How to call from Tele2 when the balance is depleted? How to send I'm waiting for a call from Tele2 to another subscriber Number I'm waiting for a call

When there is no money on the balance of the mobile number for the call, and at the same time it is necessary to urgently contact the person, you can use the beneficial service from Beeline "Waiting for a call", which allows you to send a message to the subscriber containing a request to call you back. This request is completely free and can be sent to the number of any mobile operator located both in Russia and in the CIS countries and Georgia.

"Beacon" is a short SMS message, which can be sent both with zero and with a negative account balance. The SMS request sent to the subscriber contains a short phrase “Call me back, please”, as well as the number from which this request was sent. If the request is successfully delivered, the sender receives a notification. However, this does not guarantee the fact that the subscriber will respond to the sent beacon - it depends on his desire.

How to send "Waiting for a call" from Beeline?

In order to send a message to a subscriber within the framework of the “Waiting for a call” service, there is no need to pre-connect and configure the service. Each subscriber of the Beeline operator has access to sending a beacon, provided that he is on the home network. The Beeline service "Call me back" sets a limit of 10 available requests per day. In order to send the “waiting for a call” message again after reaching the limit, you must wait until 00:00 hours.

In order to “send a beggar” using the “Waiting for a call” service, dial and send the command *144*+7XXXXXXXXX# from your mobile phone, where you need to indicate in the international format the telephone number of the subscriber to whom you want to send a request for a return call. After completing this action, wait until the request is sent - you will find out about this thanks to the delivery report.

On Beeline, a request to call back is available even when you are roaming, which allows you to “send a homeless person” from another state completely free of charge. However, it should be remembered that the sender will be able to receive an incoming call only if the balance of his phone is positive, because. in international roaming, in most cases, incoming calls are paid.

Service management

If requests for the "Waiting for a call" service from other subscribers bother you, you can turn them off - dial the command *144*0# from your phone. This will allow you to set a complete ban on receiving beacons. You can re-enable the ability to receive “Call me back” requests by sending a short and free command *144*1# . Setting a ban is possible only for Beeline subscribers in Russia.

10.07.2018

Probably, every owner of a mobile phone has come across such a situation when it is necessary to call urgently, but the balance does not allow it. Until relatively recently, such a circumstance caused a lot of inconvenience to cell phone owners: it was necessary to urgently look for an account replenishment point, call back from a landline number, etc. Today the situation has changed dramatically due to the fact that all companies that provide such services are trying to make communication as comfortable as possible. And today, many mobile operators provide such a service as asking another subscriber to call you back. This service is also offered by one of the largest mobile operators Tele2, it is called “Waiting for a call”.

How does the Call Waiting service work?

Many modern operators make it possible to send a request so that another subscriber calls back only a few times a day, which cannot be said about Tele2. The company does not so strictly limit the number of requests from its users. You can send "Waiting for a call" completely free of charge up to 50 times in one month.

Many cellular users do not know how to send "Waiting for a call" from Tele 2 if the limit is reached. In fact, in this situation, the operator went to meet its users by introducing a small fee for using the service at the end of free notifications. Its cost is more than affordable, so it does not bring significant material costs.

It is important to know! If the limit is exceeded, a fee of 50 kopecks is charged for using the "Waiting for a call" service, in roaming the cost is slightly higher and amounts to 59 kopecks.

After sending each request, SMS will be sent to the phone with a notification of the number of sent messages per month, which is very convenient, since it is possible to control the number of remaining free requests. It is worth noting that the notification comes absolutely free of charge and does not require any additional functions from the cellular user to connect.

If you want to know what it is, read our other article.

How the service works

If you do not know how to send "Waiting for a call" from Tele2, dial 634 . In the menu, you can not only learn more about the service, but also check the rest of the requests. However, if you often encounter such a situation, you should remember or write down the USSD command: *118* (subscriber's phone number) # (call button). After that, the subscriber whose number was specified in the USSD command will receive a message with the following content: "The subscriber and the sender's phone number ask you to urgently call back." Now it remains only to wait for a response from the person of interest.

Fact! The mobile operator Tele2 provides for the automatic sending of the “Waiting for a call” request if the subscriber was dialed in the absence of a positive balance.

To find out the number of sent requests, just dial the combination: *118# (call key).

Reading time: 2 min.

If the account "as luck would have it" ran out of money, and you need to make a call, use the "Waiting for a call" service. By sending a request to call back, you notify the subscriber of your desire to contact him. Thanks to this option, you can notify a loved one about the lack of funds in the account.

MTS makes it possible to send "Waiting for a call" not only between its subscribers, but also among users of other networks. So you can send a request to call back to subscribers of any operator without commissions and additional charges. In addition, this option can be used even with a negative balance.

All MTS customers can use this service, regardless of devices and selected tariff plans. You can send "waiting for a call" with zero on your account, so you can always stay in touch.

To send "waiting for a call" dial *110*number# and press call . Please note that the subscriber's number must be dialed in 11-digit format, starting from 8, for example: *110*89191234567# . The called subscriber will receive an SMS with the text “Please call me back”. Then everything happens at the request of the person who received your message - he will either call back or ignore it. The service is provided free of charge and does not require additional actions.

In some cases, the subscriber who was sent "Waiting for a call" receives a message about a missed call. This is usually displayed on the phones of other operators in the form of a missed call or SMS message with the subscriber's number and call time.

The service has a limitation: you can send no more than five requests per day to one or more numbers.

However, this service is not limited to possibilities at zero. MTS has alternative offers to the "Call me back" service - the services "Rescue" and "Top up my account". They are also free and can be used with a zero balance. In the first case, the call will be made at the expense of the interlocutor, in the second case, the subscriber will receive a request to replenish your balance.

The command to send a message "Top up my account": *116*number# .

Service "Rescue" - a call at the expense of the interlocutor: Call 0880 and follow the instructions of the autoinformer. Be ready to dial the number of the person you want to call.

The call at the expense of the interlocutor passes only when the called subscriber confirms the request. If he does not want to answer, the call will be interrupted, and a message will be sent to you about an unsuccessful attempt to contact. The request to replenish the account can also be ignored and remain on the conscience of the interlocutor.

If there are not enough funds on the phone to make a call, and making a call is a necessity, then how to send Waiting for a call from MTS? You can send a request to be called back, and the subscriber will be notified of your desire to speak with him. In the same way, you can notify loved ones about the insufficient balance on your phone.

The Company makes it possible to send such notifications to both MTS users and users of other networks. As a result: it is possible to send a request to call back for customers to other operators without commission and additional charges.

The service is available to all MTS customers, regardless of the device and the selected tariff plan, with a zero balance and a balance below zero. Thus, it makes it possible to stay in touch at any time.

Method via USSD command

How to send I'm waiting for a call from MTS: you need to dial *110*number (in eleven digit format, starting with the number 8)# and press the handset. That subscriber will receive an SMS containing the text "Please call me back." Further, a person can call or not, it depends on his desire. This option is free, no additional steps are required.

In some cases, the person to whom the notification was sent receives an SMS about a missed call, usually displayed on the screens of phones of other operators as a missed call or an SMS containing the caller's number and time.
The option has limitations: 5 requests for 1 or more phones per day.

Services "Top up my account" and "Rescue"

If you have a zero balance, then there are 2 more services that will help you get out of a difficult situation:

"Top up my account" option. Dial the command: *116*subscriber number# and press "call". He will receive a message with a request to replenish the account.

"Help" is a call that will be paid by another person. To use it, you need to call: 0880 and follow the instructions.

Making a call at the expense of the interlocutor is available only if the callee confirms the request. If the person does not want to answer, then you will receive an SMS about a futile attempt at communication. The request for replenishment of the balance may also remain unanswered.

If you find yourself in a situation that you need to make a call, but there are not enough funds, use the free MTS Call Me service. You can send your request to call back to users of Russian mobile communication companies by selecting the appropriate option:

Alternatives

If within 24 hours the “Call me back” service was used 5 times, which corresponds to the daily limit, MTS offers alternative options for how to still stay in touch with a zero balance. There are the following ways:

How to send a request to replenish an account

In order to send a request to replenish the account to another subscriber, you must use the appropriate section of the MTS portal.

It can be called using the combination *111*7# . In the opened menu, the user should select the item “Top up my account”, and then enter the number of the subscriber to whom the request is addressed. You can use the service 5 times a day.

How to prevent "Call Me Back" from being sent to you

If the subscriber is tired of receiving requests from other users with a request to call back due to a zero balance on the device, MTS specialists provide the opportunity to disable the receipt of such notifications.
To do this, dial the following combination of numbers on the phone: *110*0# and the call button. Disabling the reception of messages "Call me back" will be carried out within a matter of seconds. The subscriber will receive a corresponding notification about this. If it becomes necessary to re-enable the receipt of requests to call back, you can use the dialing *110*1# plus the call button.