, then you have to start over because you held the buttons for too long. Otherwise, follow the instructions below.

Step 7: Then release the button blocking, but keep holding the button volume down yet within 5 seconds. If the message “Connect to iTunes” appears, then you have been holding for too long - start all over again.

Step 8: If the screen remains black, it means that you have successfully entered DFU mode!

Congratulations! iTunes should show a message that it has detected your iPhone 7 or iPhone 7 Plus in DFU mode.

Putting iPhone 7 or iPhone 7 Plus into Recovery Mode

Turn off the iPhone 7 as usual by holding the side button
We are waiting for a while, for a complete shutdown
We hold down the button Volume down
Then press and hold Side button while holding the volume button.
Hold until you see the recovery screen and the iTunes icon.

If the iTunes icon appears, it means that the iPhone has entered recovery mode. Now you can open iTunes.

Although the new method requires a little more effort than on older iPhone models, it is still a matter of time and you will quickly get used to it. Write in the comments if you already had to transfer the device to DFU or Recovery Mode?

Most users of Apple phones - Iphone 5, are well aware that sometimes unforeseen situations occur, files disappear, or you delete them yourself, and then you realize that you need them very urgently. Or there is another situation, for example, you installed the wrong firmware for your phone, and it just stopped working. What to do in such an unforeseen situation? Should I rush to the nearest service center? For starters, you should not worry, because there are several ways to restore your files or a new firmware for your phone. There is a phone mode Iphone 5 - DFU. This is the mode in which the phone is not active. But entering this mode, the phone makes it possible to restore lost or deleted files, or reinstall the phone's firmware.

How to put iPhone 5 into DFU mode:

You need to connect the USB cable and completely turn off the device or phone.
Next, you should simultaneously press two buttons ("Home" and "Enable" / "Off") and hold them together for 10 seconds.
After that, exactly at 11 seconds, release the "On" / "Off" button and continue to hold the "Home" button for another 10 seconds.
Nothing should appear on the screen of your Iphone 5. But if you have a splash screen (apple), then you should try again.
Since the phone is connected to the computer, iTunes should display a message like this: “iTunes has detected an Iphone 5 in recovery mode. To use this Iphone 5 with iTunes, you need to restore the settings of the player."

How to get iPhone 5 out of DFU mode:

should not be displayed on the screen.
Press both buttons at the same time and hold for 10 seconds.
Turn on iPhone 5.

If you've had any problems with the software on your iPad, or if you've ever needed to erase all information from your device, you know what updating and restoring is.

In the same case, if suddenly you have not encountered either one or the other, and also do not know what DFU mode is (iPad or iPhone - there is no difference), this article will be useful to you. In it, we will look at how to work with this mode, what it is. Do not be afraid of terminology and, at first glance, complex abbreviations - everything is very easy and simple. A person who has minimal experience with a computer and tablet can handle it.

General view

To begin with, let's clarify what this very DFU mode is. The iPad, as you know, runs on the iOS operating system. When you work with it, you are using a touch-responsive one. This is exactly how the device control procedure is carried out - the graphical interface receives commands sent by the user, after which the OS processes them and responds properly.

If you have such knowledge, you will not need to contact the service center with a request to fix a software error. This can be done even at home. This, obviously, was Apple's goal - to make a product so simple and convenient that even a layman at home could fix a system problem in it. As you can see, they succeeded.