Android does not work on mi6. Android Pay: how to use it and what is it? Video: how to enable Google Play on custom firmware with ROOT

Payment system Android Pay was launched and has been operating since 2015 in the world and Russia has become the eleventh country where this service began to operate. Android Pay introduces a contactless payment system, and using this system, you can link a standard bank card to an Internet application in order to pay for purchases using a smartphone and smart watch... Speaking more in simple words Android Pay turns your smartphone into a real bank card and allows you to tap your smartphone to payment terminals - a great alternative instead of holding a bunch of bank cards.

What Xiaomi phones does the Android Pei system work on?

Android Pay only works on smartphones Xiaomi with an NFC chip installed in the device itself, which operates under the control of a green robot not higher than version 4.4, or better - new version 5, 6, and 7. There is an important condition for stable operation: a special firmware from the company must be installed on mi-smartphones and must be absent Root rights plus the bootloader must be locked. Usually, these actions are performed when the firmware is replaced.

Nuance on Xiaomi smartphones:

In order for payment using the NFC method to work correctly on a Xiaomi device, you need to put 2-3 checkmarks in the settings. By default, these checkboxes are disabled for device security.

How to set up Android Pay:

So how to set up Android Pay on Xiaomi? To do this, go to Settings and go to the "More" tab on the " Wireless networks". After that, scroll down to the "NFC" section and put a checkmark in front of the "NFC" item. Next, click on the field "Location of the security element" and select on the phone screen: "Use HCE Wallet". For better reliability, you can put the Android Pay application in the Startup system.

How to install?

How to install Android pay on Xiaomi? For example, let's take Android pay Xiaomi mi5: to install the application, download it to a smartphone that supports Android system 4. 4 and newer versions, as well as for watches with support for Android Wear 2. 0. This means that if the device was released in 2013 and later, then it will support this program. It is important that the phone itself has a built-in NFC chip - thanks to this chip, the payment is made.

According to a Google spokesman, if the device allows it, it can simultaneously use Android Pay and Samsung Pay, as well as Apple Pay.

Program installation:

Go to the online store Google pay and download Android pay Xiaomi.
Open this application. Take a photo of your card and include your home address.
Confirm the terms of use of the downloaded app, as well as confirm your details bank card using the code from the SMS message.
The procedure takes three minutes. Then the card can be hidden and paid with a smartphone in a matter of seconds.
After the process of downloading the program is completed, the service should be connected and configured.

To do this, you need to perform several sequential steps:

Check the operation of the NFC sensors on your device, which is responsible for contactless communication between the terminal and the smartphone. Open the "Wireless Networks" item in the "Settings" panel and see if there is a check mark next to "NFC". If not, connect the module. If there is no such box, the device may not be equipped with the necessary equipment.

Check your version operating system in the telephone menu, column "Device Information". The graph should correspond to the Android KitKat4 system, or be released a little later.

The process of setting up the program for payments also includes adding cards to the payment application. It is from the cards of the issuing bank that the funds necessary for purchases will come.

Open up installed application and click on the plus in the lower corner, then click "Add new card" and enter the card details manually / take a photo of it.
After that, we complete the installation.
Now send the code to your mobile phone to confirm this binding.
Allow the application to use the card. Ready!

Now you can pay using this service. Check out the short instructions on how to do this.

Or:

Follow these steps:

Open Android Pay and follow the instructions.
Go to settings and make sure the NFC function is turned on.
If required, set a screen lock: password, PIN, pattern key and a fingerprint.

How to use:

And finally, how to use Android pay on Xiaomi? It is necessary that the NFC option is installed and activated on the smartphone (it is sometimes disabled). If there are several cards in the wallet at once, you can choose the one with which it is more profitable for you to make a purchase. If there is only one card, then you do not need to enter the program, but simply bring your smartphone to the work terminal, as you do with classic cards that support this type of payment.

Payment via the Android Pay system is available almost everywhere where there are terminals that support such contactless payments. In Russia, these are practically all supermarkets and shopping centers.

In order for the payment via NFC to be successful, you need to unlock the device and bring it to the terminal for 2-3 seconds until a message about payment for the purchase and an image of a working card appear. Of course, sometimes the cashier may ask you to enter your PIN and sign the receipt. It all depends on the settings of the bank that issued the card and the payment terminal.

If you have connected several cards to the device, one of them must be selected as permanent. To pay with another card, you need to open the application on your phone and select the card you need to pay.
You can pay with using Android in some applications and websites. In such cases, the button “Pay for the purchase via Android Pay” will appear on the payment page for the item.

In principle, you can do this anywhere, as long as the terminal supports the PayPass and PayWave systems. To do this, bring your phone to the terminal and pay; for purchases under 1000 rubles, you will not need a PIN-code, but sometimes you are asked to indicate or sign. If the operation was successful, you will hear a signal about the confirmed payment. Then an SMS with the balance of money in the account will come, if such a service is connected.

Why doesn't Android pay system work on Xiaomi Mi5s and Mi6?

There may be many reasons why Android pay does not work on Xiaomi. For example, the phone has not passed Google's mandatory security certification. But, more often than not, you simply configured the program incorrectly.

Getting Android Pay to work is a two-step process. The first is to select the default HCE Wallet. Open the settings - Wireless networks - at the bottom of the list, click the item "Default wallet".

The second step is to add Android Pay to the list in the Security app:

We open "Security".
Autostart.
Permissions.
Find Android Pay and mark it with a tick.

Usually the problem can be solved this way.

It is safe?

During the payment, a one-time code is generated, and the data from the card is not used. Even if someone intercepts the information, it will give nothing to the attacker. So it's completely safe.

Xiaomi Mi5s on Yandex Market

Xiaomi Mi6 on Yandex Market

Xiaomi Mi8 6 / 64GB on Yandex Market

Contactless payment systems are gaining popularity. This does not require statistical research, because the conclusion suggests itself when you see the news that another large manufacturer of portable equipment has launched its own version payment system... However, Android Pay is by far the most popular.

Contactless payments from Google is a convenient system that allows you to pay for purchases in stores and supermarkets by simply touching your smartphone to a payment terminal. Yes, everything works in the same way as with contactless plastic payment cards.

The platform has many advantages:

purse, purse or handbag is exempt from the bale plastic cards eyeglass;
the smartphone replaces the cards of several banks at once, and you can choose an account for payment right during the financial transaction;
payment is much faster compared to a similar procedure carried out by means of a bank card;
increased security in which all transactions are confirmed with a fingerprint or PIN.

True, the technology is not available for everyone - a smartphone must meet the following requirements:

- if it is not there, then you can not read further, since the service simply will not work on such a device;
OS version not lower than Android 4.4 KitKat;
official, unmodified firmware, with disabled Root access;
the bootloader is intact, and there were no attempts to unlock it.

If everything is in order, to start using the service, all that remains is to install google app Wallet or similar approved by Google.

Xiaomi smartphones supporting Android Pay technology

The leader of the Chinese technology market did not stand aside and released its version of the Mi Pay payment system. True, this type of contactless payments has not yet gained wide popularity in our country from the word "absolutely". What to do? Install on your Xiaomi Android Pay, and we will tell you how to do it.

First of all, you need to familiarize yourself with the list of Xiaomi devices equipped with an NFC module, and find your own among them:

Mi 2A;
Mi 3;
Mi 5;
Mi 5S;
Mi 5S Plus;
Mi 6;
Mi Note 2;
Mi Mix;
Mi Mix 2.

As you can see, use Android service Only the owners of the flagships of the Mi line will be able to pay, but representatives of the budget Redmi series cannot boast of the necessary module and remain out of work.

Smartphone setup and map binding

Xiaomi initially does not want to work with the Android Pay system, so setting up a smartphone includes a stage presets to keep the system running stably and without interruption.

Preparatory stage

Preparing your Xiaomi to work with the payment system has several nuances. Before starting the application, you need to activate several items in the device settings, which are disabled by default for your own safety.

We enter the device settings section and find the "More" item in the "Wireless networks" section. Scroll down the list to the "NFC" section. Here, firstly, you need to enable the module itself, and secondly, in the subsection "Location of the security element" switch from the item "Built-in security element" to "Use HCE Wallet". It should be noted that depending on the localization, the last subsection may have the name "Default wallet".

Given the peculiarities of MIUI OS and its love of unloading non-system applications from memory, we recommend making Android app Pay to the startup list.

To do this, find the "Security" application on the desktop, go to the "Permissions" section, the "Autostart" subsection. In the list we find the Android Pay application and put a tick in front of it.

Application setup

Actually, all application settings are reduced to binding your cards. Today, Android Pay is supported by the following banks and payment systems:

Sberbank;
Alfa Bank;
Tinkoff Bank;
Raiffeisenbank;
MTS Bank;
"VTB 24";
Bank opening";
"AK Bars";
B&N Bank;
Promsvyazbank;
Rosselkhozbank;
"Yandex money".

Accordingly, in order to use it, you need to be a client of one of the banks presented in the list and have a Visa or MasterCard card. Both debit and credit cards are supported.

An up-to-date list of banks that allow using the wireless payment service in Russia is presented on the official Visa website.

Map binding is done in just a couple of steps:

We launch the Android Pay application, give it all the required permissions upon request.
In the lower right corner, click on the "+" icon, take a photo of the map. We check if the data from the front of the card was read correctly.
If the scan does not take place or is performed with errors, you must enter all the data manually.
After confirmation, receiving from the bank an automatic SMS with a verification code, an amount of 30 rubles will be withdrawn from the card account. After a while, the money will be returned back. This is a validation operation required to test the normal flow of all financial transactions.

The application settings indicate the card used by default for all payments. Therefore, if you need to make a payment from another card, it must be pre-marked with the main one.

Important! The application will require you to install one of the secure unlock options, be it a fingerprint or pattern. Therefore, if the corresponding offer has not been received from the system, you need to perform this step manually.

If everything is done correctly, you can proceed to testing the system in action.

How to use?

The process of using the Android Pay platform is extremely simple and is divided into two options:

Purchase of goods worth up to 1000 rubles. You just need to unlock the device, attach it to the terminal or swipe next to it, and the payment will be made. Accordingly, purchases for a small amount are carried out instantly.
Purchases over 1000 rubles. When paying for more expensive goods, you will have to additionally confirm the operation in the application itself or enter the PIN-code of the card in the terminal.

In addition to financial transactions directly in stores, you can use Android Pay to pay for purchases on the Internet.

What if Android Pay isn't working?

The main problem why your Xiaomi is capricious and does not want to pay for purchases in a contactless way is an incorrectly conducted preparatory stage.

Until the guard has not withdrawn what was typed at the checkout, quickly go over the settings indicated above. NFC must be enabled and HCE Wallet must be specified as the main wallet in use.

It is possible that MIUI found the wallet management application clogging RAM and unloaded it, so you can try running the application again.

Very often Xiaomi users complain that the application simply refuses to launch and states “Android Pay is not supported on this device”. And this happens even on smartphones without outside interference from the user. It turns out that the device may not be verified by Google if installed, even though official firmware but not global. That is, if you are using the fresh beta version of MIUI 9 - Android Pay will refuse to work and you will either have to install the global version of the firmware or use plastic cards the old fashioned way.

Conclusion

No matter how convenient the platform is, the stability of the system is sometimes still lame. Therefore, the first time after installing and configuring the application, do not bother to carry with you the main plastic card or some amount of cash, so as not to get into an unpleasant situation when the smartphone is capricious and does not confirm the payment.

Does Xiaomi Mi Note 3 have an NFC chip and is it possible to pay from a smartphone using Android Pay? This question is certainly of interest to users who are going to buy this smartphone, which looks very interesting against the background of a decrease in its price below the $ 300 bar. In short - there is NFC in Mi Note 3, but in order to pay, you need to do a number of simple steps. Let's figure it out.

How to pay for Mi Note 3

To pay you need to install free app Android Pay from the Play Store,

then launch it and add a credit or debit card to it

Now you need to go to "Settings" - "Additional functions" - "NFC" and enable it.

Now you can try to pay. It should work, but if it doesn't work, then follow a couple more simple steps. To do this, in the settings, below the NFC switch, you need to click on the "Location of the security element" and select "HCE Wallet"

If it is already selected, then still switch to "Built-in Security" and then back to "HCE Wallet".

There is no need to poke the phone into the terminal or lay down on it. If everything is configured correctly, then payments will work even at some distance from the terminal (about 2-3 cm).

Cash has long been replaced by plastic cards. But progress did not stop there either. Now more and more popular payment method is payment through special applications installed on a smartphone. Since phones already allow such operations to be carried out in as much detail as possible, many brands release own programs... One of these programs is Google's Android Pay application. What is it and on which Xiaomi phones does Android Pay work? Let's talk further.

What is Android Pay

Android Pay or Google Pay is a payment system developed by Google that allows you to pay for both online purchases and purchases “on the spot”. Payment is made using a special official application via smartphones and even smart watches.

This contactless payment system has one major advantage - there is no need to carry all the cards with you. Now, almost everyone has one or even several payment cards that can be accidentally lost or left at home. Contactless payments allow you not to worry about this point, since you will have all the cards inside the gadget - you can leave the house light with one phone in your hands.

Then, as before it was necessary to apply the card to the terminal or even insert it into a special slot, wait until the reading takes place, enter the code, now information about your card is simply debited from the phone, followed by the money transfer.

Does Android Pay work on Xiaomi

Since payment systems have not yet entered the turnover for one hundred percent, many people have a question whether Google Pay works on Xiaomi, and on what models it happens.

First, let's figure out what characteristics a phone must have in order to be able to support this application.

The smartphone must be endowed with a sensor NFC.

The NFC module is the most important feature that provides contactless communication and is, unfortunately, not in all Xiaomi phones.

Models with an NFC chip:

Xiaomi Mi 5 series (including Mi 5s);
Xiaomi Mi 6 series;
Xiaomi Mi 8 series;
Xiaomi phones Mi Note 2, Mi Note 3;
Xiaomi Mi Max series;
Xiaomi Mi Mix series.

Please note that no device from the Redmi lineup supports the nfc module.

You can clarify its availability in technical characteristics before buying, in a store from a consultant or through the "Settings" on an existing device.

Instructions:

Go to "Settings";
At the very beginning of the page ("Wireless networks") go to the "Additional / More / More" tab;
There you should see the item "NFC", if it is not activated, click on the slider to enable;

android pay does not work on xiaomi - customizable

To work with the application, you will also need to configure one function, for this click on the "Location of the security element" field on the same page;
Select “Use HCE Wallet” instead of “Built-in Security”;

In addition to this sensor, the phone must match a few more characteristics.

These include:

Android OS version is higher than 4.4. If the version is lower, the program will not install, it will malfunction, or you will not be able to link the cards.
Lack of root rights (developer / superuser rights).
Finding the user where this program has access. Otherwise, you simply won't find the app in Play Market.
Availability google account.
Locked bootloader.

If one item does not match, it may be the reason why Android Pay is not working on your device.

How to set up a payment system application

Please note that the work of payments also depends on how correctly you installed the program.

How to install and activate the Google Pay app:

Download the program from the Play Market;

Run the application;
Select or add the required account google;
In the lower right corner, click on the plus sign, which indicates the process of adding a new card;

Select the appropriate option depending on which card you are adding: debit, credit, gift, etc .;

Scan the card;
Or, in case of problems, enter all the data manually and confirm by sending SMS;

You will be notified of the successful addition of the card by withdrawing from it 30 rubles, which will soon be returned;
Now, in order for payments to go through without problems, go to the nfc section of the module, where you need to select "Payment by default Android Pay application" in the "One-touch payment" section;
In the "Use default application" section, select "Always";

If you have not missed a single step and are completely sure of the correctness of the work done, you can try to pay for your purchases.

For this:

Turn on your phone;
Enter the pattern that you installed when configuring the program;
Bring the gadget to the cheating terminal;
If you have loaded several maps into the application and want to select a specific one, open the utility and check it;

What to do if the bootloader is unlocked

Many users seek to obtain superuser rights, as this opens additional features and gives you the chance to customize your phone to your liking. But in the case of Google Pay, root-rights will play a cruel joke with you in the form of a lack of permission to install the application.

However, this situation can still be remedied.

Instructions:

Download and install the "MiFlash" program on your PC;
Go to next address bar: "C: \ Program Files (x86) \ Xiaomi \ MiPhone \ Google";
Copy the "Android" folder to the C drive and rename it - "abd";

Next, you need to go to the Main Menu, “Fastboot” mode: simultaneously hold down the power and volume down keys, after the vibration signal, release the power button, but continue to hold the volume down until the Xiaomi logo appears;
On a PC, holding down the "Shift" button, you need to click right click mouse, and then select "Open command window";
At the prompt, enter the following commands: "fastboot devices", "fastboot oem lock" and "fastboot oem device-info";
If you see the inscription "false", the bootloader is locked;
Turn on the device;

Also, the Magisk Manager application can help solve the problem with root-rights.

Other reasons for refusal to work

It happens that you have downloaded, installed the application, turned on all the functions and all the necessary characteristics are present in your smartphone, but still Android Pay does not work. What to do then?

Let's take a look at a few more points that you may not have known about.

Possible reasons why android pay doesn't work on xiaomi:

Old firmware- you just need to update your phone to latest version MIUI.
If the battery charge is below 5%, the app simply won't turn on;
As a last resort, check the card expiration date and its balance;
You may have forgotten to set autorun.

To activate autostart:

Go to "Settings";
In the "Security" section, select "Permissions", then "Other permissions";
After choosing Android Pay, check all the boxes;
Return to "Security";
Activate the "Autoplay" field next to Google Pay;
Go to "Battery and performance", then "Battery consumption by applications";
In the corresponding application, set "No restrictions" and "Allow";

(No ratings yet)

How to set up Android Pay on Xiaomi?

The spread on the territory of the Russian Federation led not only to the emergence of an opportunity for everyone to use high-quality and attractive devices, but also to many questions about the use of phones. One of them is "How to set up Android Pay on Xiaomi?"

A bit of theory

The contactless payment system invites users to pay for purchases in stores using a mobile phone.

Android Pay is a contactless payment system

You can set up Android Pay on a smartphone only if you have plastic cards of the following banks:

Alfa Bank;
Sberbank;
AK Bars;
B&N Bank;
VTB 24;
Opening of Tinkoff;
Yandex money;
Rosselkhozbank;
Raiffeisenbank;
Russian standard.

Connecting this convenient function is only possible if the smartphone meets the following parameters:

NFC allows you to exchange data between devices within 10 centimeters without fear of losing data or being intercepted

Availability official version operating system. Supports Android 4.4 and higher.
Own Google account.
Locked bootloader.

NFC is modern technology contactless communication, which has a small radius (no more than 10 cm), but provides an increased data transfer rate. The technology was introduced in 2004 and has become widespread.

Xiaomi models supporting Android Pay

To know how to set up Android Pay on Xioami, you need to decide which specific models of this manufacturer support contactless payment technology. It should be remembered that, first of all, the ability to use the function lies not in the software component of the smartphone, but in the hardware. This refers to the presence of an NFC chip.

Android Pay is not supported on Xiaomi budget segments that do not meet certain rules

To date, the full list of Xiaomi devices that support Android Pay technology is as follows:

Mi2A;
(variants S, S Plus);
Mi Mix (1 and 2).

As you can see from the list presented, all the company's flagships are equipped with support for contactless payments.

note

Smartphones Mi5, Note 2, Mi6 and Mi Mix have a body made of glass and metal. Metal surfaces conduct signals worse, so you need to pay attention to this when making a payment.

How to set up?

How to set up Android Pay on Xiaomi? The practical implementation of the task consists in performing sequential steps:

For correct payment, you need to configure the payment system directly on the phone. The algorithm of actions is as follows:

selection of the "Settings" menu;
transition to the "More" tab;
activation of the NFC function (the slider must be moved to the right);
further, on some models, you will need to select the item "Location of the security element" and activate "Use HCE Wallet".

How to set up Android Pay on Xiaomi to work in automatic mode? To do this, you must perform the following manipulations:

in the settings, find the "One-touch payment" section and set the Android Pay system by default;
put the Pay application in the startup list.

To make a payment, you need to enable the NFC module. This can be done by clicking on the corresponding icon from the drop-down notification curtain. The payment itself is made by touching the phone to the payment terminal. If several cards have been entered into the system, then upon payment you will be prompted to select the required one. It is also allowed to configure Android Pay on Xiaomi in such a way that the default active plastic will be selected.