A simple and quick way to do a factory reset (Hard Reset) on the ZTE Blade AF3 smartphone. Full reset or how to perform a Hard Reset on ZTE Skate Zte sensor freezes how to reboot

Now let's figure out why your Android phone does not load beyond the logo (does not turn on after the splash screen of the manufacturer or robot). Further in the text: first about the reasons and then decoding what to do in this or that case.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

If we divide all the reasons why your Android phone hangs on the logo splash screen and does not load further, then this one will

errors in the software (it is possible to fix it yourself);
problems with hardware (only in the service center).

Causes of failure and why it turns on but does not boot

⭐️⭐️⭐️⭐️⭐️ If Android does not boot on the phone or tablet when it is turned on, or the Android smartphone starts but does not go beyond the logo splash screen, then the reasons for this may be as follows:

Errors in device firmware. These include installing an unsuitable or corrupted build, out of order firmware, power failure, and other factors.
Out of memory. The system may not start or due to lack of memory. Deleting unnecessary data can also be a solution.
Memory card incompatibility. If the smartphone turns on, but does not boot to the end, try removing the memory card and try restarting the system.
Hardware problems that occur after being hit, dropped, exposed to liquid, exposed to extreme temperatures.
Damage to the power button or its cable, which "closes" the phone and it goes into a cyclic reboot, loading up to the logo and then in a circle. We encounter this from time to time and can only be diagnosed at a service center.

Before trying to troubleshoot Android, you need to understand why the system does not boot.

Recovery

If the phone shows that the charge is on, then the causes of the problem should be looked for in the Launcher Android. If the device vibrates or the screen flickers, then there is a possibility that the screen is damaged.

If you have determined that the problem is software in nature (for example, the problem arose after a firmware update), then a simple reboot will not help here. You need to reset the system through Recovery Mode or reflash the device. Let's see what to do:

While holding the power button and the volume down key (there may be other combinations, look for your model), go to Recovery Mode. If the phone, then the problems are at a deeper level, so you need to contact the service center.
Perform a factory reset by selecting "Wipe data factory".
Select "Reset" to reboot the device.

When the user's personal data and settings are deleted. If this method does not help, perform a flashing. To do this, upload the file with the appropriate firmware to the root of the memory card, insert the drive into the phone and select the "Install zip from sdcard" option in Recovery Mode.

Increase

You can deal with a software failure yourself, but how to fix hardware problems? The most reasonable option is to contact the service center for diagnostics and repair.

Extracting information from a broken Android

Even if the problem can be solved without financial investments, with a simple flashing, users have an important question - how to save the data that is stored in the phone's memory. There are no problems with the memory card: you just need to pull it out of the device. But how to save data from the internal drive? For example, pull contacts.

Increase

If you made a backup copy of the system, or at least, then it will be very easy to get contacts. All you have to do is go to the Google Contacts app to see the full list of synced contacts. If you want to transfer them to another device, it will be enough to add a Google account to it.

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? Here's what you need is a ZTE factory reset. What's this? A factory reset (hard reset) is an operation that deletes all data (including settings, apps, calendars, pictures, etc.) on the ZTE Blade and returns the default settings that make your device look like it came straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to run faster when there are some operating system difficulties. Here is how to reset ZTE.

Soft factory reset and hard factory reset are two methods that you can use to factory reset your ZTE and reset your phone to be like new. Perhaps you want to reset your phone security because you forgot your screen lock password. Or you want to restore factory settings by hard resetting your phone. Before rebooting your Zmax 2, I suggest you first try soft resetting your ZTE. Wallpaper for Android.

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Press ZTE main menu.

2. Tap "Settings" > "Privacy".

3. Click Factory Data Reset.

4. Touch Reset Phone. Check remove SD card if you want to remove memory card.

5. Click Erase All.

Wait a few seconds, your phone will automatically restart and the ZTE reset will be completed. If you see that your problem is still not fixed, you can try hard resetting your ZTE phone.

We do a hard reset ZTE to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then return it.

3. Press the volume up and power button at the same time until it vibrates, then release the power button, the ZTE recovery screen will appear.

4. A couple of options will appear on the screen, select "Factory reset" (Wipe data / Factory reset) using the volume keys and confirm the selection with the power (on) button.

5. Then on the next screen, select - delete all user data (delete all user data) using the volume button, press the power button to confirm.

6. All data and cache of ZTE will be erased automatically and a screen with reboot system, factory reset will appear.

8. Your phone will turn off and restart.

ZTE hard reset completed. So wait a few minutes. And then you will see that your smartphone works better than before.

All music, videos, files and folders will be deleted automatically.
Your entire contact list and SMS-MMS call or chat history will be automatically formatted from your smartphone.
This means that all information will be deleted from your phones that you have saved in your phone before.
So I suggest you before you reset ZTE phone Zmax 2, please back up your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about ZTE hard reset or any tips or tricks to improve Smartphone in main ZTE smartphones, please feel free to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course you are important to us.

Option 1

1. First, the gadget must be turned off
2. Press for a while Volume Down and Food
3. When the reset menu appears on the display, stop pressing the buttons
4. Using the button Volume Down select Clear eMMC and confirm by pressing the power button

Option 2

1. Turn off your phone first
2. Click Volume Up + Food for a little
3. Stop pressing the buttons when the Android image or logo appears on the screen ZTE
4. Clamp Food to enter Recovery Mode
5. In the menu that appears, select Wipe Data / Factory Reset using the buttons Volume Control and confirm by pressing the button power

6. Select Yes--delete all user data by pressing the keys Volume Control and confirm the choice by pressing the button power

7. In conclusion, to complete the reset process and reboot, select reboot system now

Option 3

1. Go to Phone Settings

2. Choose Recovery and reset

3. After click on Reset settings

4. Click Reset and agree to the destruction of personal data
5. The reset process is completed after the phone restarts

Option 4

1. In the dialer, enter *983*22387# and press the Call button
2. In the menu, select Erase Everything
3. After the phone restarts, the reset will complete

ZTE Blade GF3 factory reset

Attention!

Videos and images for some activities may not exactly match your particular phone model.
After performing a hard reset, all your personal applications and data that are in memory will be deleted.
For a factory reset to be successful, the battery needs to be about 80% charged.

Often, technology fails. Most often, the reason lies not in the hardware, but in the device system itself. The reasons for this can be completely different: accidental deletion of system files, virus infection, or frequent critical errors.

In order not to reflash the phone's operating system, you can apply the so-called Hard Reset or reset to factory settings. After that, all damaged or lost files will be restored.

Each phone is initially built-in software that makes it possible to roll back user settings to their original form. At the same time, be prepared that all data will be deleted from your ZTE phone: photos, videos, audio, and even contacts (if they are stored in the phone’s memory). The data stored on the SIM card and the built-in memory card will remain intact.

Therefore, be sure to back up the information stored on your phone. This can be done both from the device itself and by connecting it to a computer.

Unlike flashing, resetting a ZTE- router is absolutely safe and will not be regarded as software hacking if you suddenly decide to return a defective device under warranty.

There are several ways to reset your phone to factory settings. Depending on whether the reason for your decision is a malfunction of ZTE or as a preventive measure, one or another method may not work. Consider the most popular.

Android System Recovery

Any ZTE phone running on the Android operating system can be returned to its original settings using the universal method. To do this, the battery of the device must be charged at least 30%. After that, follow these steps:

power off your device;
hold the following key combination at the same time: power on / off, volume up;
a screen with an Android icon will appear, a list of available commands, data about your ZTE phone (firmware version);
the list is controlled by the volume down and volume up keys, confirm the selection - the power button;
go down the list and select “wipe data / factory reset” - full reset to factory settings;
confirm the action, wait for the operation to complete;
select the first line from the "reboot system now" list.

After that, the phone will reboot, and all settings will be reset to factory settings.

Telephone code

If the previous method did not work or the phone does not have recovery for some reason (this may be due to a virus or root rights), then use the following method to reset ZTE to factory settings:

remove the SIM card from the device (if you have one);
then launch the dialing window and click "emergency call";
enter the following command: *983*987#;
after that, the device will ask you for permission to completely delete data (erase everything);
confirm your intentions and wait for the operation to complete.

ClockworkMod

This method requires a third-party utility to restore phone data to factory settings - ClockworkMod Recovery. It is distributed absolutely free of charge, and you can download it from the official Android application store.

In terms of its functionality, ClockworkMod Recovery is similar to the built-in Android System Recovery, but it has a number of advantages. For example, the ability to back up data to an SD card and run the firmware distribution in safe mode.

After installation, it is automatically the basic recovery software and starts in the same way: using the volume up and power on / off keys of the phone.

Standard System Restore

This method is only suitable if the device is working.

go to the settings menu of your android;
scroll through the list and find the line "reset and restore data"
two options for Hard Reset will be available here: factory reset and complete removal of all DRM certificates;
here you can also set up data backup, this will require a Google account;
after changing the necessary parameters, select full data recovery and wait for the procedure to end.

As you can see, resetting to factory settings is quite simple on any ZTE phone models. Most users will be helped by the very first method, as for the more advanced ones, it is recommended to download a special third-party recovery application.

Found a typo? Select the text and press Ctrl + Enter

When a smartphone begins to take on a life of its own, it becomes quite difficult to operate it. Using the example of gadgets from ZTE, consider the following question - why does zte randomly reboot periodically? It's no secret that in most cases it concerns system file errors, there are exceptions that also require a description. Let's try to deal with such a problem in the format of this article.

To begin with, several possible events that preceded such a breakdown:

The device was dropped from a height onto a hard surface.
Moisture, water or tea, for example, got under the lid.
You tried to flash the device yourself.
The problem appeared after the OS update.
Old battery.

All this can adversely affect the technique, including forcing the device to independently activate the reboot. Now about each point in more detail.

Falls and high humidity

Number one on our list is water intrusion into the hull. When this happens, the elements of the motherboard and processor are oxidized, and this can be the cause of many problems. Self-switching on, off, and generally strange behavior of the phone, users observe most often.

In fact, everything is not so simple, and in order to identify a specific breakdown and draw up a repair plan, electronics diagnostics will be required.

Falls and bumps are another popular item. Having fallen on a hard surface, the gadget can be severely damaged not only externally, but also internally. Dropped wires, cracked circuits, processor failure, only open a list of possible malfunctions. As in the case of water, you can’t do without checking on the equipment, so call the service center right away.

When the battery of the device is not the first year, it is best to change it, it does not hold a charge well, and after a while it can become the main factor in restarting the gadget without your participation. Finding out that this particular part has become defective is easy, download one of the free applications that show all the information on the components. And how to change it yourself, read the next section of the article.

How to change ZTE battery?

There is nothing difficult in this process, at least for those users who have a set of tools for mobile devices.

Carefully, so as not to break, separate the back of the case, do not jerk sharply so as not to break the rear button cable, if any.
Now unscrew the screws that hold the plastic protection and put it aside.
The battery cables should fit to the bottom of the board, and on some models also to the cameras of the device, pull them out.
The part can now be removed from the case, take your time, it can be fixed with double-sided tape.
If so, heat it with a hair dryer, you can use it at home, it doesn't matter. To melt the adhesive base, a high temperature is not needed.
Pry the battery by the corner, if it lends itself to gradually lifting it up, take it out without damaging the circuits and other elements.
If you do everything according to the manufacturer's idea, then during the installation process you also need to place double-sided tape on the landing site, having cleaned the place from the old one in advance.

Well, in the end, repeat the entire instruction in reverse order, sequentially for each of the points, without missing any wires or power contacts, and then check the flagship.