What to do if the message “Commands No. Android writes "No command" - what to do Lying android with a red triangle what to do

The phone "Fly Phoenix 2" was discharged at night, I went to bed, I wake up this morning and put my device on charge, it "came to life" on its own, after which it gives the error "no command", after which I wanted to make a recovery through the script on the SD card , but I had it as the main memory, I took it out and put a card with a script, after that it stopped turning on at all, I'm sitting charging, waiting for answers. June 6

I have a wecsler taBMW 10q tablet showing that there is no connection, I set it to reboot and the virus got out and recovered. Acquaintance and napIvanovich no team June 3

I recently appropriated his Explay phone from my brother. Worked properly. I walk and walk, I decided to get the phone out of my pocket, slipped out of my hands, fell, insert the battery, turn it on, on the screen there is a picture with a lying bot, which symbolizes android, it has an open lid, a triangle next to the lid, and in the triangle "!" I was frightened, the phone is expensive, and my mother will kill, with a fright, she began to poke anywhere. Then I began to solve the problem in this way - open the lid > carefully pull out the battery > insert the battery > insert the lid > hold down the power key. Hooray! The phone turned on as always. This happened to me 5 times. 5 May

Tel Filipok W6610, everything works except reset. I make backgammon, the corpse of Andryukha is displayed with the inscription there is no command. Tried to remove unnecessary junk manually. After a reboot, everything returns to its place. And the new account is not saved... April 30

Tel. Samsung Galaxy2 recumbent android command no, gave it for repair, reflashed, nothing happened. Gave in. Tell me, please, what can it be? Thank you. April 6

I have Explay Rio Play. Did a reset. It seems that everything was done as it should, but when the phone turned off, the inscription "No command" came out. I've tried everything, but for some reason it doesn't work. Help please ((March 31

I have a Tesla Neon I7.0 It happened in July 2016. I put the tablet on charge for the night. I wake up and there is no tablet. It turns out he is on the floor with the charger connected and writes. I was afraid that my dad would scold me and I went for a walk. Then he came home and turned off the tablet and then turned it on and it all worked! He must have fallen. Try it will help you March 25

Yesterday everything was fine, in the morning I tried to rearrange the alarm clock, there was no connection to the alarm clock, I decided to restart it, restarted it and when the phone turns on there is no command written. March 14th

The problem is the same does not turn on the droid lies upside down once got up but fell again. Just another plus for my virus, he ruined all my gadgets. The laptop and the other phone are still breathing, trying to fight, and lenovo a2010 immediately became a bot. There is and my fault has established the root of the right, just the memory is always zero. Now completely forgetful. Lying around. The option of firmware via PC DO NOT OFFER. Thank you. In advance. March, 3rd

Hello. I have tel. BV6000. The problem arose after updating p. o to 7.0-anroid. Applications have crashed. I'm trying to enter the mode menu to reset everything to the old version of android-6.0, my lying android with an exclamation mark lights up. Help advice please. 2nd of March

I received a software update notification, I turned on the update, the update passed, after that the update started in the background, after that an update error appeared, after that the phone rebooted when it was turned on, the command no and the lying droid appeared! familiar, help! February 16

on the samsung galaxy s6 I can’t turn on the firmware mode (I press the Home button, the sound down, and the on button at the same time) and the splash screen just loads (Samsung galaxy s6) and nothing else happens, how can I turn on the firmware mode differently? The 25th of January

The firmware on the DEXP ixion E145 has flown off, the recovery starts android lies with an exclamation mark, nothing helps the firmware is not installed, it writes an error, will the drivers help before the firmware and who has it? all actions without access to a computer are needed. January 6

Ordered on Ali phone Original Oukitel K4000 Pro MTK6735P During the turn-on after 5 minutes, it started to turn itself off and turn on, the seller advised resetting to factory settings. Done, now when you turn on the screen there is no command ((

What to do if Android lies with an exclamation point? In the article, we will consider the main causes of device malfunction and ways to solve it.

The first version of the Android operating system appeared in 2008. The presence of a large number of functions, ease of use and low price compared to analogues made it accessible to a wide range of users. It is not surprising that issues related to the long and uninterrupted operation of devices with this operating system are very relevant.

An android icon with an exclamation point on the screen indicates a malfunction in the device software. It can be associated either with the installation of an unlicensed program, or with a virus infection.

Photo: Android lies with an exclamation mark

Usually, a user may encounter such a problem when turning on (rebooting) a smartphone or tablet. If this happened to you, what can you do?

The first thing that is offered in such cases is this. To do this, you need to turn off the device, if necessary, recharge it to 100% and turn it on in the menu for developers. Since the key combination depends on the smartphone or tablet model, we recommend that you refer to the instructions. In the standard case, this can be done by simultaneously holding the power, volume down and (or) Home buttons.

In some cases, the smartphone after this action can restore the factory settings automatically, but sometimes it needs to be done manually. Remember that in this state only the buttons work (you will not be able to use the sensor). To move up and down through the menu items, you will have to use the volume keys. In the list, you need to select the “Wipe data / Factory reset” position with the power button or Home button, which means “delete data / reset settings” and confirm your choice in the next window that opens.

The main downside to this action is to remove everything from your device that is not factory settings. And these are contacts, messages, photos, audio and video recordings, and programs you have installed. Therefore, if you do not want the safety of your data to depend entirely on one electronic device, make backup copies in advance.

If you are not sure that you can handle this task on your own, it is better to contact a specialist, because any mistake can lead to disastrous consequences.

If the "USB debugging" function is enabled in the android settings, you can reflash the device,.

Photo: USB Debugging

Photo: USB Debugging

We unpack the already downloaded folder with the program on drive C. Check for the downloaded drivers for your smartphone and install if they are not. Turn off the device, use the key combination to enter it into the firmware mode and use the cord to connect it to the computer. Then follow the instructions of the program.

If you have not connected the ability to debug your smartphone via a USB cable, consider another option to reinstall the software using the device itself and a flash drive. To do this, you will have to return to the menu described earlier by selecting the option to restore using SD.

Photo: Flashing Android

In both cases, at the end, you will have to reset the system to the original settings again.

To summarize: Android lies with an exclamation mark - this is not an easy problem, but it can be solved. If you don't want to deal with it often, be careful what you download to your device. Be sure to install.

You can fix the problem either on your own or with the help of a specialist by resetting the settings or reinstalling the software.

Dear readers! If you have any questions or comments on the topic of the article, please leave them below.

If you have ever tried to flash or or an Android tablet on your own, you have probably come across the concept of “Recovery”. Today we will talk in detail about what this thing is, why it is needed at all, and of course, how to enter it.

What is Recovery

Recovery mode is a special boot mode for android devices that allows you to do a complete reset of the operating system settings, reflash the device, backup the entire system or its individual partitions (just like restoring these partitions later) and some other things. At the same time, for this mode to work, the performance of the operating system itself is completely optional. That is why the recovery menu is often accessed when the device is no longer working in normal mode. And that is why this mode is called "recovery" (from the English. "Recovery").

How to enter Recovery

To boot recovery, the device's hardware buttons are usually used. The most common combinations are:

However, some manufacturers may come up with "something like that", so you have to look and experiment.

If everything is done correctly, a lying robot will appear on the device screen, on top of which there will be a menu with commands.

Another way to download recovery is special applications, with which you can reboot your smartphone or tablet into recovery mode directly from the operating system itself (for example, Reboot menu). However, it is worth bearing in mind that these applications require presence.

Navigation in recovery mode is done mainly with the volume buttons, and selection with the power button. There are also devices where only the volume down button is used for navigation, and the volume up button is used to confirm the selection.

To all of the above, one important detail must be added. The functionality of the recovery mode itself is by no means universal, and can be quite different depending on the device. Particularly distinguished in this sense are "noname" tablets from China and some B-brands, in recovery of which there is no list of commands at all.

Mobile operating systems are not as reliable as it might seem. Error "No command" Android is a clear example of this. A fallen brand with a red triangle completely paralyzes the smartphone and nothing can be done with it.

Causes of the "No Command" bug

The reasons for the bug are quite critical damage OS or internal modules. Only something very serious can cause the operating system to crash. Sometimes users themselves are to blame, as they tried to reinstall the OS using files with dubious firmware. It may be due to a marriage or a normal technical breakdown during the operation of the device.

"No command" error in Android

How to fix "No command" error

Before doing the following, you should apply all the simplest steps - reboot with removing the battery, memory cards and SIM cards.

Method number 1 - reset to factory settings

When turning the phone into a "brick", you can try to restore the manufacturer's settings. There are many options for these actions, but we need an option with a dead smartphone. There is a special command designed to remove such bugs.

Method number 2 - Flashing

Although this is an extreme, but effective solution, when you see that your Android is lying with an exclamation mark, and Hard Reset does not help. If you have not done such OS changes before, then trust flashing phone to someone more experienced. You can try to install the latest release OS or vice versa to roll back. If something went wrong after reinstallation change version and the source of your software. There is really a lot of low-quality content right now.

In dead phones, the firmware file is uploaded to the phone's memory using a USB cable through a computer, followed by activation of the installation. There is enough information on the web about this.

Breaking

All devices are broken. In such cases, you need to either try to identify the cause yourself or contact the service center. What can be checked: removable memory cards, closed contacts on connectors, battery, correct assembly of all parts, moisture. If you suspect serious defects, you should seek the advice of specialists.

As for the battery, it is worth mentioning that sometimes it is enough just to pull it out and insert it. There are references to solutions through its complete replacement, when the old one has already exhausted its working resources. If the device gets wet, it is better to buy a new battery immediately.

Conclusion

From the above, one conclusion should be drawn - the “No command” error on Android is written only during serious problems, so formatting the phone, flashing and repairing are the main methods of recovery. I hope you understand what to do with the “No Command” problem in smartphones and tablets. Huge Request- if you have another solution, describe it in the comments.

There are quite a few problems associated with the operation of smartphones, tablets and other devices on which the Android system is installed. One of the most common and at the same time difficult is the problem in which a notification is displayed on the device screen about the absence of some command. What should the user do in such a situation?

Possible reasons

There can be quite a few reasons for this behavior of the device, which, nevertheless, does not complicate the process of solving it.

A whole list of manipulations with a smartphone can act as factors contributing to the appearance of such an error. These include:

Smartphone software or OS update that did not complete properly;
during which the problem occurred;
Memory corruption and other technical problems of the smartphone caused by falling, flooding and other characteristic incidents.

By itself, the cause of the breakdown is unlikely to help solve the problem, but it will help to avoid the occurrence of similar problems in the future.

Solution

When a command error appears no android what should the user do in such a situation? There is no need to find out the exact cause that entailed such unpleasant consequences. It is enough just or, in some cases, to reflash the phone. The reset procedure is quite simple and is very similarly implemented in all modern devices. To execute it you should:

When you turn on the smartphone, hold down the volume button, after which the menu will open
In it, select the WIPE data factory item, after which a reset will occur.
Sometimes, during the procedure, the smartphone may "ask" what to do with the user's data. In most cases, they should be removed for the device to work correctly.

The flashing process is somewhat simpler than resetting, however, it also has its own pitfalls. These include the need to fully charge the smartphone in order to avoid turning it off during manipulations. As a rule, the firmware update is performed by standard tools supplied either with the product on a disk, or presented on the device manufacturer's website.

Possible reasons

There can be quite a few reasons for this behavior of the device, which, nevertheless, does not complicate the process of solving it.

A whole list of manipulations with a smartphone can act as factors contributing to the appearance of such an error. These include:

Smartphone software or OS update that did not complete properly;
during which the problem occurred;
Memory corruption and other technical problems of the smartphone caused by falling, flooding and other characteristic incidents.

By itself, the cause of the breakdown is unlikely to help solve the problem, but it will help to avoid the occurrence of similar problems in the future.

Solution

When a command error appears no android what should the user do in such a situation? There is no need to find out the exact reason that entailed such unpleasant consequences. It is enough just or, in some cases, to reflash the phone. The reset procedure is quite simple and is very similarly implemented in all modern devices. To execute it you should:

When you turn on the smartphone, hold down the volume button, after which the menu will open
In it, select the WIPE data factory item, after which a reset will occur.
Sometimes, during the procedure, the smartphone may "ask" what to do with the user's data. In most cases, they should be removed for the device to work correctly.

The flashing process is somewhat simpler than resetting, however, it also has its own pitfalls. These include the need to fully charge the smartphone in order to avoid turning it off during manipulations. As a rule, updating the firmware is carried out using standard tools, either supplied with the product on a disk, or presented on the website of the device manufacturer.

If the phone does not turn on, for example, after flashing, you can try the following steps:

Turn off the device by pressing the power button for a little over 10 seconds
Press Volume Down + Power, we get into Fastboot mode
Select the Recovery mode option with the volume control buttons, confirm the selection with the power button
Android will appear with an exclamation point. Then press the Power button, and then press the Volume Up
Select wipe data/factory reset option
Select reboot system now

If the Android robot lies with an exclamation mark, it means that most likely you have conducted an unsuccessful experiment with the device software. Perhaps you have installed some broken the program that led to fall android))

Do a hard reset by selecting Wipe data / factory resetquot ; in the engineering menu. Depending on the model of your smartphone, you can enter the engineering menu as follows:

try the combination home, power and volume down key.
if the home touch, most likely a combination of buttons power and volume down.

The combination should be pinched with your fingers and held until the service menu appears on the screen. Then select the corresponding menu item by moving in nm by pressing the volume buttons.

After you select Wipe data / factory resetquot ;, several lines will appear on the screen and the question Delete all data from your device? Click yesquot ;. Now the device's memory is being cleared. After that, the device will reboot. If this does not happen automatically, you need to select the menu item rebootsystemnow. After the reboot, the device, in theory, should work normally again.

But the price for this is the loss of all data, and ALL of them - including all contacts, photos, sms and all applications ever downloaded.

For this reason, you should always regularly synchronize your smartphone with Google through your account, since in this way you can restore almost all data.

If rebooting through the engineering menu did not help, only a complete software replacement will help. It can be done by flashing by connecting a smartphone via USB to a computer or using a flash card through the engineering menu. Remember that flashing is a risky business. It is imperative to follow all the instructions exactly, otherwise your device may die finally. In any case, be sure to raise all the information on the firmware on the Internet so as not to make mistakes. Good luck to you!

Make a flashing, it only helped me

Perhaps the tablet spontaneously entered the Recavery mode or the engineering menu. If God has mercy and after rebooting, a normal download will take place, then some application can cause such an incident (sometimes it occurs when you get root rights) If again there is interference, then it's bad business with the firmware, only in the service for flashing.

You may have done something with the software on your tablet before. Most likely, they installed some kind of buggy program and this led to such unpleasant results. The first thing you can try to do yourself is to reset the tablet to factory settings. If this does not help, then reflash it. If you cannot do it yourself, then take it to a service center. They will definitely help you there.

This happens not only with tablets, but also with smartphones.

Something happened to your software.

Try to reset all settings on the tablet to factory settings (Hard reset).

You can read more about hard reset here.

In most cases, this will help you.

But like everything else, AT YOUR OWN RISK!>

After an unsuccessful attempt to make an android backup with a built-in robot application on its side, with an exclamation mark and a ripped belly! On the Internet, just play with the volume rocker and the power button to enter the menu.

The solution was to remove the battery for a couple of minutes, and insert it again. And everything WORKS!!! The system check did not find any failures. All settings, except for the clock, profiles and files, are in place!

But like everything else, AT YOUR OWN RISK!>

The recumbent anroid blinks, under the inscription no commands not one so-called reset by commands POWER home +, - there is no response, it just turns off, the screen lights up, as when loading and again returns to dead man does not turn off

Before that, three keys were simultaneously pressed Homequot ;, Volume - and the off button? It looks like you have entered the Recovery Menu of the tablet. There should be an item Reboot or Rebooting - tap on it. Or you can do a hard reset in the same place, while all the settings will return to the factory settings. And for the future, I recommend that you go to this forum, where you can find information on the tablet.

You have a crash, an error in the program. To get started, press the Searchquot ;, then Rebootquot ;, reboot. Usually in such cases a reboot helps. If this does not help, you need to contact the experts. Might need a flashing.

What to do if Android lies with an exclamation point? In the article, we will consider the main causes of device malfunction and ways to solve it.

Photo: Android lies with an exclamation mark

Usually, a user may encounter such a problem when turning on (rebooting) a smartphone or tablet. If this happened to you, what can you do?

The first thing that is offered in such cases is. To do this, you need to turn off the device, if necessary, recharge it to 100% and turn it on in the menu for developers. Since the key combination depends on the smartphone or tablet model, we recommend that you refer to the instructions. In the standard case, this can be done by simultaneously holding the power, volume down and (or) Home buttons.

Photo: Hard reset menu

If you are not sure that you can handle this task on your own, it is better to contact a specialist, because any mistake can lead to disastrous consequences.

If the "USB debugging" function is enabled in the android settings, you can reflash the device,.

Photo: USB Debugging

Photo: USB Debugging

Photo: Flashing Android

In both cases, at the end, you will have to reset the system to the original settings again.

Let's summarize: Android lies with an exclamation mark - this is not an easy problem, but it can be solved. If you don't want to deal with it often, be careful what you download to your device. Be sure to install .

You can fix the problem either on your own or with the help of a specialist by resetting the settings or reinstalling the software.

Dear readers! If you have any questions or comments on the topic of the article, please leave them below.

Mobile operating systems are not as reliable as it might seem. The “No command” error in Android is a clear example of this. A fallen brand with a red triangle completely paralyzes the smartphone and nothing can be done with it.

Causes of the bug

The causes of the bug are quite critical damage to the OS or internal modules. Only something very serious can cause the operating system to crash. Sometimes users themselves are to blame, as they tried to reinstall the OS using files with dubious firmware. It may be due to a marriage or a normal technical breakdown during the operation of the device.

"No command" error in Android

How to Fix No Command Error

Before doing the following, you should apply all the simplest steps - reboot with removing the battery, memory cards and SIM cards.

Method number 1 - reset to factory settings

Method number 2 - Flashing

Although this is an extreme, but effective solution, when you see that your Android is lying with an exclamation mark, and Hard Reset does not help. If you have not done such OS changes before, then entrust the flashing of the phone to someone more experienced. You can try to install the latest release OS or vice versa to roll back. If something went wrong after reinstallation, change the version and source of your software. There is really a lot of low-quality content right now.

In dead phones, the firmware file is uploaded to the phone's memory using a USB cable through a computer, followed by activation of the installation. There is enough information on the web about this.

Breaking

As for the battery, it is worth mentioning that sometimes it is enough just to pull it out and insert it. There are references to solutions through its complete replacement, when the old one has already exhausted its working resources. If the device gets wet, it is better to buy a new battery immediately.

Conclusion

From the above, one conclusion should be drawn - the “No command” error on Android is written only during serious problems, so formatting the phone, flashing and repairing are the main methods of recovery. I hope you understand what to do with the “No Command” problem in smartphones and tablets. A huge request - if you have another solution, describe it in the comments.

What to do if the message “Commands No. Android writes "No command" - what to do Lying android with a red triangle what to do

What is Recovery

How to enter Recovery

Causes of the "No Command" bug

How to fix "No command" error

Method number 1 - reset to factory settings

Method number 2 - Flashing

Breaking

More Solutions

Conclusion

Possible reasons

Solution

Possible reasons

Solution

Causes of the bug

How to Fix No Command Error

Method number 1 - reset to factory settings

Method number 2 - Flashing

Breaking

More Solutions

Conclusion