How to set up a mobile hot spot. We create an access point on a PC using the function. Gadgets don't connect to hotspot. What to do

Before setting up a wireless access point, make sure that there is an Internet connection and that the Wi-Fi adapter is working.

How to enable wireless hotspot in Windows 10 settings

To set up a wireless hotspot in Windows 10, you can do without special programs and entering commands into the console. It is enough to make a couple of clicks in the "Parameters".

Click in the "Start" menu on the gear "Settings" → "Network and Internet" → "Mobile hotspot".

In "Internet Connection Sharing", specify the connection through which the computer accesses the Internet. For example Ethernet.

Under the network data, click on "Change".
In the form that opens, specify the network name and password - their users will enter them to connect. Save them.

At the top of the page, turn on "Allow other devices to use my internet connection."

Ready. By network name and password, you can connect up to eight devices to the hotspot. And you can turn off the distribution of the Internet in the same place where the wireless connection is turned off - in the "Network" window on the taskbar.

And a little life hack: so that the hot spot does not work idle, you can run it remotely from another device. The function is activated in the same settings of the access point and works if you turn on Bluetooth on both devices and connect them to each other.

What to do if the mobile hotspot on Windows 10 won't turn on

And this is where the fun part begins. Setting up a wireless access point in the parameters is very simple in theory, but in practice, the system gives one of the errors to many users.

The author, for example, got “I can't set up a mobile hotspot. Turn on Wi-Fi. " Judging by queries on Google and topics on the forums, this problem is common and its cause may lie in the driver of the Wi-Fi adapter.

There are several solutions to the problem.

Reset settings: "Network and Internet" → "Status" → "Reset network".
Remove the Wi-Fi driver and download a new one from the manufacturer's website. If the manufacturer hasn't released drivers for Windows 10 (as is the case with the author's five-year-old laptop), you can download the driver for Windows 8.
See if the Microsoft virtual adapter is listed in Device Manager and enable it.
Spit on all this and set up a hot spot in.

How to set up a wireless hotspot via Windows 10 Command Prompt

If the easy way didn't work, then this one will most likely help distribute the Internet.

Click right click mouse on the "Start" button, in the menu that opens, select "Command line (administrator)" and one by one enter the following commands into it.
- netsh wlan show drivers- to find out if the Wi-Fi device supports sharing. In the text that appears in the window, find the line "Hosted network support" and make sure that it says "Yes". If “No,” try reinstalling or rolling back the driver and try again.

netsh wlan set hostednetwork mode = allow ssid = Stacy key = 4419E1z #- to create a hot spot. Only instead of Stacy and 4419E1z # enter your network name and password.
netsh wlan start hostednetwork- to start the wireless access point.

Right-click on the "Start" button again, select " Network connections"→ right click on an active connection →" Properties ".

Open "Access", check the box "Allow other network users to use the Internet connection this computer". And in the field below, select the ending with the number "Local Area Connection ...".

That's it, now you can connect your device to the hotspot, just like to any Wi-Fi sources: select your network in the list of available ones, enter the password and use it.

You can turn off the distribution of the Internet using the netsh wlan stop hostednetwork command.

Finally, Windows 10 has a standard and simple function, which allows you to distribute the Internet via Wi-Fi from a laptop or computer. This function is called "Mobile Hotspot". This is a separate tab in the parameters, where you can launch a Wi-Fi access point in just a few clicks. All you need to do is give a name and wifi password the network that the laptop will distribute, and specify the Internet connection from which you want to distribute the Internet to your devices.

Now, in order to distribute the Internet via Wi-Fi in Windows 10, you do not need to perform complex configuration of the access point via command line, as I wrote in the article How to distribute the Internet via Wi-Fi from a laptop in Windows 10, or use third party programs... It is enough to configure the "Mobile Hotspot" and activate the wireless hotspot function. You will also be interested in the 8 hidden features of Windows 10.

So, in order to turn on the access point, click on the "Start" button on the taskbar and click on the "Settings" icon or press the key combination + I

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the "Mobile hotspot" tab

In the "Mobile hotspot" tab that opens, we see that the wireless network name (SSID) and password are assigned automatically, but you can change the network name and password by clicking on the "Change" button

In the "Change network information" window, change the network name and network password(at least 8 characters), click the "Save" button

Next, in the "Internet connection sharing" drop-down list, select the connection through which you have an Internet connection, it does not have to be "Ethernet", it can be wireless network or the name of your 3G / 4G modem. See also How to see the password hidden by asterisks in the browser and How to register with Instagram from a computer.

For start mobile point access, click on the switch next to "Allow the use of my Internet connection on other devices."

Now that the mobile hotspot is configured and turned on, any Wi-Fi enabled devices can connect to it. 8 devices can be connected to the access point at the same time. Information about connected devices will be displayed in the same window.

I decided to connect my 3G USB modem to my laptop and try to launch the "Mobile Hotspot". After all, many people use the Internet precisely through 3G / 4G modems, and want to distribute it to their mobile devices, without buying a router. This method will work fine for you.

This is how it will look for you

Mobile Hotspot Management

You can disable the function itself and stop distributing the Internet by simply setting the switch to the "Off" position. in the settings window.

Everything is very convenient and easy to set up. You will also be interested in TOP jokes from Google and Yandex developers and a Temporary mailbox for registration.

Possible problems when distributing the Internet in Windows 10 through a mobile hotspot, and their solutions

As I wrote above, in the process of starting the access point, you may encounter various errors. When I tried to launch a mobile hotspot on desktop computer with TP-LINK adapter TL-WN720NR also encountered the error "Unable to configure mobile hotspot. Turn on Wi-Fi". What I didn’t do, I couldn’t run virtual network... At the same time, on the same computer, with this adapter, it is possible to start the distribution of the Internet through the command line without any problems.

Error "Unable to set up mobile hotspot. Turn on Wi-Fi"

This error looks like this:

According to my observations, this error appears due to problems in the driver Wi-Fi adapter, or due to the fact that it is the virtual adapter that is disabled. At the same time, as I wrote above, I could not defeat this error on one computer. Although, there in the device manager were all required drivers and they worked. Even if your Wi-Fi is turned off with a button, then the mobile hotspot starts up smoothly.

If you think logically, then the problem is definitely not in the absence of a driver. wireless adapter, because if there were no driver, then the "Mobile hotspot" tab would not exist at all. In the same way as the "Wi-Fi" tabs in the settings.

Look for the problem in the device manager. First, try updating your Wi-Fi adapter driver. Reinstall it by downloading it from the manufacturer's website. If that doesn't work, then go to Device Manager and check if there is a "Microsoft Wi-Fi Direct Virtual Adapter". It can be with a number at the end. It is through this adapter that the laptop distributes Wi-Fi in this way.

To do this, you first need to enable the display hidden devices... If there is an icon next to the Microsoft Wi-Fi Direct Virtual Adapter, right-click on it and select Activate.

A few more solutions

1 Error "Unable to share this connection to the Internet, since there is no connection to the mobile network ".

I got this error when I tried to start the distribution of the Internet when connected via a 3G modem. Everything was resolved simply by restarting the Internet connection. Make sure the Internet on your computer is working. You can restart your computer, connect to the Internet, and start over.

2 Error: "The mobile hotspot could not be configured because the computer does not have an Ethernet, Wi-Fi, or cellular connection."

You will most likely see this error only when your computer is not really connected to the Internet. Check the connection.

This error also appears when your Internet is connected via PPPoE (high-speed connection). The mobile hotspot does not see such internet connections.

3 Devices do not connect to the running Wi-Fi networks... I have not encountered such a problem, but everything can be. Most often, the connection is blocked by antiviruses and firewalls. Disable them and check the network connection.

Finally, Windows 10 has a standard and simple function that allows you to distribute the Internet via Wi-Fi from a laptop or computer. This function is called "Mobile Hotspot". This is a separate tab in the parameters, where you can launch a Wi-Fi access point in just a few clicks. All you need to do is set the name and password of the Wi-Fi network that the laptop will distribute, and specify the Internet connection from which you want to distribute the Internet to your devices.

Now, in order to distribute the Internet over Wi-Fi in Windows 10, you do not need to perform complex configuration of the access point through the command line, as I wrote in the article How to distribute the Internet over Wi-Fi from a laptop in Windows 10, or use third-party programs. It is enough to configure the "Mobile Hotspot" and activate the wireless hotspot function. You will also be interested in the 8 hidden features of Windows 10.

So, in order to turn on the access point, click on the "Start" button on the taskbar and click on the "Settings" icon or press the key combination + I

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the "Mobile hotspot" tab

In the "Change network information" window, change the network name and network password (at least 8 characters), click the "Save" button

Next, in the "Internet connection sharing" drop-down list, select the connection through which you have an Internet connection, it does not have to be "Ethernet", it can be a wireless network or the name of your 3G / 4G modem. See also How to see the password hidden by asterisks in the browser and How to register with Instagram from a computer.

To launch a mobile hotspot, click on the switch next to the item "Allow the use of my Internet connection on other devices."

This is how it will look for you

Mobile Hotspot Management

You can disable the function itself and stop distributing the Internet by simply setting the switch to the "Off" position. in the settings window.

Everything is very convenient and easy to set up. You will also be interested in TOP jokes from Google and Yandex developers and a Temporary mailbox for registration.

Possible problems when distributing the Internet in Windows 10 through a mobile hotspot, and their solutions

As I wrote above, in the process of starting the access point, you may encounter various errors. When I tried to start a mobile hotspot on a stationary computer with a TP-LINK TL-WN720NR adapter, I also encountered the error "Cannot set up mobile hotspot. Turn on Wi-Fi". What I just didn’t manage to start the virtual network. At the same time, on the same computer, with this adapter, it is possible to launch the distribution of the Internet through the command line without any problems.

Error "Unable to set up mobile hotspot. Turn on Wi-Fi"

This error looks like this:

According to my observations, this error appears due to problems in the Wi-Fi adapter driver, or due to the fact that it is the virtual adapter that is disabled. At the same time, as I wrote above, I could not defeat this error on one computer. Although, there were all the necessary drivers in the device manager, and they worked. Even if your Wi-Fi is turned off with a button, then the mobile hotspot starts up smoothly.

If you think logically, then the problem is definitely not in the absence of a wireless adapter driver, because if there were no driver, then the "Mobile hotspot" tab would not exist at all. In the same way as the "Wi-Fi" tabs in the settings.

To do this, you first need to enable the display of hidden devices. If there is an icon next to the Microsoft Wi-Fi Direct Virtual Adapter, right-click on it and select Activate.

A few more solutions

1 Error "This Internet connection cannot be shared because there is no connection to the mobile network."

2 Error: "The mobile hotspot could not be configured because the computer does not have an Ethernet, Wi-Fi, or cellular connection."

You will most likely see this error only when your computer is not really connected to the Internet. Check the connection.

This error also appears when your Internet is connected via PPPoE (high-speed connection). The mobile hotspot does not see such internet connections.

3 Devices do not connect to the running Wi-Fi network. I have not encountered such a problem, but everything can be. Most often, the connection is blocked by antiviruses and firewalls. Disable them and check the network connection.

Thanks to the mobile hotspot feature that has emerged, users can easily share the internet with other computers and gadgets.

Content:

Checking the OS version

The built-in function of creating an access point appeared in latest update OS W10.

Previously, users could not configure wireless Internet distribution without the help of third-party gadgets or programs.

Mobile hotspot option is only supported in version 1607 updates of the licensed ten.

Before you start setting up the distribution, you should check the version of the used operating system.

Follow the instructions:

Press the key "Notification Center" ;
On the left side of the screen, the recent events tab and shortcut keys will appear. Click on the "Options" tile;

In the window that opens, find the "System" tile and click on it;

Open the "About System" tab. Information about the parameters of the PC and the installed OS will appear in the right part of the window;
Check the value of the "Version" field. For the operation of the mobile spot function, only W 10 U pdate 1607 or more a new version systems.

If the 1607 update is not installed on your computer, check for it for your PC and laptop you can as follows:

1 Go to the action center again and open the window "Options";

2 Click on Update and Security;

3 In the new window, click on the check for updates button and wait for the process to complete. If there are updates available for your PC, a corresponding message will appear on the screen along with a key to start the installation. An active internet connection is required for scanning and installation.

Important! Before starting the installation of updates, save the work of all open programs as the computer will restart.

Updating adapter drivers

After enabling the function, the distribution of the Internet may not be supported by other gadgets due to the lack of the necessary network adapter drivers on the PC.

To update software, you should follow these steps:

Open the device manager window by clicking right key mouse on the "Windows" button;

In the new window, find the tab « Network adapters» and expand it... Then click on the section with the right mouse button and click on the item "Update configuration"... Make sure the WAN connection is enabled;

Now network devices will interact with this function without problems.

Hosted network support

The feature will not work if the computer or laptop does not support the hosted network.

You can check this parameter using the OS command line.

To check the option follow the instructions:

Run Command Prompt with Window Windows Search;
Enter the command shown in the picture below into the window and click Enter for its implementation;

In the appeared system information find the line shown in the picture below... The parameter value must be positive. Only in this case it will be possible to set up a working distribution of the Internet for other gadgets.

If there is no hosted network support, it means that you need to purchase an additional physical USB adapter that works with a function like this. The device is connected to a computer and mobile access is configured with its help.

We create through the OS interface

Once you've made sure you're using the correct version, downloaded the latest, and checked the hosted network's support, you're ready to start configuring your distribution.

A preliminary check of all functions will ensure that you do not encounter errors as a result of creating an access point.

An easy way to create a spot is to use the interface Windows :

1 Go to the window « Windows settings» and click on the section "Network and Internet";

2 In the list "Sharing" select the type of internet connection you are using on your computer. Wireless connection- connected to the PC, Ethernet- cable connection, 3G- connection to the global network via. If in this moment The PC is connected to the Internet with only one type of connection, the system will automatically detect it;

3 Click the tab "Mobile hot spot" and in the right part of the window, activate the slider to enable the option;

Also, the window will indicate information for connecting to the network. The network name is the name of your computer that you specified during the initial one.

The password is determined by a set of random characters. You can change these settings to create a stronger password or a new network name.

Just click on the key "Change" and enter desired values in the opened window:

Now the created access point will be displayed on all devices that work with. Run a scan for available networks and select the name of the previously created access point. Enter your password and connect. The Internet connection on another gadget will be active as long as the function is enabled on the computer. "Mobile hot spot".

On the computer, in the creation and settings window, the number of devices that are connected to the Wi-Fi distribution will be displayed.

Also, you can view the device name, its and physical ID.

Serving Using the Command Line - Suitable for All Windows Versions

This option for creating a hotspot suitable for all versions of the system Windows 10 ... The only disadvantage of the method is that the function is not operated through the operating system software interface, but via command line:

Open command prompt on behalf of the administrator;
Enter the command shown in the picture below, where NetworkName Is the name of the network, NetworkPassword - access password;

As a result of the successful execution of the command the following message will appear:

Troubleshooting

When attempting to create, the function window may display error messages. Until the problem is resolved, you will not be able to use the function.

Let's analyze all types of errors that can be encountered during the configuration of the access point.

Hotspot setup error

If you see a message stating that the configuration failed, first check the connection to the router.

The access point is not created due to the fact that it is missing from the computer.

Check Wi-Fi connection status or you can connect to another router by clicking on the corresponding symbol on the main toolbar. An inscription will be displayed next to a network with an active connection: "Connected", but not "Without access to the Internet"... Otherwise, reboot the router and try connecting again.

No network connection

Another type of error is that due to the lack of the necessary drivers, the system cannot configure the point. The Internet is on the computer, but it is not created.

If in the setup window you see the same message as in the picture below, do. The update instructions were described above as a separate subsection.

After updating the driver software, go to Windows Settings and open the tab "Network and Internet".

Then select the item "State" in the window that opens, click on the field "Network reset"... Then reconnect to Wi-Fi, Ethernet, or modem.

Gadgets don't connect to hotspot. What to do?

There are cases when the user performed the distribution and no system error messages appeared, but other gadgets cannot.

In this case, you need to disable the computer firewall. Standard or third-party antivirus software may block WAN sharing.

To disable the standard Windows Defender, in the OS parameters window open the field "Defender" and deactivate the function as shown in the figure below.

Then disable and restart mobile access. Now gadgets should connect to the Internet distribution without any problems.

Connection benefits

Use has the following benefits:

Mobility ... The user can configure the access point anywhere, regardless of their location or external conditions. The only requirement is the presence of the Internet on the PC;
Wireless connection ... Internet distribution does not require additional programs, adapters or gadgets. Use only your PC and other device that needs to be connected to the global network;
Data transfer rate reaches 11 Mbps ... It should be noted that the connection speed also depends on tariff plan provider, and the number of devices connected to the access point. The fewer there are, the better the Internet speed;
Easy function setting ... It can be created in a few minutes using;
It is profitable to use the hot spot on travel, business trips and just in everyday life, because this way you do not need to connect a paid tariff for using the Internet for everyone and. One device that has access to the Internet is enough.

Rules for the safe use of the access point

If you care about the safety of your data (information about payment cards, logins, passwords, messages), always follow rules safe use hotspot functions:

When creating a distribution for the network, always set a strong access password ... You cannot leave the access point free for use by other gadgets. The password must consist of numbers and letters of upper and lower case, as well as special characters;
If a computer or smartphone has found a free access point in a public place, you should only connect to it if you are not going to make any payment transactions or enter logins / passwords in the browser. An attacker can easily find out this data in open network... Another way out of safe use free networks- this is programs for creating VPN ;
If you still need to use an unreliable open network and log in to the site, use two-factor authentication ... It can be enabled in the settings social network, online banking or email client. To enter the site, you will need to enter not only a login-password pair, but also unique code access, which will come to the linked number in the form of an SMS message.

Thematic videos: