Xiaomi led strip how to connect. Xiaomi Yeelight Lightstrips smart RGB strip. Convenient control panel
Flexible and practical
RGB LEDs
Adhesive tape
Easy to use
Convenient control panel
Backlight technologies
smart House
Additional functions
main parameters
">Xiaomi Yeelight LED Light Strips
Outdoor lighting for a magical effect
Safe and reliable material
The LED strip is made of mercury-free, soft, colloidal polyurethane-based material, which is a new generation high-tech and high-grade product. Yeelight tape features high transparency, high light transmittance and
anti oxidant properties.
Flexible and practical
Flexible LED strip, can be easily bent and stacked at any angle, thus ensuring maximum practicality for the user.
RGB LEDs
V led strip Xiaomi has built-in high quality RGB LEDs with wide color gamut. 16 million colors give a bright glow and provide a full range of colors for your imagination.
Adhesive tape
The adhesive layer is applied across the entire width of the product for easy attachment, so the LED strip can be quickly and easily glued to any surface. The adhesive holds the tape securely and allows you to reposition the device as needed.
Exclusive lighting atmosphere
Anything your imagination desires!
The LED backlight is equipped with DIY intelligent high-performance high-quality lighting system. The system automatically changes the tone of the backlight to create the most favorable light shade for comfortable lighting in your home. You can set the color switching by choosing any shade of light: from blue to warm yellow, which is considered the most appropriate for creating a cozy atmosphere, for example, at home.
The unique material from which the LED flexible strip is made allows it to be bent at any angle, which makes it possible to use it in any interior design. To select the most comfortable light shade and light intensity, use the switch to select one of the preset modes (the switch allows you to switch between different modes by pressing one button on the basis of "forward / backward"). Choose the light tone that harmoniously fits into the home atmosphere and interior, and the light rays, increasing the illumination of the room, visually expand the space and create coziness.
Easy to use
LED clear strip is a product focused on ease of use. The flexibility of the tape allows it to be freely positioned almost anywhere. The product is easy to install and use: it integrates seamlessly into your daily life and takes its place in it. You can get rid of excess wire that will not be noticeable in the interior, and only when using it, you will remember about its presence.
The adhesive layer is designed for easy installation. There are no restrictions when choosing a place to create a unique atmosphere: it can be footpaths, walls, ceilings, appliances, furniture, interior items. A simple way to change the visual perception of the space at home and your mood with a rich variety of colors that change any interior, making it special. Just choose the right place for the correct distribution of the luminous flux.
Convenient control panel
Customize your home lighting and create a unique ambiance. At the touch of a button, you can choose any tone from a huge variety of color palettes. Just press a button to switch colors! Create a rainbow over your child's bed! Eye-friendly, natural lighting. The light spectrum has a natural tint, allowing you to choose a beautiful backlight tone from a rich color palette.
Backlight technologies
Lighting can match the beat of your favorite music track! The dynamic Ambilight technology will react to your music and turn on the lights in conjunction with the rhythm of the music. You can set a special APP application for your smart phone to sync with the light strip. The smart system will "animate" the tape and turn on the LEDs in accordance with the rhythm of the music track.
Synchronization with other devices
By ensuring the synchronization of all devices included in the system "smart House», You will remain in the center of the events of interest. The Yeelight LED strip supports the smart home system with a dedicated application for mobile devices. With this application, you can select and set the color, intensity and time of illumination to create high-quality lighting in any room. Express mode for switching the color palette allows you to create a three-dimensional lighting effect.
Additional functions
main parameters
You can choose about 16 million colors on the LED strip: combinations of red, green and blue. This effect is achieved using LED color mixing. You can buy Ambilight LED strip in one click in the Rumikom store.
Today, the expression “smart home” is not surprising to most people. How can an ordinary house become smart? Smart home ecosystems are gradually becoming commonplace, helping users to have more free time. The smart home industry gives electronics manufacturers a wide range of activities. Thus, even the branded Xiaomi MiJia Yeelight Ambilight RGB LED strip was produced.
The name of the LED strip got so long due to the fact that the manufacturer is not only Xiaomi, but mostly the MiJia sub-brand, which has long been under the patronage of the company. A simple LED strip cannot be called a gadget. This is because it can be controlled from the proprietary Mi Home application, has various protection against external influences and is durable. Perhaps now it is worth considering in detail.
The device will be delivered to customers in a standard box of the MiJia brand. It is made of white thick matte cardboard. The front part shows the rays of light emanating from the LEDs. In general, everyone can understand this picture in their own way. On the ends, the manufacturer duplicates the company's logo. On the back there are several stickers with technical and legal information about the manufacturer and the product. You can study the packaging in more detail in our blog, where we studied Xiaomi MiJia Yeelight Ambilight RGB one of the first. Each item is placed in specially designated trays. The package of the device includes: instructions and a warranty card, packed in a special sealed bag, and the tape itself.
The appearance of the tape does not differ in any way from competitors' devices, but the device significantly surpasses them both in reliability and in technical equipment. The difference is that the tape has a remote control that is daisy-chained between the power adapter and the LEDs. The standard tape length is 2 meters, which is enough for an average room.
The remote control is one of the main components of the device. It is made in the corporate design of the company: from white matte plastic High Quality... There is one button on the front of the remote control - on / off. And inside is the main module that makes the device smart - Bluetooth 4.1 LE and a Wi Fi module. There is technical and legal information on the back of the console.
It should be noted separately that Charger only comes with a European plug. But this is not a big problem, adapters are sold in every store, and are quite inexpensive.
As indicated by the manufacturer, the tape is capable of working for about 3 years of continuous glow. This is a very good indicator of an average cost gadget. The material from which the brush is made is hypoallergenic. There are special clamps on the wires of the device - wire clamps, which facilitate quick installation of the tape.
Pay attention to control with mobile device... It is carried out in a special block Xiaomi apps Mi Home, designed for smart home devices. When connecting the device, the Bluetooth and Wi Fi protocols are used. Everything happens in a familiar way: first, the signal from the phone goes to the MiCloud cloud, from where the signal goes to the device, which is capable of reproducing 16 million different shades. This function will definitely help the user manage the ribbon and expand its functionality.
- Lighting control with an IOS or Android smartphone
- Bluetooth connection
- 16 million colors with brightness control
- Length: 2 meters
- Number of diodes: 60pcs
- Music Mode: Yes
Good day to all. To begin with, I will say that the idea of connecting an RGB LED Controller for a tape with a smart remote is far from new and was born to me a long time ago. But in this publication I would like to focus on the simplicity of the idea and the cheapness of its implementation. As usual, I suggest you watch a video from my channel about translating this small idea into reality, and only then go to the text part of the review, there is a lot of things that I did not say in the video. Despite the fact that the video turned out to be relatively short, for your convenience I wrote a navigation on it.
0:00 - 3:43 - Unpacking controllers and theory
3:44 - 6:15 - Connecting and reworking connectors
6:16 - 6:45 - Checking work
6:46 - 8:57 - LED strip binding on Xiaomi Remote 360
8:58 - 9:32 - Conclusion and demo
Controller for RGB LED strip -
I bought the controllers on AliExpress for each, I bought the Xiaomi Remote 360 smart remote control there for a very long time - its cost is approximately.
Considering that such controllers can be bought for any LED strip and programmed to work with Xiaomi Remote 360, while the IR channels in colors will not conflict very often, it is quite easy to give priority to such a solution compared to the Xiaomi Yeelight smart LED strip. Of course, it has its own plug-in and the variation in color solutions is presented in a larger volume, but its cost and length still put my simple solution in priority.
Xiaomi Yeelight smart LED strip - or
When choosing a controller for the LED strip, I immediately decided to discard all controllers that have their own software and work via Bluetooth or Wi-Fi, since in this case we are interested in work within the Xiaomi smart home ecosystem.
I had a Wi-Fi controller that used to be on this LED strip. It was either in conflict with my router, or out of the box it was crooked and responded to the touch panel signals for a very long time, and in most cases did not react at all, caught incomprehensible Wi-Fi and turned on on its own. On the Internet, I did not find anything about his programming and solving this problem, after which I parted with him, just after that the idea came to my mind to implement this kind of integration.
Now let's go directly to the controller itself. It is a small board with chips, through which color mixing is carried out according to the RGB Curves type. The board has an output IR signal receiver, a soldered power connector, wiring for three color channels and a plus. All this is collected in a small white deshman plastic case... I'm not going to delve into the features of the board, simply because I do not have special knowledge in microcircuits and I will not be clever, in the end we are only interested in the work of this controller within the framework of the Xiaomi smart home system, and not its insides.
When connecting the controller to the tape, there were small problems in that, unfortunately, I did not look at the connection connectors when buying and they turned out to be the same, so I had to quickly change the connector on the controller to the “daddy” one, the old controller itself was the donor. It was possible, of course, to twist the wires in a straight line, but I needed the controller, in case of anything, to be able to move mobile and control another tape. To strip thin contacts, it is better to use a special stripper, or whether to do as I suggested and did in the video.
Wire stripper -
Also in everyday life, when working with thin wiring of LED strips, it is better to have heat-shrink tubes, which I also did not have.
Heat shrink tubing for wiring insulation -
The remotes of this kind of controllers are almost all the same, the difference is the presence of keys or buttons that allow you to make a choice of one color or another, as well as turn on color variation programs. In my case, this is a 44-key remote control, most of which are programmed. At the same time, since the controllers are quite cheap, it is possible to repeat IR signals on different keys of different controllers. That is, for example, an IR signal from the remote control of one controller, which is responsible for turning on the red color, can turn on the color transfer mode on the other controller and vice versa. They can also conflict with the TV remote control.
I connected the second controller to the LED strip, which illuminates the frames of the TV. Since there was no donor connector for the “daddy,” I didn’t have to twist the wires straight.
The LED strip on the TV migrated from the table, as many LEDs were out of order and did not adequately respond to controller commands. Retouching the TV frames solved this problem and the backlight looks quite suitable in this arrangement. In the future, I plan to replace it with the remains of the LED strip located now on the table.
Now we connect the LED strip controller with Xiaomi Remote 360.In the future, this bundle will allow not only to remotely control the LED strip from a smartphone, but also to set scenarios using.
For a combination of a controller and a smart remote control Xiaomi Remote 360 go to mi home application - add devises - remote control plugin.
Then, from the bottom, select the very first icon with two remotes superimposed on each other - this is a simple remote control binding mode, in which each button on the remote control must be programmed separately.
Click on the image of the very first remote control ➜ press plus ➜ enter the name of the button press further.
then a picture will appear indicating the need to press a programmable button on the remote control, repeat the operation and program all the necessary colors ➜ then press the button in the upper right corner, confirming the creation of a new remote control and buttons that we have programmed.
Of the minuses, we can note the absence of animation for pressing a button - a kind of animated toggle switch, if available, which could be understood which device is working and which is not, turning it on remotely and not being able to visually observe it.
In general, these are the nuances with highlighting various objects with LED tape in my room. From myself, I can say that I like experimenting with such solutions. I definitely recommend controllers and LED strips for similar and similar solutions. Well, now I propose to look at a number of photos and evaluate the resulting aesthetics.
Thanks for watching, do not forget to subscribe to and comment on videos, there will be a lot of new and interesting content.
It is easier to indicate in which places the tape is not used - only where you do not want the presence of the highlight. Because a universal product can be marked in almost any area of the room: by the bed, near the desk, in the kitchen, along the steps, on interior items. And also bend as much as possible, if necessary. The atmosphere of the room will sparkle with new colors in the literal sense of the word thanks to a special decor item. You can customize it in your own way, like all Xiaomi smart gadgets.
Technical elements
Made of innovative plastic material based on soft safe polyurethane, does not contain mercury, has antioxidant properties.
The adhesive layer reliably holds the LED backlight in place, leaves no traces, and allows you to change the location. Convenient, easy-to-use control panel. The device is equipped with RGB LEDs that can give any color of light. 
Color selection
Millions of colors - in the case of Xiaomi Mijia Yeelight LED, this is not a figuratively abstract expression, but concretely real. 16 million colors and shades available. It is easy to change color with the remote control with one long press. But you will get more variations of customization of functions "for yourself" by connecting the device to the phone using Wi-Fi.
Smartphone control
To regulate the behavior of a "smart" novelty, you need to install a special YeelightAPP application. Then a number of attractive and useful functions will be available to you: 1. Alarm clock. The new invention is able to turn on and off in certain time by days of the week. 2. Various "games" with color: changing the hue, brightness of lighting, adjusting the color temperature - from cold white to warm orange. 3. Settings that provide for self-switching colors. 4. One-touch selection of ready-made preset glow options. 5. With the help of a video camera, you can create a shade identical to the color of the interior item on which the tape is located. Convenient idea in order to quickly get desired color.
There is another unique customization option. With Ambilight technology, color changes to the beat of your favorite music.
valendar wrote on February 7, 2017Original Xiaomi Yeelight Smart Light Strip
Product provided for review
PRICE - 30.99
LINK TO THE PRODUCT
✔ FEATURES
Name: Yeelight lightstrip colorModel: YLDD01YL
Type of: LED Strip Light
Belt length: 2 m
Wireless connection: Wi-Fi IEEE 802.11 b / g / n 2.4 GHz
Color options: Adjustable, 16,000,000 colors
Brightness: 1% -100%
Power: 12 watts
Power Supply: 100-240V ~ 50 / 60Hz 0.2A
Output voltage: 12V 1A
Average service life (h.): 25000
Compatibility: Android 4.4 and above, iOS 7.0 and above
Packing dimensions: 171 x 171 x 47 mm
Weight: 400 g
✔ PACKAGING AND APPEARANCE
In a pimpled sack there was an ordinary cardboard box.Inside, the already familiar white cardboard box, in a minimalist design.
On the back, as on all Xiaomi products, the specifications and information are in Chinese.
Under the cover is an instruction manual, which is generally useless as it is entirely in Chinese.
Oink oink.
The controller and power supply are located at the bottom of the box in their compartments.
In the tape itself, there is nothing remarkable, an ordinary LED tape, of which in the vastness of Ali.
The tape contains 60 RGB LEDs of 0.2 W each, filled with transparent silicone. Thanks to this silicone protection, the LED strip can be used, for example, in the bathroom. The manufacturer claims IP-65.
On the back of the flexible LED strip, Xiaomi placed 3M adhesive tape, for attaching the strip to almost any surface.
The end of the two-meter tape is sealed in a plastic cap.
1.5 meters of wire goes from the control unit to the tape.
Thanks to the presence of a button on the control unit, you can turn on or off the tape without a smartphone, as well as change the glow color of the LED tape.
Power supply unit with characteristic Xiaomi chinese with a fork. Outputs 12V and 1A.
The total length of the LED strip is 2 meters, the cable from the power supply to the remote control is 1.5 meters, from the remote control to the LED strip is 1.5 meters.
The thickness is 3.4 mm.
Power consumption in off mode is 0.6 W.
Different colors mean different power consumption.
Blue - 5.8W.
Red - 6.2W.
The maximum came out on green - 8.1W.
At a distance of about 50 centimeters in green light - 110 lux.
If you bring it closer, the maximum produced 3900 lux, but this is right above the sensor.
50 centimeters above the sensor in violet light - 80 lux.
And 15 centimeters from the sensor in bright white light - 518 lux.
Various shapes can be created.
More than 16 million colors are declared, but I will highlight the main ones in GIF
✔ software
Initially, the MiHome application downloads a plugin for managing the feed in Chinese, but you can change the apk and the application will be in Russian.The main screen for working with an LED lamp is to control the brightness and color temperature of the white color.
In color selection mode, you can select one of 16 million colors and set its brightness.
You can choose from preset color schemes or create to your liking.
In addition, you can set the color and brightness using the smartphone camera or even thanks to the microphone in the smartphone, the lamp will pulsate or change colors depending on the surrounding sounds.
In the off state, the LED strips are the heavenly bodies on the smartphone screen.
In addition, you can set various timers for turning on or off the LED strip.
Or set a countdown timer when the lights are off.
The firmware, as in most Xiaomi products, is updated quite often and in one click.
In addition, there are no more special settings, if you do not take into account various scenarios for automating smart home systems.
✔ VIDEO REVIEW
Subscribe on the channel - video reviews always faster than texting!
Bugs in Singularity?
Just Cause 2 crashes
Terraria won't start, what should I do?