How to clean a laptop from dust hp pavilion g6 video. Preparation of the workplace. How to disassemble an HP laptop: step by step instructions

Why is the HP Pavilion G6-2323sr hot and noisy? It's that simple! The problem with any laptop, and indeed any portable equipment, is the small heat dissipation channels, which eventually become dirty and clogged with dust. Due to the limited space and lack of heat dissipation (dust build-up) from the laptop, the temperature inside the equipment rises. As a result, it starts to get very hot. To prevent overheating of the system, which can damage the components of the laptop, the cooling fan begins to work hard to remove heat. Because of this, the noise of the work increases.

Heating in the computer can cause problems. The most common cause of overheating is dust accumulation inside the computer. The electrical components in your computer generate heat. Fans inside the computer allow air to circulate to keep the components at their normal operating temperatures. Improper cooling can cause excessive heat build-up inside the chassis, which can lead to components.

Continuous fan noise may indicate that your computer is not performing optimally due to a build-up of dust that can obstruct the vents. Symptoms of heat problems and causes of overheating. The following list lists some of the problems caused by overheating of the computer.

To eliminate such defects, mechanical cleaning of the cooling system is required. And the usual vacuum cleaning of the radiator holes on the laptop case, in the absolute majority of cases, does not bring a positive effect. Therefore, further, using a specific example, let's look at how the HP Pavilion G6-2323sr is disassembled and then cleaned from dust. At the same time, we will replace the thermal paste to improve the thermal conductivity of the "bottleneck" processor-heatsink.

The fans inside the computer make more noise because they turn faster to fight heat. If they occur in the same program, the source of the problem lies at the level of the program in question and has no connection with heat. Games become unresponsive while running. ... The following list lists some of the causes of overheating.

The added component requires more energy from the power source, which increases the temperature. Heat is also generated from the new component, which helps to increase the temperature inside the case. Over time, some fans may slow down and be used depending on how you use your computer.

Dust inside the computer.
Added a new component, for example HDD.

Step 1: Cleaning the ventilation slots to remove dust and dirt.

How to disassembleHPPavilionG6-2323sr

The first step is to de-energize. Disconnect the power supply and remove the battery.

Next, remove the keyboard. To do this, you need to pick it up with a small flat screwdriver. Next, we lead a screwdriver along the keyboard, unfastening the latches.

Most laptops have vents around the chassis to allow air to flow through the chassis. If these slots become clogged, or if components that generate heat are covered with dust, the fan cannot cool the components properly. As a result, overheating can become problematic. The accumulation of dust and dirt prevents proper air circulation through the fan blades, making it difficult for the fan to operate. If the ventilation slots are covered with dust, we recommend that you clean the computer by removing dust from the fan and heat shield.

When all latches are unfastened, turn the keyboard over and disconnect its cable from motherboard.

We remove the keyboard to the side. Unscrew all the screws (there are 5 in total) that were hidden under the keyboard. And also turn off all the loops that we see.

This prevents dust accumulation. Figure: Accumulation of dust. Figure: Accumulation of dust around the fan.

Make sure the laptop is turned off and the AC adapter is unplugged before evaporating the compressed air to avoid damaging the computer. Use a compressed air canister to remove dust from the computer vents and prevent overheating. Removing dust improves air circulation, which improves cooling, reduce fan noise.

The ventilation slots are located at different locations depending on the laptop model. You can find these slots by looking for copper or black blades inside the slots. Performing this cleaning operation regularly and proactively will greatly reduce the possibility of damage to components and prevent slowing down of your computer.

Close the HP Pavilion G6-2323sr screen and turn the laptop over. There is a screw in the center of the case. We unscrew it first.

Further from the side where the battery was. There is an inscription "Release door" and an arrow indicating the direction. We move the cover in this direction. If it doesn't work out with your hands, you can pry it off a little with a flat screwdriver.

Step 2: Check the ventilation space. To reduce the risk of overheating, make sure your computer fans are working properly. It is important to properly ventilate the laptop to ensure correct work... To do this, follow the instructions below.

The maximum limit of 35 degrees Celsius is reduced by 1 degree Celsius every 300 meters. Place the computer in an upright position on a stable, level surface. ... The electrical components in your computer generate heat, and a fan inside the computer allows air to circulate to prevent overheating of those components. Excessive heating will cause the fan to function continuously, damage components, and slow the processor down. All of these high power consumption and excessive heat problems will lead to slower applications.

Under it are the hard drive, RAM and several cables. For convenience, everything should be disconnected and removed.

Let's not forget about the Wi-Fi module. Disconnect the wires (white and black) from it and unscrew the screw that fixes it.

While the sound from a constantly running fan can be annoying, it is the first clue to keeping your computer as efficient as possible. To help your computer cool down and function at its best, do one of the following corrective actions.

Keeping laptop vents clean and clean. The electrical components inside the computer generate heat when it is running. It may happen that this heat builds up to the point of damaging sensitive electronic components.

There is another screw under the hard drive that must be removed.

And then we unscrew in a circle all the screws on the laptop case. After that, we remove the drive for reading hard drives.

As the heat increases, the fan runs faster to evacuate it and becomes more noisy. Laptops have vents on the bottom and sides to evacuate heat and allow air to circulate through the chassis. If these slots are clogged, the fan cannot cool the components properly. If dust has accumulated in the grooves, remove it with a compressed air device. After turning on the computer, place it on a flat, hard surface, making sure that Using your laptop on soft surfaces such as your knees, bed, or sofa may block air circulation and cause overheating.

Now we need to disconnect the case. To do this, slip a flat screwdriver or a plastic card from any convenient side and unfasten the first latch

If all the screws are unscrewed and the cable is disconnected, then by unfastening all the latches in a circle, the case can be easily disassembled.

Decrease the temperature inside the computer. Continuous CPU usage can build up heat in the computer, causing the fan to keep running to keep the computer at operating temperature. This rise in temperature may be caused by damaged software or A corrupt process can consume 1 to 100% of the CPU time, even a low one, but a constant 3-4% load can cause the fan to run at a high level.

Cleaning your computer screen

Your real hotbed of germs and bacteria! First, shut down your computer by unplugging it. Clean the computer screen with a slightly damp microfiber cloth. If the screen is actually stained, use anti-fog and anti-static goggles wipes. Keeping your computer screen clean will save your eyes.

Before us is the motherboard. But there is no access to the cooling system, since it is located at the bottom. To remove the board, it is necessary to disconnect all cables and unscrew one screw.

After that, the board is very easily removed from the seats. Turning it over, you can see the cooling system in the form of a radiator and fan.

Clean your computer keyboard

Clear computer keyboard twisting and shaking gently to remove dust and crumbs. Once this is done, skip the cotton swab soaked in special cleaning foam. Moisture can damage the contacts under the buttons.

Clean your computer keys

Clean your computer keys with a cotton swab soaked in household alcohol.

The accident happened so quickly!

Do not use a product that is too aggressive to avoid erasing the letters of the keys!

Removing dust from your computer

A significant amount of air rushes and, therefore, dust. This dust settles on components and is more irritating to fans for parts that get hot.

In fact, this completes the disassembly of the HP Pavilion g6-2323sr. But we need to clean the cooling system. So, we remove the radiator with a fan.

Next, detach the fan from the radiator by unscrewing the fixing screws.

Less well-ventilated components end up suffering from overheating. 6 months after the dust settles on the mesh behind. If you can open the computer's processor hood without voiding your warranty, remove the cover and start by carefully sucking up the largest sheep.

Do not suck dust directly from the fans, so turning them on may damage other components. In general, do not suck dust directly inside. Hit to take off and aim for it immediately. Take a dry air bomb to remove the stuck dust in the direction of use.

After that there should be something like this (maybe worse, maybe better) ...

We remove the dirt and brush away the dust.

Drink recipe on the computer

Never empty the trunk of your computer from chemicals. Also, do not spray with household cleaners. First of all, care should be taken not to spray insecticide on boot block computer. Disconnect the plug immediately to avoid a short circuit.

Wrap and shake slightly to release the liquid. Wait until your computer is dry to work. Professional laptop service in Wroclaw. Make sure it pays off and you fix your laptop and use our expertise. The cooling system is one of the most overlooked parts of a laptop. This system is composed, among others. from a fan, radiator, thermally conductive paste, which are necessary in the process of heat exchange. If you feel that your laptop is getting warmer, the fan is running loudly, or you cannot hear it at all, this is a signal that the cooling system is not working well.

If you need to replace the thermal paste on a laptop, then we clean the chips central processing unit and video processor ..

And the pads on the radiator ...

Apply a fresh layer to the chips cleaned from the old thermal paste.

Another questionable symptom is frequent and sudden restart of the laptop. Such situations are a signal to enter our site as soon as possible. Maintenance of the cooling system is recommended at least every six months to prevent damage to the motherboard. Maintenance by our specialists will be performed within a few hours. If you are not from Wroclaw, we can order a courier who will pick you up from your laptop on the appointed day and be diagnosed, repaired and dispatched the next day.

And we collect everything in reverse order. This completes the cleaning and replacement of thermal paste on the HP Pavilion g6-2323sr. At each step, do not forget to check all contacts and cables so that you do not have to re-disassemble the laptop later.

Remember, it was you who decided to renovate or retire. This service is not expensive and can extend the life of your laptop. Do you have a problem displaying an image on a matrix? The matrix is one of the most important components of a laptop. Matrix defects most often cause mechanical damage. Warning signs: spilled image, horizontal or vertical stripes, reduced content, frequent damage that cannot be repaired. Another annoying problem that appears on the screen is bad pixels.

V this material You will learn about the intricacies of disassembling notebooks version HP-Pavilion-G6. To disassemble your Pavilion-G6 laptop successfully and without complications, use the tips in this manual to help you disassemble it correctly and efficiently.
HP makes good electronics, but like all other gadgets, the HP Pavilion laptop can break.

These are crystalline fields that constantly shine in the same color or do not have a candle at all. A damaged die is classified for replacement and cannot be repaired due to the fragility of the electronic components. We invite you to our service in Wroclaw for free diagnostics and quick exchange matrix.

The laptop hangs, runs slowly? Your laptop starts to run slower than before and is annoying to work on because of the long startup time. There is also a complete suspension of the so-called system. Freeze your screen when loading programs or games more efficiently.

Laptop components and components are available and easily replaceable. To get inside the HP-Pavilion g-6 laptop system, to remove dust, replace any board or change thermal paste, you will need to open the case. It should be remembered that disassembling a laptop is a tremulous business, it does not tolerate haste or oversights, so please be patient, set aside an hour so that no one bothers you, and you can get down to business using the instructions below.
The first thing that needs to be done is to remove the battery from the laptop (those who are not particularly patient in disassembly may not remove it). This is the simplest step, but you need to complete it first.

Now you need a screwdriver to unscrew the screws securing the laptop case. Flip the device over to access the rear plastic compartment that covers the main components of the computer.

When the screws are unscrewed, you can remove the cover, under which you will immediately find a 2.5-inch hard SATA drive, fee random access memory(4 Gb DDR3), network access card and CMOS element providing power for Bios.
To remove the hard drive, you must remove it from the clips. This is done by gently pressing the hard drive case with a shift to the left. You will feel when the latches release it. Then remove the memory card by loosening the retaining latches, then it will easily slide in for removal.

Now we withdraw DVD drive... The bolt that holds it can be easily identified visually. We also carefully unscrew it so as not to damage the adjacent parts, and pull out the DVD-Rom without effort.

Be careful, if the drive does not want to exit, inspect carefully whether all the bolts are unscrewed, one of which is imperceptibly located near the network access card.
After removing all the most important parts, you can start removing the keyboard. Its mounting system is quite simple, but it takes a little dexterity and patience to pull the keyboard out without damage. HP-Pavilion laptop G6. In total, the keyboard on this laptop is held by five latches that are located on the top of the keyboard.
For work, you need a flat screwdriver, which you need to press down on the latch and slightly raise the dial. In this position, the clip does not block the keyboard. You need to repeat this procedure with all the clips, and when they are disconnected, you can slowly unfold the dial and disconnect the ribbon cable on the main board.

It can be assumed that half the job has been done, and now all the screws on the laptop case should be unscrewed.
It is also necessary to disconnect other loops that opened in the place where the keyboard was.
Now we open the case of the laptop HP-Pavilion G6. By plastic card or other narrow object, carefully detach the upper compartment. Now you will have access to batteries, coolers, USB ports and other items on the main board.
As you can see, you can independently disassemble the HP-Pavilion G6 laptop, but be careful not to damage the fragile microcircuits. Now you can replace parts, clean the insides of dust or replace thermal paste.