Installing the tricolor ci module in the TV. How to find and tune satellite channels on a Samsung TV. Unable to watch scrambled channels. What to do

So, as I wrote earlier, the classic way to connect satellite TV is as follows:

Satellite dish - satellite receiver - TV.

Benefits of using a satellite receiver:

For this method, you can use any TV, it doesn’t matter if you bought it a year ago or 10 years have passed, the main thing is to choose a cable to connect the satellite receiver and TV;

A satellite receiver can act not only as a satellite signal receiver, but also have other functions, for example: Internet access, Smart TV, DLNA, etc.

Cons of using a satellite receiver:

Inconvenience when using two remote controls (from the TV and from the satellite receiver). Although modern TVs use various technologies to connect all devices and use only the TV remote control (for example, Samsung-e's anynet + technology), such technologies do not fit all equipment and do not always work perfectly.

Connecting satellite TV using the CAM module.

Another way to connect satellite TV is to use the CAM module. CAM module(Conditional Access Module, conditional access module) - an electronic device used as an adapter of a specific coding system to common conditional access interfaces (Common Interface) in TVs and digital television receivers to provide subscribers with access to encrypted media content in digital television (Wikipedia).

Most modern TVs already have a built-in satellite receiver (DVB-S2), which only needs to add a device for decoding channels - a CAM module. Since each operator has its own coding system, each operator (Tricolor, NTV +, etc.) has its own CAM module. Thus, using the CAM module of a certain operator, you activate the receiver built into the TV and view the satellite channels of the selected operator without using an external satellite receiver.

Advantages of using the CAM module:

Control from one remote control. It would seem a trifle, but it is VERY CONVENIENT.

TV must support DVB-S2 and the Cl+ module. You can find out this information from the technical documentation for the TV or by saying the model of your TV when buying a CAM module.

How to connect and configure the CAM module?! In fact, connecting and configuring the CAM module is extremely simple and can be handled without the help of specialists. Below is a detailed description of how to install and configure the CAM module, it will be relevant for all popular operators - Tricolor, NTV+, Telecard, Rainbow etc.

Installation and configuration of the CAM module.

The first step is to correctly insert the access card into the CAM module. To do this, turn the access card with metal contacts up and insert it until it stops, while the CAM module should be facing you.

Then turn off the TV and insert the CAM module into a special slot (PCMCIA slot), usually located on the back side of the TV. The module must be inserted facing the wall.

Connect your satellite dish to your TV.

After that, turn on the TV.

Before setting up satellite channels, I recommend that you make sure that the TV "sees" your CAM module, to do this, go to the TV settings and look at the information about the CAM module. For example, on LG TVs, for this you need to go to "Settings" - "Quickly" - "Search for channels" - "CI data (CAM)"

After that "Module".

Select your module, in my case it is Tricolor CI plus CAM

And see information about it.

If the TV "does not see" the CAM module, then you have not inserted it correctly, turn off the TV and insert the CAM module correctly.

Setting up satellite channels through the CAM module.

Below I will describe how to set up the CAM module on an LG TV, for other TV models (Philips, Samsung, Sony, etc.) everything will be the same.

Go to the TV menu, to do this, press:

1) on a conventional TV remote control, the "Settings" button

2) on the magic remote control the "Input" button

and select the "Settings" button on the TV.

From the "Quick" menu, select "Search for channels".

Select "Auto Search"

Specify "Satellite" in the settings mode and click "Next".

From the list, select the operator whose CAM module you are using, in this case Tricolor.

If you are using the popular operator Tricolor, NTV+, etc., then in the next step just click "Next", otherwise click "Settings" and make the settings corresponding to your satellite operator.

The next step, click "Run" to start searching for channels. You can also specify a more accurate search by selecting, for example - Skip coded channels, etc.

An automatic search for satellite channels will start, you must wait a few minutes before it ends.

As a result, you will see the number of channels and radio found, now you can click "Finish".

As a result, you have set up satellite TV using the CAM module.

Video settings of the CAM module Tricolor, NTV +, Telecard, Raduga.

Tsareva Larisa 17763

Nowadays, it is not at all necessary to purchase a separate tuner for the TV. Many modern TV models already have built-in receivers and special slots for CAM modules. All you need is to choose the desired operator, buy a module and a smart card from him, and enjoy the selected channels. The Tricolor TV CAM module is one of the most popular. Perhaps users most often choose this operator because of the favorable ratio of prices and quality of services. Not everyone knows how to connect and configure the Tricolor TV cam access module, so detailed instructions will be given below.

What is needed to connect the Tricolor TV CAM module?

To watch the desired paid channels through an access card, you need to purchase:

satellite dish;
RG-6 cable that connects the satellite dish to the TV;
Circular polarization converter;
Conditional access module CAM Tricolor TV;
Tricolor TV smart card (it is offered with the module and an annual subscription, in the future you can buy the card separately).

Prices in online stores:

	compyou.com	12 320 R




More offers

How to connect and set up?

First you need to tune the satellite dish to the broadcast frequency with which the Tricolor TV operator works. To do this, you need to set the parameters "Eutelsat W4 / W7 36.0`E". Connect the antenna with a cable through the F-connectors to the TV plug marked "SATTELITE".

For high-quality antenna tuning, it is better to call a specialist, but you can do it yourself if you are familiar with such matters. When everything is ready with the satellite dish, we proceed to configure the Tricolor TV CAM access module itself. Here all the manipulations will already be associated with the TV.

Prices in online stores:





Uni-sat Access module "Tricolor TV" CI+ without card (red)	uni-sat.ru	1 600 R

More offers

Following the elementary instructions, insert the smart card into the module cell until it stops:
Then install the module itself with the card into the TV slot (the TV must be turned off from the network!);
Through the remote control, reset all TV settings by setting them to default (press the “menu” button> “support”> “self-diagnosis”> “reset”, finish with the “ok” button and the TV goes into reboot);
When the reboot is completed, press "menu" > "channel" > "antenna" > "satellite" again.

Next, we get into the "satellite system" submenu, after which we press "ok";
Immediately, a window will pop up asking you for a PIN code, don't be scared, just enter "0000" and the system will show you the entire list of available satellites. Uncheck all boxes except Eutelsat W4/W7 36E. If the checkboxes are inactive, turn off the TV, remove the module, and then do the same again.
Once in "satellite selection" just click on Eutelsat W4/W7 36E. At this point, you will need to set the following settings for the LNB:

top gen. LNB-10750,

Lower gen. LNB - 0,

Transponder - 12226 H.

Then go to the "manual setting" menu and find the value "Transponder - 12226 H", then click on "search";

The photo of the settings was taken from a Samsung TV, but on other models the menu does not have significant differences, and all settings are made in the same way. if you want to watch satellite digital TV from your tablet or smartphone,

Many are faced with the problem of setting up a ci-module with the Tricolor TV operator on Samsung and LG TVs. To do this is quite simple. First you need to decide on the brand company that is the manufacturer of your TV.

Setting up the Tricolor ci-module on a Samsung TV

Setting up the Tricolor ci-module on a Samsung TV is carried out using the remote control through the standard TV menu.

To begin with, we carry out a simple manipulation, go to the "support" menu, then "self-diagnosis and "reset". Enter your pin and reset.
The next step, go to the satellite channel settings, see the installed satellite, click on the satellite selection line, on its name.
We create our own satellite with the name "User sattelite 1", tick and save.
Go to the broadcast menu and "manually" change by clicking create.
We write the approximate transmission rate, example "25500" and the frequency "16945".
Press the network search, it will run through all available transponders, press "ok".
Insert a module with an access card and "voila" all channels show.

Setting up the Tricolor ci-module on an LG TV.

A simple and quick setup of the Tricolor ci-module on an LG TV will take no more than three minutes.

We put our TV into the satellite channel tuning mode.
In the settings submenu, select the "Manual settings" item.
Set the network parameters from the first part of the article.
We start the search for channels, follow the instructions.
At the end of the search process, we save the list of channels and understand that we have configured the module.

Many manufacturers of popular brands note that often the correct setting is similar on other TV models and requires very little time and effort.

tell friends

Tricolor TV is a company offering high quality television broadcasts. However, setting up the equipment to work properly can be difficult. The digital technology market is very large, and each manufacturer contributes something of its own both to the models of receivers and to the TVs themselves. On most devices, setup is done automatically, while others require a more "personal" approach. LG TVs just belong to the second group.

Why the LG setting is different

In 2017, many companies changed their broadcasting conditions - a distinction was made between channels, which they now decided to sort by lists. This affected users in such a way that the list of offered Tricolor TV channels simply did not appear in the system, or appeared out of order / in incomplete form. LG TVs were especially susceptible to this problem, whose software proved unable to support the new order.

Difficulties arose mainly when users tried to search for channels using the "Quick Search" option. At the same time, LG TVs perceived signal decoding algorithms incorrectly, for which the company apologized more than once. Almost all product lines of the company for 2014-2018 turned out to be “amazed”, and some still demonstrate the presence of this problem.

LG is actively developing new software that would support the formation of such lists, which are used by Tricolor TV. Its launch is tentatively scheduled for July 2018. However, this does not mean at all that Tricolor TV subscribers who have LG TVs at home should refrain from watching TV programs, since there is a way to get around the problem on your own - and it lies in a slightly different sequence of settings.

In addition, most LG TVs were equipped with a CAM module, which replaces the standard receiver - the connection and its settings are somewhat different from the usual algorithm.

How to set up channels

Important! All of the following works on TVs running webOS.

Installation of equipment must be carried out in accordance with the instructions of "Tricolor TV" - installation of the antenna and dish, laying cables. The company offers customers a complete set of necessary devices in order to properly "dock" with the satellite and catch the signal.

One of the main stages is the installation of the CI+Cam module. In this case, the TV must remain turned off. It should be enabled after proper installation. At the same time, information about the equipment - about the card and the module itself - should be displayed on the screen.

Important! In some cases, error No. 17 may occur at this stage, which indicates that the equipment was connected incorrectly, or the subscriber forgot to register with Tricolor TV with card data.

After all these preparations, the channels are configured as follows (manually):

You need to go to the menu, where you should find the item "Advanced settings".
Select "Channels".
Select "Search for channels and settings".
You should select the "Auto search" option, despite the fact that you configure everything manually. Here you can enter unique settings for Tricolor.
The search mode should be set to "Satellite". If not, select it from the list.
Choosing a satellite TV operator is also an important option. For Tricolor today, you need to click on "Other operators".
Exit autosearch - click on the cross, or press EXIT on the remote control. If you have version 3 or 3.5 of the LG axis and the Magic remote, you should press the Back / Exit button with a hold.

After that, you can start manually searching for channels.

Re-enter the "Search for channels and settings" through the advanced options menu.
Press "Manual Search", and make sure the reception mode is set to "Satellite". If not, change it to this mode.
Open the "Transponder" settings item and select ANY from the list, avoiding the number 12226/L/27500.
Then press "Transponder" again.
Now select option 12226/L/27500 and see if the "Add" button appears on the side.
Turn on "Search for a network" - click on this item and change the value to "On."
Click the "Add" option you found earlier. Wait for the end of the search, and press EXIT.

Important! In some versions of the software, instead of "Add" will be "Update".

After that, the search for channels on the network will begin - during the search, the LG TV will check 22 transponders, and the result of such a check should be more than 300 channels, including radio and service arrays.

The list of channels will be formed in a special way due to the fact that new software has not yet been released for Tricolor TV. It will contain:

Presence of digital and satellite services and radio channels;
the order of the channels is reversed.

However, the list editor will be available, and you can easily select and mark those that the TV should continue to skip. The "Skip" function will help to hide them from the general list in order to facilitate navigation.

Setting up and connecting the Cam-module
Tricolor TV

Currently, some modern televisions are equipped with an integrated satellite tuner and a Cam-module connector that allows you to view TV channels from satellite operators. To view the channels of the satellite operator Tricolor TV, it is better that your TV set supports HD AVC (MPEG-4 H.264) broadcasting standards, which will allow your company to view programs both in the highest quality HD and in SD formats.

To connect the Tricolor TV Cam-module to a TV set, you need to purchase the following equipment:
1. Instructions on what is actually how to set up satellite Setting up satellite TV on Tricolor TV. How to set up satellite influence on channels on lg tv. Cam-module Tricolor TV;
4.5. Smart card (included with the Cam-module and a one-year subscription);
3. Satellite dish;
4. Don't know how to set up Smart TV on Samsung TV » How to set up Smart TV. Radial polarization converter;
5. Correct setup of Tricolor on Samsung TVs Tricolor on how to set up, module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV on as on the screen (10750. How to reset the settings on the Samsung Galaxy S8 and S8. RG-6 cable (or equivalent) for connecting a satellite dish to a TV set.
Next, you need to install and configure the satellite dish on the broadcasting programs of the Tricolor TV satellite operator (Eutelsat W4 / W7 36.0`E) and connect it with the TV cable and F-connectors to the plug of your TV set labeled "SATTELITE".

Tune

a satellite dish is an option without the help of others, but for high-quality broadcasting it is better to turn to specialists.

Further setup work

Cam-module Tricolor

We produce TV specifically with telecom:
1. We insert the smart card into the Cam-module in full (accordingly, the annotations on the sticker);

Module

CI on TV

Samsung

Process setting satellite channels Tricolor TV on TV set Ultra HD brand Samsung. online store: .

Read also

How to uninstall Smart TV apps LG, SamsungSmart TV development is designed to use various integrated ones, as well as user installation of the necessary applications, as well as access to the web for the TV set. Smart TV provides a lot of useful features and...

How to delete an Instagram page if you forgot your password: and mail, via phone and computerDeleting Instagram if you forgot your password is a problem caused by various reasons. A person decides to delete the page due to lack of necessary ...

The computer does not see the network Several times I came across an issue in the comments that said that when setting up a local network through a Wi-Fi router, there were problems when a computer running Windows 7 did not see a computer in Windows XP. There de...

Extraordinary true story, average Netflix movie. Release date of the ballet Yeh. Friday on Netflix Written and directed by Sonia Taraporova Julian Sands, Jim Sarb, part of the cast of Yeh Ballet Manish Chauhan as Nishu in Yeh Ballet In the late 20...

How to install canon lbp 1120 printer on OS 10 x64Download driver Canon LBP 1120 x32 (x64). Irkzus blog on IT skills. equipment repair, website setup, SEO You can’t find official drivers for OS x64, it was easier for us at the workplace and ...

More than a month ago, it was reported that older iPhones with low-capacity batteries were slowing down. Apple eventually confirmed that it slows down older iPhones that have naturally degraded batteries. The company adopted a lot of cotton for this...

Why you can't do autotuning

Tricolor channels

TV on Samsung TV

Manual setting TV Samsung to satellite Tricolor TV. How to set up WiFi (wi-fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an lg TV. We set it up in such a way that it would be federal.
2. Insert the module into the TV connector;
The first two points are performed with the TV turned off.
3. How to set up Smart TV on a Samsung, Lg, Philips, Sony, Saturn TV. Connect your Samsung TV to the Internet using a network cable, WiFi wireless connection, WPS, Plug & Access. Use the remote control to reset the TV to factory settings. For this

press the button

. "menu" and select:. "support". "self-diagnosis". "Reset", press the "OK" button, after which the TV will reboot;
4. How to set up a Samsung TV to receive channels. How to set up sound on Setting up digital channels on lg tvs. digital channels. After reboot finished

press the button

5. In the "channel" menu, go down to the "satellite system" submenu and press "OK";
6. A window will appear asking for a PIN code, where we enter the values. 0000 (default), a list of satellites will appear, where you need to uncheck all the checkboxes opposite the list of satellites, except for the satellite with the designation. Eutelsat W4 / W7 36E (if you can’t uncheck the marked satellites: pull the module out of the TV and reset the TV settings again);
7. How to enlarge Asus Eee PC? Replace its native 512MB RAM module with 1GB. We go to the "satellite selection" menu and select a satellite. Eutelsat W4/W7 36E.

Read also

Headphones from a mobile phone are found in each of us. Usually, such an ordinary, but so necessary device migrates between the pockets of jeans, a jacket and a bag, therefore it quickly burns out and asks for a change. Don't rush to take it out to...

Coming up with the best $150 gaming monitor? Your gaming experience largely depends on the monitor you choose. Along with the right pair of speakers, you need to enjoy an incredibly addictive gaming experience if you have a good mo...

How do I enter the boot menu on my laptop and computer? Do you want to boot your computer from a USB drive in other words a disk? For this purpose, you do not need to enter the BIOS settings. Especially if you don't know much about here. Ultimately, of course more p...

modelPhone Charging Precautions Not Easy to Find OutGT-S5560Solutions and TipsHow long a phone or tablet battery should last. The operating time of the battery depends on several Unfortunately, it was not possible to find a single cut ...

CAM-module or conditional access module is designed to view scrambled satellite or cable channels. It is inserted into the CI slot of a TV or receiver and decodes channels intended for pay-per-view. Some receivers, such as Skyway Classic 4, have two CI + slots, which allows you to watch pay channels of two different operators at the same time (for example, Tricolor and NTV +). Today, many TVs are equipped with a tuner for receiving a satellite signal and have a slot for a CAM module. However, in order to view the encrypted channels of Tricolor and NTV + operators, the tuner and slot must meet the following characteristics: the tuner must support the DVB-S2 format, and the slot must support the CI + format. Although most brands of TVs meet these requirements, you should carefully study the specifications before buying.

Since the modules are a fairly new development, many people find it difficult to initially set up and operate CAM modules.

I would like to start with the fact that the installation of modules on TVs from different manufacturers varies and sometimes very seriously. LG proved to be the simplest and most loyal to the module. Here it is enough to insert the module into the TV. Select a satellite dish in the menu and search for channels of a specific operator (Tricolor or NTV) and it will automatically and correctly find the channels of the selected operator.

But the most problematic in terms of settings are Sony and Thomson TVs. You need to manually add the name of the satellite to them (recall that the satellite of the NTV-Plus and Tricolor operators is called Eutelsat W4 or Eutelsat 36E), as well as add the transponder parameters (frequency: 12226 for Tricolor and 12322 for NTV +) and the local oscillator frequency of the converter for both operators: upper and lower frequency - 10750. Then you need to select "search on the network", and the TV will find all the channels of this operator. If there is no “network search” item in the menu, then all transponders will have to be added manually. A complete list of transponders is available on the operator's website.

Now let's look at the most common problems and errors when working with the CAM module. The first and most common problem occurs during the initial initialization of the module by the TV. When this happens, the TV sees the module, the menu displays all the information about the module and the card, however, when the channel is turned on, it writes an error (the error code and explanation are different for different brands and TV models). In such a situation, you need to act as follows: turn off and turn on the TV. After turning on the TV, the access rights check between the TV and the module will start again. In most cases, this method is more than effective. However, in some cases, for example, after a voltage drop in the network or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.

Now as for the problems associated with the software modules and TVs. Problems with incorrect work with modules are usually found on early TVs. But these problems, fortunately, can often be fixed by installing the latest software for your TV. As for updating the module software, it occurs only from the satellite. In the NTV + modules, the update can be forced by simply selecting the required item in the menu. In Tricolor-TV access modules, satellite updates are broadcast for a limited amount of time (1-2 months), if during this time you did not have time to update the software, you will have to wait for the next one.

Despite the simplicity of the design, the CAM module cannot be bent, disassembled, and it is not recommended to reprogram the module, except for the official operator software. You also need to protect the module from moisture, and if you pull the module out of the TV for a long time, make sure that its connector is not clogged.

Despite the complexity of the initial setup, CAM modules are an ideal alternative to satellite receivers. Due to their simple design, they are more reliable than a receiver, they do not need an outlet, a remote control, and they do not take up space.

Important! Since Tricolor and NTV + use different encodings (NTV + uses Viaccess, and Tricolor DRE-crypt), therefore, NTV modules do not fit Tricolor cards and vice versa.