Instructions for increasing the amount of disk memory c. Increasing the size of the C drive at the expense of the free space of the D drive Why does the drive increase with

Sometimes it becomes necessary to increase the capacity of the C drive at the expense of another partition. Most likely you need this, because there is almost no space on it, but you need to expand. In this article, I will analyze two programs that will help you do this and a small instruction.

We will talk specifically about increasing the C drive at the expense of another partition, for example, the D drive, while they must be on the same hard drive or SSD. If you have Windows 7, 8 or 10, then this guide will work for you.

It would be possible to do this by standard means, but unfortunately, it will not be possible to do this without data loss. Therefore, we will use third-party software.

How to increase the size of the C drive with Aomei Partition Assistant

A wonderful program that will allow you to expand the C section: hard disk or solid state drive called Aomei Partition Assistant. This program does not install with it various garbage, which some programs are famous for. Also, the program is in Russian with a completely understandable interface. Works on all operating systems starting from Windows 7.

The most important thing to look out for: do not correct work with partitions may result in data loss. If they are important to you, I recommend storing them in a safe place.

Download and install the program, I think there will be no problems with this. After launching, you will see a nice interface, although, for whom how. All your disks and partitions are displayed there.

In our case, as I said, we will increase the C section at the expense of the D section. Now we will do this.

Click on the D drive right click mouse and select "Resize Partition".

A window will open where we can change the size of the slider, or enter it manually. You need to make sure that the unallocated space of the partition after choosing the size is in front of it, as shown in the screenshot. Then click OK.

Now, in the same way, we change the section C, only now we increase the size on the right. It will grow due to the free space that we took from disk D. Click OK again.

After the work done, at the top of the program, on the left, there is a button Apply, press it.

Now the computer should be rebooted, usually there are two of them. As a result, the size of the C drive will be increased.

This is not the only function of the program. With it we can. Also, you can create a bootable USB flash drive in the program and resize the partitions in the same place.

How to Increase C Drive with MiniTool Partition Wizard Free

So, there is another not bad program called MiniTool Partition Wizard Free. It is free, does not install third-party software, but its disadvantage is that it is not in Russian, it may be difficult for some, but thanks to this article, you will understand everything.

The program interface is somewhat similar to the previous one. In principle, there are almost no differences from the first option. We will increase the system disk in the same way.

First, press on the D drive, and then press Move / Resize Partition up. Now we take the required size of the D disk, select it on the left and click OK.

That's all, after the performed operation in the explorer, you can already see the increased size of the system partition. Now you know how to do it.

You can download the program from here.

How to increase the volume of the system disk as standard

Standard means with standard Windows tools... You can do so, fortunately, like Windows 7, Windows 8 and Windows 10 there is such a function. But have this method disadvantage: the data on the D drive will be erased, therefore, you will need to first transfer them somewhere. Perhaps you decided to use this method, then, first, press the combination Win + R, a window will open in which you need to enter the command:

diskmgmt.msc

This will open the tool "Disk Management"... There you will see all connected drives and partitions. If there are additional sections, they are also called hidden, then I do not recommend touching them.

So right click on section D and select "Delete volume"... Subsequently, the data on the disk will be deleted, and free, unshared space will be formed to the right of the C disk.

To increase the volume of the system disk, right-click on it and select "Expand Volume"... Next, the volume expansion wizard will open, where we need to specify the volume by which we will expand the disk. You shouldn't choose a lot if you still need section D.

We increased the system disk, now we need to use the unused space that we have left. To do this, click on what is not distributed with the right mouse button and click Create Simple Volume... The drive will be assigned the drive letter of your choice, and it will also be formatted. That's all.

Now you can put all your important data back on the D drive.

The first, the most natural "devourer" of free space on the hard disk is the Windows operating system. During the operation of the PC, the so-called paging file is used, into which the OS unloads files if there is not enough random access memory... It is not recommended to disable the use of the paging file, but a competent specialist can change its size, if necessary.

Another "fruit" Windows work- creation of system restore points. The files needed to restore the operating system after a failure can take up a very decent amount of the total disk space and are not always needed by the user. If you save important data to an external hard drive or USB flash drive, and the installers of the programs you need to work are at your fingertips, then you can disable System Restore altogether. If you need restore points, periodically use them in case of system failures, then in the settings you can reduce their number, as well as the amount of space for them.

For Windows Vista or Windows 10, the path you need to follow to access the above settings looks like this: "Start" -> "Settings" -> "Control Panel" -> "System" -> "System Protection".

How to remove garbage after running various programs

Of course, the files that create various programs in the course of their work cannot be called junk in the full sense of the word, but after obtaining the desired result, they can be cleaned quite painlessly. For example, in the browser, you should clear the cache more often. After removing the programs, it is worth checking the place where it was installed and manually deleting folders and files that were created and not deleted automatically.

So there is almost no free space on the C drive and the question arose of how to increase the amount of free space on the C drive. Below are recommendations for increasing the free memory of the C drive.

1. Don't store a lot of data on your desktop

You should not store a large amount of data on the desktop, since the folder that stores the contents of the desktop is located on the C drive. Therefore, the more data on the desktop (movies, photos, music), the less free space remains on the C drive. ... It is best to store movies, photos, music, and other large files on the D drive. If you only have C drive, follow C and D and transfer large files to D drive

2. Clean drive C from temporary and unnecessary files

In folders with temporary files, sometimes tens of gigabytes of garbage accumulate. therefore it is necessary to clean the disc from debris. How to do this in the article.

3. Increase C drive by logical drive D

If HDD is divided into 2 partitions, then you can increase the size of the C drive by reducing the D drive. All data will remain intact. You don't have to worry about this. But this process can take a lot of time - up to several hours, depending on the size of the hard disk and free space on it.

To do this, you need the Acronis Disk Director program. Download image boot disk can . You can burn a disc using

Boot your computer from Acronis Bootable Disk. Select from the menu Acronis Disk Director 11 Advanced.

In the boot agent window, select Launch management console.

Now, first you need to reduce the size of the D drive to make space for increasing the local drive C. To do this, right-click on graphic image drive D and B context menu select item Resize the volume.

Move the mouse pointer over the left edge of the D drive so that the pointer changes to double-headed arrows, and hold down left button drag the pointer to the right. This will reduce the size of the D drive and free up space in front of it, which can then be attached to the C drive.

In field Unallocated space in front of the volume you can manually set the size to which you want to shrink the D drive and increase the C drive. The volume can be shrunk only to a size that does not exceed the free space on that volume. Then click OK.

Right-click on the C drive and select Resize the volume.

Now grab the right edge of drive C and drag it all the way to the right, thereby increasing drive C by the amount of unallocated space on your hard drive. Click OK.

Close. Now you can close the program and restart your computer. Disk C is enlarged due to disk D.

4. Install a larger hard drive and clone partitions

Reading time: 31 minutes

With prolonged use of the computer, the memory gradually runs out and the question arises, how to enlarge the disk? Usually, you have to increase the size of the system disk, since a little memory is usually allocated to it. This issue can be solved thanks to additional programs by taking memory from one disk and giving it to another.

How to increase disk space through Aomei Partition Assistant

Enlarge your Windows 10 disk with easily redistributable software - Aomei Partition, for which you don't need to pay. This application will help you learn how to increase the size of the C drive. It has a Russian interface, and when installed, third-party software is not installed along with it. The program is also supported in Windows 7 and 8.1. It is better to download the application from the manufacturer's website.

It is important to know if you turn off the power or do something wrong with the disks, the data located there will be lost. It is advisable to save the necessary information to a USB flash drive in advance.

So, install the utility, select the Russian language and run it. When the program opens, the existing disks and partitions will appear. To expand the capacity on partition C thanks to the D drive, you must:

1. Right click on the D drive, find it and click "Resize".
2. A window will be highlighted, in it we set the size manually, or with the mouse. It is necessary to move the slider that frees up space on the right, click OK.

1. We also click on the C drive, go to "Resize ..." expand the size of the disk at the expense of the space that appears and click OK.
2. To save the work done, you must click on "Apply". The application has a built-in deferred action system; until the manipulation is confirmed, no changes are made.

After the end, it will take two reboots of the computer, and we will see the resulting result.

How to increase memory on the C drive in MiniTool Partition Wizard Free

Also, this utility will help you figure out how to increase disk D. The main reason for using the application is to answer users' questions on how to increase the size of disk C. The software is loaded and works for free, unnecessary software is not loaded during installation, its disadvantage lies in the English interface.

Install and run MiniTool Partition Wizard Free by downloading it from the manufacturer's website. After opening the program, you need to:

1. Right click on the D drive, find and go to "Move / Resize ..." at this point we change the size so that the free space is "to the left" of the occupied one.
2. Next, go to disk C "Move / Resize ...", increase the size due to unallocated space, click OK. Go to home page and click "Apply".

After completing all the necessary operations, we will be able to see the result in Explorer.

Increase C drive with D drive without programs

There is an interesting way how to increase the C drive at the expense of the space from the D partition, its peculiarity lies in the possibility of execution by the built-in system tools. This is a one-of-a-kind method of how to enlarge a hard drive without using utilities. There is one drawback of this method - the need to delete all data from the D drive, but the necessary data can be copied to a USB flash drive in advance.

Algorithm of actions:

1. We hold down the key combination "Windows + R", a window will be highlighted, there we enter "diskmgmt.msc" click "OK" or press "Enter".

1. The "Disk Management" dialog box will be displayed, in it we will be able to observe all devices and their partitions. It is necessary to look at the partitions located in the root directories of C and D drives, if you find invisible partitions, it is not recommended to do anything with them.
2. RMB on disk D, go to "Delete volume". Upon completion of the deletion, we will have free place, not allocated anywhere, we will use it to increase the space on the C drive.

1. Now we increase the C drive, right-click on the media and go to "Expand volume". Here it is necessary to indicate the amount of additional space, usually all free memory is displayed, but you still need to leave it to create disk D. Expand the size by about 5 GB or a little less.
2. At the end of this process, the C drive will be expanded.

1. Right click on the unallocated space and go to "Create Simple Volume".
2. To do this, we use the wizard to create volumes, which uses all the remaining unallocated space and makes a disk with any letter.

The disk is ready, if necessary, we throw back all the information. As you can see, this issue is easily resolved.

If you still have questions on the topic "How to increase drives C and D?", You can ask them in the comment

Not sure how to find out the size of your drive? Is the Windows operating system throwing out warnings about the lack of free space? Let's consider how to expand the C drive on a computer.

Vista and 7 OS often baffle their users, because no one understands where the storage space goes over time. The system begins to take up more and more disk space, then there is a significant decrease in PC performance. Especially on machines with a small amount of RAM (1-2 GB).

Due to the fact that there is not enough disk space, the system tries to use a smaller virtual memory buffer, and when it is not enough, the devices begin to “slow down” and may not even start. With a careful approach, it is quite possible to find free space even on a very busy PC, for example, by increasing the C drive at the expense of the D drive, and this is quite possible, as third-party means, and in a regular way on Windows Vista and newer systems.

In the process of work, especially for a long time, users notice that free space on the system partition is constantly decreasing. The history of updates can tell where the space on the hard disk is lost.

OS from Microsoft, which are constantly updated, clutter up the system partition the most. In addition to system junk, browsers such as Opera contribute to Google chrome- they constantly receive auto updates, which is why the free space is getting less and less, moreover, these programs themselves are rather big, occupying 300-500 MB each. Also, you need to add to them the volume of downloaded files in the "Downloads" section (also located on the C drive).

Temporary files after watching movies online (they are loaded on the HDD when watching). After all this, it is not surprising that memory gradually disappears. Especially if the hard disk is partitioned so that there is "back to back" space for the system volume (for Vista and newer it is 20 GB, and for XP and older - 1.5 GB). Over time, the space may not be enough.

In addition, multiple installations of games, programs also take their place of honor in the top sources of cluttering the system disk. But how to make sure that there is always enough memory?

How to increase the size of the system volume

On Windows Vista and newer, the question of how to move memory from drive D to drive C is not difficult. It can be easily solved using standard system tools. It is enough to go through "Start" - "Control Panel" - "System and Security" - "Administrative Tools" - "Computer Management" - "Disk Management". You will see a window showing all partitions of the drive, even hidden and not supported (for example, from Linux). Above you can see the whole process in more detail by watching the video.

Remember, before increasing the space on the C drive at the expense of the D drive and others, it is advisable to save important data on external storage(in the cloud, on a USB flash drive, external hard drive, burning to DVD). To begin with, it is worth freeing up space on disk D. To do this, select this drive in the window and LMB call the pop-up menu, where select the "Shrink volume" command. It will help to "transfer" memory to the C drive as quickly as possible. A window will appear in which there will be only one editable partition, in it specify the size to which you want to reduce the disk. After setting the value, wait for the operation to complete. Next, go to drive C, highlight it, select "Expand volume" and in the window specify the value obtained from the previous operation.

Alternatives

except regular way, you can use third-party programs that will show you how to increase the C drive at the expense of the D drive in the optimal way. The most popular is the Acronis Disk Director Suite program. Was the free space greatly reduced on the HDD? Install the program on your PC, if there is little space in the system partition, put it on D or in other partitions where it is. Run it and select in the window that opens auto mode work. Then in the next window select the "Increase disk space" section. A window will appear with a list of disks, select the one that needs the most free space, and click "Next". After that, a volume is selected from which free space will be taken. In the program, you can even select several sections, and not one, as in the standard utility.

In the new window that appears, the program will ask you to specify the size of free space to move to disk C. You can manually specify the size or move the slider. Then click Next and Finish. Once on the initial window, the program will save the changes. In older versions of the utility, a device restart is required. In addition, I cannot but note that the program is paid.

Standard way or Acronis?

If you are interested in how to reallocate hard disk space on a computer running Vista and newer, it is easier to use the standard tools. For legacy systems, there are no options other than third-party programs of which the best is Acronis. This is a paid program that does not have full functionality on free trial versions and will not help you increase the size of the disk where the system is installed.

In addition to performing data movement, Acronis can also expand the volume, create backups, free up data and even test for errors. When the system partition takes up too much space, optimization is imperative. But before the operation, save the data.

Freeing up free space, you can also erase the partition, especially if you do not have much experience in setting up a PC. Do not forget about elementary caution. If in doubt, you should double-check the Acronis program management information, otherwise the changes will be irreversible.

A significant release of space is also possible with the "mechanical" deletion of the contents of the TEMP folder, it is located at C: \ Windows \ Temp.

Freeing up free space

If you have a catastrophic decrease in the space on the C drive, then you can stop the process by cleaning all the folders of temporary files and performing the cleaning using the standard system utilities. To get started, go to "Start" - "Control Panel" - "System and Security" - "Administrative Tools" - "Free up disk space", in the window that appears, select the C drive. The system will clean up, and if we are talking about Windows disk 7 or newer OS, the user can even choose which files he wants to delete: temporary files from the Internet, OS update files, other temporary data.

In this way, you can significantly free up space on your PC's hard drive. If these procedures have not been performed for a long time (or never at all, and the computer has been used for several years), then the procedure will significantly increase the performance of the PC, since garbage mixed with system files takes up all the free space of the drive.

Since drive C can only be increased by using other partitions, the procedure with small-sized old-style eMMC drives loses its meaning. They were 8 or 16 GB and, as a rule, were not partitioned. They only have to clean up to increase free space.

Free up space on Windows 10

The newest version of "windows", unlike the old ones, itself can free up space on the system partition. So, if the unallocated disk space is 0 MB, then the system will issue a warning and offer deep cleaning of unnecessary files.

Unlike the "seven", on Win10 you no longer need to think about how to increase the size of the C drive, because after installation and deployment, the system takes up to 8 GB on the 32-bit version and 12 GB on the 64-bit version. Naturally, after installing updates, disk space is gradually lost, but not as quickly and aggressively as on Win7. In addition, automatic cleaning effectively removes old OS versions and simply unnecessary temporary files.

If you are interested in the question of how to increase the space on the C drive under the operating Windows system 10, then in this version you can expand the volume by analogy with older operating systems. In the search menu of the system, enter "panel", the system will find "Control Panel", then the algorithm is similar to the one described above.

You can manually find a place on the C drive by going through the path: "Start" - "Settings" - "System" - "Storage" - "Drive C" - "Temporary files". Here you can delete the Temporary Files folder, as well as the Trash and Downloads.

Work on small drives

When a laptop or netbook has a low capacity 60GB or 32GB SSD, memory is sorely lacking. In this case, the problem of free space is extremely urgent for you. As a result, the question of how to increase the size of free space becomes a priority. Usually, computing systems are built not only from SSD drives, but also from several (stationary PC) or one HDD (laptops).

If this is the case for you, then you can simply transfer part installed programs to a magnetic drive. You will lose a little program performance, but free the system disk from unnecessary information. Although the hard drive is slower, the system will get free space to work.

When the system runs out of disk space, the only way to get it back is to clean up garbage, temporary files and move some programs to another partition or even a disk. Advice for amateurs is especially relevant computer games... Because of big size modern toys the capacity of cheap SSDs is sorely lacking. Using such a drive, you should know how to free up space on the C partition and periodically perform the cleaning procedure.

How not to break your laptop

If free space on partition C is literally disappearing before our eyes, then most likely this means one thing - your system is receiving intensive updates. It is they who can "clog" the permanent memory of the device. When users have a question about what to do, there is only one answer - to clean the system partition (C) from garbage. It is in it that the remnants of updates, files for downloading flash content, and programs for their auto update accumulate. As soon as the disk space begins to decrease, you need to take measures - to clean the computer of unnecessary programs and files, perhaps even transfer some of the free space from other partitions to the system one.

How to increase memory is described above. Never try to deal with memory expansion issues without Reserve copy, especially if you do not have sufficient knowledge. Otherwise, you can make the files important to you disappear without the possibility of their recovery. Before changing the volume, try to clear it of unnecessary programs... Or replace them with less resource-intensive ones (for example, Word 2003 counts hundreds of megabytes, and Word 2016 needs gigabytes to install).