How to enable touch controls on a compaq laptop. HP Notebook PCs - Using and Customizing the ClickPad

In laptops, it sometimes tends to turn off. This may be due to the fact that it is simply deactivated, disabled in the system, or out of order. We will not consider the last case, let's look at solving problems using publicly available methods.

on a laptop?

The touchpad on laptops is a touchpad that is responsible for controlling the cursor on the screen or issuing commands to the computer system.

Control is carried out by sliding your finger across the panel, pressing the space of the touchpad with one or more fingers, as well as using two or more buttons located below or above. Below are several ways to solve the problem of how to enable the touchpad on a laptop (Windows 10 on board) using various means.

What's the first thing to do?

If for some reason the touchpad has disabled, it may have been due to a system crash or short-term malfunction.

In its simplest form, you can simply try to restart your laptop. Since you will have to use the Win button, which calls the "Start" menu, and then with the up arrow to reach the shutdown line, press the enter key, select restart with the up arrow and confirm the selected action again with the Enter key.

It is important to remember that it is not recommended to use a forced shutdown by long pressing the power button, as this can cause system errors, and you will have to perform a system recovery at the reboot stage.

How to enable or disable the touchpad on a laptop (Windows 10) in the simplest way?

Laptops are complex and rather specific devices. However, almost all models provide several combinations that are responsible for turning on and off some devices and basic functions (sound, Wi-Fi, screen brightness, etc.).

Now - the solution to the problem of how to turn on the touchpad on a laptop. Windows 10 like operating system in this case it does not matter. It has nothing to do with inclusion anyway touch pad, so to speak, mechanically. This option uses the simultaneous pressing of the Fn key and one of the F1-F12 function buttons located in the topmost row of the keyboard.

Depending on the manufacturer of the equipment, F4, F5, F7 and F9 can be used as the power key together with the Fn button, less often F1.

Features of enabling the touchpad on HP notebooks

Among all such devices, it is worth mentioning HP laptops separately. In them, the manufacturer did not provide for a way to enable or disable the touchpad given above.

To solve the problem of how to turn on the touchpad on a laptop (Windows 10 is the operating system, the manufacturer in this way, you need to look at the keyboard. The corresponding button must be separately taken out on it.

In some models, it may not be present, and the solution to the problem of how to enable the touchpad on a laptop (Windows 10) is to double or long press in the upper left corner of the panel.

BIOS settings

In some cases, there may be a situation when the device is in a disabled state in the BIOS settings.

To remedy the situation, when the laptop is turned on, it is used to enter the settings of the primary I / O system, where in the Advanced section you should find the Internal Pointing Device device. To enable it, set the Enabled parameter, and then save the changes (F10). Next, the laptop will restart and the touchpad will work.

Enabling and disabling the touchpad

Now let's see how to enable directly Windows tools 10. First, we enter the standard "Control Panel" by selecting it from the menu of the right click on the "Start" button. You can also use control command in the Run menu (Win + R).

Next, as a view, you need to set the display of small icons, and then select the section of the mouse. In the properties window, a special Click Pad tab is then used, where the check mark is removed from the line to disable the internal pointing device when an external (USB) is connected. After that, the power button is pressed. If such actions for some reason desired result were not given, you should press the button to restore the default values. In the panel that opens, you select the restoration of all parameters, and then the system is restarted.

Automatic driver updates

Sometimes the problem of disconnection or inoperability can be associated with the presence of outdated drivers or their absence as such. It is logical to assume that they need to be installed or updated. Since these drivers are installed in laptops initially, you will have to update. Let's see (Windows 10) using this method.

This is done in the "Device Manager", which can be accessed from the same "Control Panel". But the easiest way to get to it is by entering the command devmgmt.msc on the Run menu.

Here we find the desired device (as a rule, it has a name like Synaptics PS / 2 Port TouchPad). Right-click to open an additional menu and select the driver update line. In the new window, we use automatic search and installation. If updated components are found, the system will notify you accordingly. But the touchpad itself could be turned off, so it's worth checking its condition.

Updating drivers using third-party utilities

Sometimes in its own base Windows data suitable drivers may not be found. The system will simply write that on this moment for the device installed current versions drivers. You can update them manually by visiting the laptop manufacturer's website, where you can find your model and download the appropriate driver.

But why do this if the update can be done in automatic mode? The optimal solution would be to install software like Driver booster... Such utilities are able to independently access the resources of equipment manufacturers on the Internet, search for and install the appropriate drivers without user intervention. The advantage of such applications is that they work exclusively directly with the websites of hardware manufacturers and software developers for its components and find the latest updates for absolutely all drivers identified in the system during the scanning process.

If all else fails

Finally, if none of the above solutions had any effect, it is possible that the malfunctioning of the touchpad is associated with the influence of some specific virus (such are also found). If the scan did not identify threats, most likely, the touch panel has physical damage, and then you cannot do without repairing or replacing it.

Conclusion

In general, the question of enabling or disabling the touchpad should not cause any particular difficulties. Using keyboard shortcuts is the easiest. As for the settings made in the system, by default, the disabling of the touchpad when using an external mouse is not set. It turns out that someone turned them on intentionally or accidentally. Maybe some software glitch influenced the change of these parameters. This is especially common when the user is his own administrator and installs specific software that requires access to change the system configuration settings.

Now we will discuss how to disable on laptop Asus touchpad. This technical device undoubtedly useful, however, with a traditional mouse, the user may sometimes need to avoid duplication of control functions. Then the question arises, the options for solving which we will now talk about.

Why do you need a touchpad

The touchpad is a special one designed for controlling a laptop without auxiliary devices such as a mouse. This is a device, let's say, for an amateur: someone adapts to cleverly moving his fingers, while someone only annoys the touchpad, as it often touches the palms when typing, and as a result, the necessary settings are reset. In addition, laptops are increasingly being used instead of stationary computers that don't need a touchpad. Below we will analyze in detail how to disable on a laptop Asus touchpad.

Non-professional ways to disable the touchpad

Standard ways to disable the touchpad

If nothing happened when you pressed the hot keys, or when you examined the "Mouse" tab in detail, then for some reason you do not have the touchpad driver installed. Elantech touchpads are used in Asus laptops. To download the required driver, you need to go to the official Asus website, select the laptop model, touchpad and operating system.

Professional ways to disable the touchpad

If you are an advanced user and you know, you can safely disable the touchpad through this program. The operation is carried out in the Internal Pointing Device section: select the appropriate value, and the question of how to disable the touchpad on Asus will never bother you anymore.

You can simply disconnect the flex cable from the touchpad by removing the top panel. But, firstly, this method is for specialists who are familiar with the internal structure of a laptop. Secondly, before doing the operation, you need to make sure that you will never need the touchpad again.

The above methods are usually quite enough to cope with this unpleasant problem on your own. But if, after reading our article, the question of how to disable the touchpad on an Asus laptop remains unresolved, contact the specialists. It is possible that your device is malfunctioning or a program malfunction has occurred.

The touchpad is a touch-sensitive device designed specifically for laptop computers, such as laptops, netbooks and more. The touchpad responds to finger pressure on its surface. It is used as a replacement (alternative) to a regular mouse. Any modern laptop is equipped with a touchpad, but, as it turned out, it is not easy to disable it on any laptop.

Why disable the touchpad?

For example, a regular mouse is connected to my laptop and it moves from one table to another - quite rarely. Therefore, I do not use the touchpad at all. Also, when working at the keyboard, accidentally touch the surface of the touchpad - the cursor on the screen begins to shake, highlight areas that do not need to be selected, etc. In this case, the best option would be complete shutdown touchpad ...

In this article I want to consider several ways how to disable the touchpad on a laptop... And so, let's get started ...

Via function keys

On most laptop models, among the function keys (F1, F2, F3, etc.), the ability to disable the touchpad is available. It is usually marked with a small rectangle (sometimes, on the button, in addition to the rectangle, there may be a hand).

Disabling the touchpad - acer aspire 5552g: press the FN + F7 buttons at the same time.

If you don't have a function button to disable the touchpad, skip to the next option. If there is - and it does not work, there may be a couple of reasons for this:

1. Lack of drivers

It is necessary to update the drivers (preferably from the official site). You can also use programs for auto-updating drivers.

2. Disable function buttons in BIOS

In some laptop models In BIOS, you can disable function keys(for example, I saw something similar in Dell Inspirion laptops). To fix this, go to BIOS (Bios login buttons: http://pcpro100.info/kak-voyti-v-bios-klavishi-vhoda/), then go to the ADVANSED section and pay attention to the Function key item (if necessary change the appropriate setting).

3. Broken keyboard

It is quite rare. Most often, some debris (crumbs) gets under the button and therefore it starts to work badly. It is enough to press it harder and the key will work. In the event of a keyboard malfunction, it usually does not work completely.

Disconnection via a button on the touchpad itself

Some laptops on the touchpad have a very small on / off button (usually located in the upper left corner). In this case, the task of disabling is reduced to a simple click on it. HP Notebook PC - Touchpad Off Button (Left, Top). HP Notebook PC - Touchpad Off Button (Left, Top).

Through the mouse settings in the Windows 7/8 control panel

1. Go to the panel Windows management, then open the "Hardware and Sound" section, then go to the mouse settings. See screenshot below.

2. If you have a “native” driver installed on the touchpad (and not the default one that Windows often installs) - you should have advanced settings. In my case, I needed to open the Dell Touchpad tab and go to advanced settings.

The touchpad is an age old feature that has long since replaced alternative mouse controls. With it, we can fully control our device, be it a laptop or a hybrid tablet. Many laptops (Acer, Asus, HP, lenovo, Dell) have problems with the touchpad. What to do if the touchpad does not work on a laptop in Windows 10? Let's take a look at 5 ways to fix this problem.

1. Re-enable the touchpad using the Fn key

One story happened to me when I turned on WiFi on my laptop and inadvertently turned off the touchpad touchpad. For a long time I was looking for the reason, not immediately realizing what had happened. Everything turned out to be simple, in laptops there is a button for additional functions called Fn from the bottom left of the keyboard. To enable any function on a laptop, the combination of the Fn and F1 ... F12 buttons is clamped. On these same F1-F12 buttons, pictures or symbols are drawn to apply the parameter. For example, to turn on the touchpad, you need to press Fn + F7, on the F7 button itself there will be an image like a touchpad. You can press all the buttons in order Fn + F1 ... F12, but remember that there is a function to turn off the display, press again on those buttons on which the screen has gone out.

On some HP notebooks, the touchpad can be turned on and off by double tapping on the edge of the touchpad itself. The asus and acer brands may have a separate button next to the touchpad. If the Touchpad still doesn't work, then move on.

2. Removing Other Mouse Drivers

There are times when you have connected a whole bunch of drivers from different devices mice and you've never deleted them. Some drivers from mouse manufacturers themselves automatically disable the Touchpad. Go to device Manager, pressing the combination of buttons Win + R and enter in the line devmgmt.msc.

Find the line pointing to mice and other pointing devices, click on the shortcut to expand the category and delete all the mouse drivers in order until the touchpad starts working on your laptop. If it does not work, try restarting the system after removing all drivers. Touchpad not working? Moving on to the next item.

3. Updating or downgrading the touchpad driver

Try updating or rolling back your touchpad driver. Go to the same device manager as described above. Find your Touchpad device, usually named after your laptop brand (Dell TouchPad, Lenovo TouchPad, Synaptics, HP TouchPad, Acer TouchPad, Asus TouchPad.) Click right click mouse on your driver and select properties. Next, click Update to see if there are any useful updates for your touchpad.

Many people have reported on Microsoft forums that the Touchpad stopped working after Windows updates 10, for this you need to choose roll back driver. If you do not have the Rollback button highlighted, then you do not have previous version driver.

In many cases, the device manager does not fire in order to enable Touchpat on a laptop. If your Touchpat still does not work on a laptop in windows 10, then go to the properties of the mouse.

• Dial mouse in line search windows and go to Mouse Settings.
• Click on Additional mouse options, in the window that opens, go Device settings, tab Touchpad or as in the picture.
• Find your Touchpad and click enable.

5. Disable touchscreen input service for hybrid notebooks

If your laptop is a hybrid (laptop and tablet in one with a touchscreen display.) Chances are that the touchscreen input service that controls stylus functionality is interfering with your touchpad.

To disable the service press win + R then type services.msc and in the list of services find TabletInputService or Tablet PC Input Service. Right click on it, then disable it. A very inconvenient solution for who uses touch screen and touchpads, but you can continue to be smart and try to remove the drivers, roll back, update and then restart the service.

If you are interested in such a question as how to disable the touchpad on a laptop, then this article is for you. A touchpad is a touchpad that is embedded in devices intended for mobile use (laptops, etc.).

The control takes place by pressing the sensitive surface. The touchpad is designed as a compact replacement for the standard mouse. Almost every model made today comes with a touch panel.

There are times when the user needs to disable the touchpad. It is noteworthy that certain models do not provide for control without a sensor.

Disabling touch controls may be necessary in different cases. For example, a user connected a regular mouse to a laptop (most people think that a regular mouse is much more convenient for controlling the interface).

The computer is rarely rearranged and usually remains at the workplace. In addition, when using the keyboard, the surface of the touchpad is often touched, which leads to unnecessary selection of text and other problems. A convenient way out of the situation is to disable the touch panel.

There are different methods for turning off the sensitive surface of your laptop, which we will consider.

What can you immediately advise? All modern computer models use function keys (located at the top of the keyboard, F1, F2, etc.).

Most laptops have the touchpad disabled. Desired button marked with a small rectangle (sometimes a hand is drawn next to the shape).

If the required key is not available, you can try another method. If it is there, but does not work, then the problem may be as follows:

1. There is no driver (it is better to install them from trusted sources, the manufacturer's website, you can use special utilities to automate updates);
2. Function keys are inactive (disabled in Computer Bios). On certain models, the buttons may be disabled. To solve the problem, open BIOS, then find "ADVANSED" and click on the "Function key" section (you can change the layout).
3. Broken buttons, keyboard. This does not happen often, usually debris just flies under the button, and it does not work. You can try to press harder or clean the keyboard.

Disabling on the touchpad itself

It happens that the touchpad of the device has a small power button (usually located at the top left). With this option, the whole process is a simple press.

Mouse options in Windows

To use this method, go to the Hardware and Sound menu, then open the mouse settings.

If your system uses the factory driver on the panel (and not the standard one that can be installed with Windows), you may have access to additional settings... Then everything is easy: just switch the checkbox to completely disable, and the touch panel will stop working.

There is a useful option that leaves the touchpad active, but it works in a mode that restricts accidental clicks fingers, palm. It works quite correctly, but, nevertheless, it does not completely eliminate touching, so it is better to turn off the panel completely.

If the required driver is not installed, then the advanced options are not available. You need to go to the manufacturer's official website and install the latest update.

It can also help if you completely remove the driver from Windows and disable programs that automatically select and download software.

Removing drivers from the system

The method is quite unusual. The whole process of uninstalling drivers is simple, but Windows system(version 7 and higher) automatically searches for and installs missing software for all connected devices.

It turns out that to prevent repeated downloads, you will have to turn off the Internet or uncheck the auto-installation of software and drivers so that Windows does not look for them in computer directories or on a Microsoft resource.

Disconnection automatic search software in Windows:

1. Find the Run button in the Start menu (it's easier to use the keyboard shortcut Win + R).
2. Add the line "gpedit.msc" (do not enter quotes) into it.
3. In the window that appears, select "Computer Configuration".
4. In order, expand the items "Administrative templates" - "System" - "Install devices" and at the end the node "Restriction on the installation of devices".
5. Click on the "Prevent installation of devices not described in other policy settings" section.
6. Check the box next to "Enable"
7. Save the changed settings and restart your PC.

Removing the driver from the OS:

1. Find the Windows Control Panel and go to it.
2. Find "equipment and sound".
3. Go to "device manager".
4. Find the menu item "Mice and other pointing devices".
5. Right-click on the device you want to remove and click on the corresponding item in the window that appears.

As a result of these operations, the remote touchpad should no longer work. The system will not be able to re-download the drivers and restore the device without user assistance.

Using the computer BIOS

First you need to go to BIOS. Access keys differ depending on the model. The ability to disable the touch panel via BIOS is not provided in all portable PCs (however, in many it is used).

To deactivate the Touchpad, go to the "ADVANCED" menu and find the inscription "Internal Pointing Device" in it. Then switch to "disabled" or "disabled" mode. Then save the created changes and restart the system.

It is noteworthy that some inexperienced users simply cover the panel with cardboard (any other convenient object). As an option, this method can be considered, but it is difficult to talk about convenience and practicality.

Every user should know how to disable the touchpad on a laptop.