How to set up tricolor on samsung. Self-configuring the CI module on LG, Samsung, Philips and Sony TVs. Why you can’t auto-tune Tricolor channels

class="eliadunit">

First, reset the TV to factory settings. Menu> support> self-diagnosis> reset> ok. After the reboot, go to the menu> channel> antenna> select the value "satellite". (by the way, pictures with a preview - click to enlarge)

We uncheck all the satellites that are set by default (if this fails, you need to pull the CAM module out of the slot and reset the TV again), scroll through and select the EutelsatW4 36E satellite, select the transponder in the LNB settings 12226 , lower gen. LNB- 0, top - 10750.

Then go to "manual settings", look for the transponder 12226, turn on "network search" and press "search".

Then you can sort the channels as you like (it's better and more convenient to do this using the Samsung Channel List Editor program)

If the satellite EutelsatW4 36E is not in the settings, do this:

Select "User sat 1".

We create our own satellite (put a bird in front of it) and save it.

We go into the LNB settings, set everything as in the screenshot.

We do not put anything in the "transponder" section, we will add them manually.

In the "transponders" section it will be empty, select "create".

We need transponder frequencies, bit rate and polarization type for each channel package. I will list:

Attention!!!

The flow rate in all cases will be 27500, except for the frequency 12190 L for it - 20000.
Not all transponders have polarization type (L), for 12054 (R)

Now we create all these transponders (continue).

We drive in the frequency (with numbers directly from the remote control), the transmission speed (also from the remote control) and select the type of polarization (L or R). Click "save".

The network name "Tricolor" appears, click "search" and "OK".

The channel package for this transponder is scanned and stored in the TV's memory. Then everything is repeated for each subsequent transponder. In the same place, in the "manual setup" menu, click "scan" in the "transponder" section, create the next one with your data, and so on. All previous filled and scanned transponders with settings and channels are saved.

As a result, we get 238 (together with the radio) Tricolor channels.

Outdated equipment is gradually being replaced by new, more convenient and functional analogues. This process has not bypassed satellite TV, and therefore the question of where to buy the Tricolor TV ci cam module should no longer surprise anyone. Moreover, this device has a number of significant advantages over traditional receivers that viewers will definitely like.

The only significant drawback of the device is its high demands on the TV with which it will be used. Not every model will be compatible, and therefore, before buying equipment, it is worth clarifying whether there is any sense in acquiring it. Perhaps, it is worth giving preference to traditional equipment, which has not yet lost its relevance and relevance. In a word, users should study all the features and important nuances of connecting, configuring and operating the module, and only then make a decision on connecting satellite television.

Why you need a conditional access module

The main purpose of the proposed Tricolor TV ci module is to connect television. This device is a full-fledged analogue of a standard receiver, endowed with several significant advantages.

Among them stands out:

the absence of unnecessary equipment and wires that spoil the appearance of the room;
high quality broadcast (Full HD) and stable connection;
using the usual methods of system management.

Of the minuses, it should be noted again the high demands of conditional access modules for TVs. They are compatible only with modern smart TV, which not all viewers have. In addition, users may have a little difficulty setting up, since the channel search process is slightly different from what it used to be.

Where to buy CI-CAM module Tricolor TV

The question of where to buy the Tricolor cam module should not worry users. To purchase equipment, just contact any official store of the provider:

to the online store on the official website;
to licensed dealers;
In addition, you can visit large retail chains.

You can find out the exact address of the nearest outlet where you can buy equipment and prices on the website of the satellite operator or contact center consultants by calling 880050001234. There will definitely not be any difficulties in finding information.

How to connect the conditional access module ci cam Tricolor TV hd

The process of connecting the Tricolor TV conditional access module, as mentioned above, is extremely simple. To connect the equipment, you will have to:

install a satellite dish and catch a signal;
insert the smart card into the module, paying attention to its position (it must be turned correctly);
insert the device into the ci-slot of the TV;
connect the antenna cable to the appropriate socket on the TV;
turn on the equipment, configure and search for TV channels (automatic can be used).

Then you can safely watch your favorite programs and programs. At the same time, the most difficult part of the connection, with which subscribers may have problems, will be the installation of the dish, since they will have to find the correct angle of inclination and rotation of the antenna. The remaining steps will not cause difficulties.

Setting up the Tricolor ci module on an LG TV

After connecting the cam module, it needs to be configured. Users are able to cope with this task on their own. If they have an LG TV, you need:

turn on the equipment;
set the basic parameters on the start page, including the type of antenna and converter, satellite and the correct frequencies (12226);
turn on the power on the same page by moving the switch icon to the on position;
make sure the signal is reliable and the position of the antenna is correct (the scale that appears must be more than 80% full);
start an automatic search for TV channels;
save the results;
select sound quality (MPEG4);
return to the start page again and enter the activation code.

Usually this is sufficient.

On a Samsung TV

Setting up Tricolor with the ci module on a Samsung TV is a little more difficult. In this case, users will have to:

open the Samsung settings menu and select the User Sat1 satellite;
make changes to the LNB section by specifying the same parameters for the upper and lower frequency limits;
open the channel settings section and re-specify the satellite;
click "create" in the line with the mention of the transponder;
specify frequencies and speed;
start automatic search for TV channels.

It is worth adding that subscribers will need instructions that come with previously purchased equipment. It contains the necessary information for the correct configuration of the equipment and the indication of suitable connection parameters.

How to update the software of the Tricolor TV module

To update the Tricolor TV ci ultra HD module, you need:

enable channel 333;
wait for a message prompting you to update the software;
start the process and do not interrupt it until it is completed (do not turn off the TV);
select the broadcasting region;
agree to the proposal to search for TV channels;
save the result.

Additionally, you should know that if there is no message offering to update the software, you should open the menu and find the pop-up message management section, where you need to turn the slider to the on position.

Where to go in case of failure

In case of difficulties with setting up, connecting and updating television or there are no channels in Ultra HD, subscribers should:

contact the contact center consultants using any available method (preferably calling 880050001234);
or call the dealer from whom you purchased the equipment.

How to set up Tricolor on a Samsung TV? Before performing such an operation, let's go through the instructions for hardware connection of devices:

connect satellite dish to TV:
- directly connect the antenna through the "Satellite" jack. In this scenario, home appliances will be able to automatically pick up the digital information supplied by the antenna. The final picture is displayed;
- connecting the antenna through a satellite receiver is a working method in the absence of the above connector. Here, the receiver is already responsible for receiving and broadcasting the signal to the screen. In appearance, it resembles an ordinary video recorder.
start searching for TV programs, but more on that later - first, consider the algorithm for resetting the settings to the standard ones set by the manufacturer.

Restarting the configuration is useful when the user independently performed the steps to configure the mode of use of the equipment. We go to the support section, then we go through the following hierarchy of folders and items:

"Self-diagnosis";
"Reset";
specify the PIN-code (standardly there are four zeros in this field);
confirm the intention to reset the connection settings.

Please note that in the current step you do not need to attach the Cam module.

Setting up the CI module on a Samsung TV

How to set up the Tricolor Kam module on Samsung TV:

11727 L	11958 L	12226L
11747 R	11996 L	12303 L
11766 L	12034 L (4K)	12360R
11804L	12073L	12380L
11843 L	12111L	12418L
11881 L	12149 L	12456 L
11919L	12169R	12476 R
	12190 L

the "Tricolor" network will be displayed - click on "Search", and then - on "OK".

After the steps taken, you have set up a set of digital TV channels for viewing. Then you need to repeat the same manipulations for all 22 transponders - you get 289 channels, taking into account the radio transmission. After installing the Cam module, the "General interface" section is activated and access to the found channels is opened.

Automatic setting

How to set up the Tricolor Kam module on Samsung TV using the automatic search for TV shows:

go to the "Broadcast" tab of the device's menu;
select "Auto-tuning";
then you need to click "Start" in the pop-up window called "Auto-configuration";
select the line "Satellite dish" from the drop-down list;
mark the type of channels that you intend to find by automated means (TV, radio or all mixed);
check the box next to the name of the satellite;

When the name of the correct satellite could not be found in the catalog, resort to manual tuning.

write down the information in the frame called "LNB Settings", specifying it with the operator providing satellite communications;
make sure the signal strength is between 80 and 100 percent. When the broadcast does not reach 80%:
- deactivate "Tone - 22KHz";
- make sure the antenna is connected correctly;
- be prepared for the possibility of interference when broadcasting TV programs;
click on "Scan";
wait for the technician to find available channels;
click "Close";
close the configuration menu directly.

Conclusion

We figured out how to set up the tricolor Kam module on Samsung TV. Now we will give a number of warnings, the implementation of which will help to avoid errors in setting up the equipment:

the procedure for integrating the module takes place in accordance with a specific hardware. This means that you will need to read the instruction manual for the TV model;
CI setup is completed with an upgrade of activation keys. An upgrade request is made on the Samsung resource in a pre-created account.

Return to the default configuration if something went wrong during the setup process and it was not possible to save the channel list!

class="eliadunit">

If your TV supports CAM modules, then you can watch paid satellite TV on it, such as Tricolor TV, NTV Plus, TELECARD, Raduga TV, etc. You just need to purchase a smart card from the operator you need , module for this card, and insert the card with the module into the TV's CI slot.

When choosing such a TV, the main thing is not to confuse it with DVB-T2, even if you tell the seller that you want a TV with a built-in receiver, it can sell you instead of DVB-S2, DVB-T2, and these are completely different things. Usually, by the name of the model, you can read what kind of receiver is installed on the TV. For example, in "LG" in the model name "47LM580S-ZA" the letter "S" indicates that the TV has a built-in DVB-S / S2 receiver.

The surest way to determine if a satellite receiver is on a TV is to look back, where all the connectors are located, and find the antenna input "LNB IN".

All such TVs have a "CI" slot for "CAM" modules. The "CAM" module is selected depending on the encoding in which the content is encoded, for example, if it is "Tricolor TV", then the "DRECrypt" module is needed, and preferably the latest version. There are no problems with the module, it can be easily purchased in a special store.

Brief instructions for setting up the CAM module "Tricolor TV" or "NTV PLUS" on LG TVs.

1. Install the Tricolor TV access smart card into the Tricolor TV conditional access module (CAM WEST CI+). Chip to the thick side of the module.

2. We install the conditional access module in the switched off TV.

3. Turn on the TV and watch information about the module and access card, if there is no information or error code 17, check the installation is correct and go through the equipment registration on the Tricolor website.

4. In the TV menu, in the settings, select the type of antenna " satellite". In the settings of the Tricolor satellite antenna converter, specify the satellite Eutelsat 36A/36B. converter type single. Converter power supply (LNB) - on. LNB 10750. transponder frequency - 12226 MHz or 12111 MHz or 11881 MHz (settings are by default) the flow rate is 27500. We look at the signal quality.

5. Go to channel setting and turn on automatic search(in new generation TVs) transponder frequencies from 11881 to 12418 will be registered automatically. At the same time, it is desirable that the TV be flashed with the latest software version, in this case the Tricolor TV CI + CAM module will work more correctly, all transponders will be up-to-date, and you will correctly scan the desired channels.

6. If everything went well and the channels were found, go to the sound settings on the TV and set it in the " Digital TV sound settings" parameter MPEG. This is done so that the sound on the channels does not disappear when viewing. Go to module settings CI data (CAM) orCI Options > Settings and select " Reset to factory settings". Turn off the TV completely.

9. An important feature of LG TVs is the “Automatic channel update". It must be turned off, otherwise the TV will periodically reset the channel list you configured.Go to settings"Channel Auto Update"and set the parameter:off.Now you can fully enjoy the possibilities of your TV, watching high definition channels. Enjoy watching and bright emotions!

NOTE:

Problems with sound or incorrect switching of Tricolor TV channels on the CAM module were fixed in the CAM module update in December 2014.

For self-updating via the CAM module on the TV, find the service channel in the list of channels of the Tricolor TV operator for updating by - " Telemaster".It usually goes under the number333 according to the operator's list. If it is not in the list, scan the channels again.

After you switch to it, you can update the CAM of the Tricolor TV module via the TV menu CI data (CAM) or CI Options > Settings > Software Download > OK. If new software is available and you are prompted to upgrade, click the button OK on the remote control after which the software update percentage will go. It is necessary to wait for the complete download of the module software from the satellite and, after the update is completed, reset the module to factory settings: CI data (CAM) orCI parameters > Settings > Reset to factory settings > OK

After the update, everything works correctly, no glitches are observed, all channels are always in place and with sound. CHECKED!

Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > Providers > Tricolor TV You can view information about packages and their expiration dates.

Subscription class breakdown:

Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > General Information you can find out ID numberTricolor TV smart cards for extending and connecting various TV channel packages.

If, after changing the frequencies by the Tricolor TV operator, channels are not scanned on your TV, or the number of channels after scanning is less than 100, do the following: (Thanks to user Dim)

The problem was the same as everyone else. 70 channels, random numbering, etc. etc.
The CAM-Module software is up-to-date, the TV software (let's say LG MT24) is the latest version. Nothing has changed since the software update.

Reset the TV to factory settings. In the settings of the satellite dish and channels, we set the Satellite for Tricolor and NTV + - "Eutelsat 36b" or "Express-AMU1" or "Express-AT1" at position 36 ° E.

In the settings, you can also create a new satellite with the necessary parameters yourself:

Converter Type: Single/Single

LNB Power (ON)

Just add one Transponder/Frequency Tricolor TV: 12111MHz or 11881MHz Horizontal 27500

The most basic thing is to select one of the transponders Tricolor TV 12111MHz or 11881MHz from the list of transponders Polarization-H (Horizontal) Flow rate 27500.

Then we select Manual search, select the home transponder for Tricolor (12111 or 11881) and be sure to check the Network / NIT search box. Click update and wait for a while. All channels must be registered in normal numbering. All the best.

Engineers in various industries are constantly trying to introduce new and improve existing technologies. Not a single industry is left without development, which positively affects the standard of living of all people. This also includes satellite television. A few years ago, CI modules did not exist.

Device Features

Quite often, an important point in connecting television in this way is the presence of a built-in receiver. The presence of a pre-installed device greatly simplifies use, because there is no need to make an additional purchase and install equipment. This is the first thing you should pay attention to when the question arises of how to set up HD satellite television.

Also, it is worth noting that the cam-module should be selected relative to the required encoding. Regarding satellite television Tricolor, the module of the latest version of the format "DRECrypt. This approach can guarantee a comfortable enjoyment of HD TV.

Installation and setup

Setting up the Tricolor satellite TV cam module does not take much time. The order of installation of this device is as follows:

The cam module must be installed in the CI + port with a thick side. The TV must be turned off.
The installed Tricolor module can show two situations after switching on. First - everything is installed correctly and information about the module and access card is visible on the TV. The second - during installation, an error was made due to which, instead of information, there is only the inscription "error 17". In this case, you need to double-check the correctness of the installation and register on the website of the satellite television operator.
Next, you need to specify the type of antenna - "satellite" and the required satellite - Eutelsat 36A / 36B. Converter type should be selected "single". Converter power supply to on mode and select LNB Transponder purity can be set to 12226 MHz. After that, you should check the quality of the signal and broadcast.
If everything works fine, you can proceed to the search for channels. In the menu item "channel settings" you need to select the automatic mode, because in this way the entire search will take place automatically. An important factor here is the firmware version of the TV software. The later version, the more correct the search will be and more channels will be found.
After a successful search, you need to start setting up the sound of the channels. To do this, go to the "Digital TV Sound Settings" section and select the only suitable MPEG option. Only in this mode, the sound will not disappear while watching TV.
You should go to the menu item "CI data" and in the settings select the option reset to factory settings. After that, you need to completely turn off the TV.
After this procedure, you need to turn on the TV and leave it to work until all the necessary HD channels appear. This will happen gradually and may take from 2 to 8 hours.

After correctly performed manipulations, broadcasts in HD format are available for viewing, and the settings of the cam module of the Tricolor television are completed. Also, you should remember about the features of LG TVs. In the settings menu, automatic updates and channel search are enabled, unlike Samsung devices. This mode can harm the order of the configured TV channel list, as resets may occur. For ease of use, this function is recommended to be switched to the “off” mode. Read also