What is a Rostelecom TV box for? TV set-top box "Rostelecom". IPTV set-top box: description, connection and configuration

Digital television through an Internet connection from the RTK provider - this is access to a huge number of channels using one device. Additional options of the latest television sets allow you to watch movies and programs in maximum resolution. But what if there is one set-top box and two TV sets? How to connect a second TV set to the Rostelecom set-top box? And make TV Rostelecom available throughout the apartment? To answer these questions, you first need to figure out how to connect the Rostelecom prefix at all. And only then figure out how to connect an interactive TV to two TVs.

Connecting a set-top box to a TV

Provider "Rostelecom" provides interactive TV, which includes a large number of channels in excellent quality, film distribution, the ability to record videos, films and TV programs and a whole collection of karaoke songs. To receive the service, you need a certain device - a tuner, which can be bought from the company in its office. The official website of Rostelecom will help you find out how much the equipment costs and the amount of the monthly payment. Rostelecom TV service will be activated some time after the tuner is purchased and the monthly payment is made. The connection of the receiver to the TV set can be done personally or by using the services of a company technician.

Read also Transferring money from card to card Rostelecom

In order to connect the device, you need access to the Network, cables for connection and power, and a remote control. All of these components are in the box with the equipment, therefore, their availability must be checked at the time of purchase. So, let's move on to the question of how to connect a set-top box. To do this, you will need the following scheme, the points of which must be followed in stages:

Insert the wire from the power supply unit into the socket of the device without connecting it to electricity.
Using the router's Wi-Fi settings in the IGMP Proxy section, select the "Bridge" item and define the LAN port. Next, you need to save the selection with the "OK" button and restart the Wi-Fi router.
Using an Internet cable, one end of which is inserted into the previously selected LAN port, connect the Wi-Fi router to the set-top box.
Then connect the set-top box to the TV receiver using an HDMI cable (or, if it is absent, a "tulip").
Turn on TV and set-top box.
Select the type of connection (SCART, HDMI or AV), according to the connector to which the device is connected.

The splash screen appears and the software starts loading newest version indicates that the receiver was connected to the TV correctly. After completing the download of the software, you must read and accept the terms of the offer.

Connecting a second TV to the set-top box

To connect a second TV to one set-top box, you must use the port for the PCA cable, since the HDMI port is already occupied by the first TV receiver. Based on the distance from the tuner to the second TV, a PCA cable of the required length is purchased and with its help the set-top box is connected to the second TV. This connection method assumes that the same channels will be broadcast to both TVs. In order for 2 TVs to broadcast channels that are different from each other, you need to purchase and connect a second set-top box. Another important point in this matter is the execution of an agreement with RTK for connecting another TV to the network. The purchase of a second Wi-Fi router is not required if the already purchased one has an auxiliary LAN port.

Many subscribers who already use an IPTV set-top box, as well as those who are just planning to connect to the network, want to know how to connect an interactive television Rostelecom TV to two TVs.

Rostelecom offers its subscribers equipment, that is, a mini-computer (receiver), which multiplies the signal transmitted from the Internet. System settings such a tuner makes it possible to adjust a high-quality image (up to Full HD), but it is intended only for one TV.

For all subscribers who connect for the first time, you need a router, as well as an IPTV set-top box. Rostelecom TV offers its users a choice of them, these are: "Standard" or "Premium". Both receivers support HD and 3D resolutions. The main functions are:

support for interactive functions;
support for digital formats SD and HD;
the ability to independently use pause, record, rewind, archives.

At the same time, the "Standard" prefix uses the resources available in the Rostelecom network. And the "Premium" prefix uses the built-in HDD, this gives it many useful features. Therefore, it costs much more. After connecting such devices, subscribers can watch a large number of HD channels of high definition images.

There are several options, this usage:

internet cable;
Wi-Fi;
PLC adapters.

The cheapest way is to use an Internet cable.

Without plugging in, the power cord is plugged into the tuner jack.
Through the settings of the router, go to the IGMP Proxy section, select "Bridge" and determine the LAN port. Click "OK" to save this and then reboot the router.
An Internet cable connects the router to the receiver by inserting one end of it into the LAN port.
The tuner is connected to the TV using an HDMI cable or "tulip".

If the HDMI cable was not included in the set when purchasing the set-top box, it is advisable to purchase it, otherwise plasma, LCD and will not give the expected image clarity.

Set-top box setup

Plug the power supply into an outlet, that is, connect the receiver to the mains. Now it's time to make the settings, for this with the remote remote control(Remote control) translate TV into video mode. The windows that appear will ask you to enter your login and password to boot a new device. We take these data from the registration sheet and enter them on the remote control into the request windows. After that, you must confirm the entered data with the "OK" key.

You don't have to mess around with channel settings. This is done automatically, without the intervention of the subscriber. Therefore, a window for selecting channels will immediately appear on the screen.

Sometimes the device may ask you to enter a PIN. Usually for new receivers this is a set of such numbers: 0000 or 1111. They try to enter them in turn. If there is no result, they call 8 800 100 08 00 - this is. They will help you unlock your device.

How to connect a second TV to one set-top box

To connect a second TV to an existing set-top box, you must carefully examine it. You will see that the HDMI port is busy, the first TV is already connected to it. There is another one nearby, which is designed to connect an RCA cable. We will use this port.

If the second TV set is installed in the kitchen, it means that you need to purchase an RCA cord of the required length and connect the TV to the receiver with this cable. Now watch interactive Rostelecom TV is possible on 2 TVs from one tuner.

But it is important to bear in mind that using this connection method, the same channels will be displayed on two TVs. If there is a need to watch different ones on each of the TVs, then you will have to buy another receiver.

How to connect two TVs

To connect two TVs so that they show different channels, you need to purchase two set-top boxes. If one of the TVs is already connected to such a receiver, then you need to purchase it for the second TV. And also sign an agreement with the provider Rostelecom to connect an additional TV to the network. You don't need to buy another router, the main thing is that there is an additional LAN input on the existing one.

Now you need to prepare an HDMI cable or "tulip" that connects the receiver to the TV. They measure the exact distance from the router to the second tuner. Buy the required length of the Internet cord. This cable connects the set-top box to the router. Connecting and setting up both receivers is done in the same way, as mentioned above.

We must remember now each TV has its own set-top box, which is tuned only to this TV. Therefore, during repairs, as well as moving, try not to confuse them.

Already you will not surprise anyone with 2-3 TVs in the house - one is always present in the kitchen, where the whole family gathers, the other in the living room, and the third can be in the nursery and in the bedroom. But what if you bought one IPTV service package, but you want to connect a second or even a third TV to it?

Do you really need to purchase their own set-top box for each of them? Logically, this is how it should actually be, but there are other ways to view one packet on multiple receivers.

Note: both TVs will be able to show only one channel, that is, users will be able to watch the same program.

If you are satisfied with this state of affairs and you agree that:

You will watch the same program on 2 TV sets.
Use just one remote control to switch to another viewing channel.
You will have to buy long cables, and if you are going to connect a second receiver via a high-frequency HDMI cable, you will have to pay a decent amount. Of course, the tulip connection is cheaper, but the playback quality will be much lower.

Through Rostelecom equipment

Pairing devices on a free connector. Consider carefully back panel set-top boxes, and if you find a free socket, then the connection will go through it.
If the first receiver is connected with an HDMI cable, then the jack marked RCA (for tulip) can be used and vice versa.
We go to the store and buy a cable of the required length and mount it for connection. Note! The port on the receiver for this type of cable must be free. If you have an old model of set-top box, then the HDMI jack may be missing, instead RF OUT will be displayed. Connect both devices through this port with tulips.

Via signal modulator and divider

This is a costly but reliable option:

You need to purchase a couple of special devices - this is a high-frequency modulator and a divider. The first is connected via the cinch of the RCA connector to the set-top box, and then the divider is connected via a high-frequency cable.
Then the outputs are connected to TV sets. But if you have purchased equipment with multiple RCA jacks, then you will no longer need to purchase a divider.

Via PLC adapter

A modern solution without problems is the purchase of branded PLC adapters (approximate cost is about 1 thousand rubles).

This connection is absolutely reliable, it is not only protected from tampering, but also transmits high definition signals. Purchase a separate adapter for each TV receiver, and the problem will be solved, but in this case you will also be able to watch different programs on each of the TVs. The provider allows the purchase of several models by installments at once, and this is important.

Modern TV models are equipped with a large number of options that allow you to watch movies and programs in the maximum available quality. Interactive TV is one of the most popular services offered by the RTK provider. An IPTV set-top box from Rostelecom is purchased at the company's office together with a contract for the corresponding tariff. You can install several set-top boxes at the same time, which is advisable if there are several TVs in the house at once. How to connect the Rostelecom prefix to the TV and set it up correctly is described below.

Contents of delivery

The set-top box "Rostelecom" is supplied by the provider in the following configuration:

Prefix.
Power Supply. It is connected to the mains through the socket.
Ethernet cable. It is used to connect to a modem, optical terminal or router.
The remote control from the Rostelecom prefix, which allows you to control the TV.
HDMI cable.
Batteries.

How to connect the Rostelecom prefix

The package of interactive TV services provided by the RTK provider includes hundreds of high-definition channels, a karaoke collection, the ability to rent films and record programs and movies. In the office of the provider, the prefix "Rostelecom" is provided, the price of which varies depending on the chosen tariff: "Standard" will cost 4 thousand rubles, "Premium" - 8700 rubles. Connection and provision of the service is carried out by means of equipment issued at the provider's office. You can find out the price of the Rostelecom prefix on the official website of the RTK by contacting the offices or by contacting the operator.

The service is activated after purchasing the set-top box and paying the fee to the subscriber account. The connection of the Rostelecom set-top box to the TV can be carried out both by the subscriber and by the provider's technician. The equipment works with Internet access, power and connecting cables and a remote control.

The set with the Rostelecom set-top box is supplied with everything necessary for its operation. The user's manual indicates the complete set of equipment, which must be checked before purchasing.

Connection diagram of the set-top box

TV set-top box "Rostelecom" is connected using HDMI cable to the TV. The LAN connector connects the set-top box to the router. A power cable is supplied with the Rostelecom set-top box, which is connected to the network.

If there is no HDMI connector on the TV, connect to IPTV set-top box carried out using an AV adapter. A special adapter is also included in the kit.

Turning on the console

With a paid and activated service, the TV is turned on using the remote control, and the Rostelecom prefix itself - from the control panel that comes with the kit. When the receiver is properly connected to the TV, a splash screen appears on the screen and the boot process starts latest version software. Upon completion of the download, you must accept the terms of the offer. The start menu is then displayed on the screen, which notifies of the readiness of the equipment for operation. All functions of the set-top box are displayed in the menu. On the official website of the RTK, you can read about the options, advantages and disadvantages of each of them.

Depending on which connector the Rostelecom prefix was connected to, the type of connection is selected when working with the menu.

Features and additional functions

The Rostelecom IPTV set-top box can be simultaneously connected to two TVs at once. This is done by connecting the receiver to different connectors: AV and HDMI. Wires of a suitable length if the cable length is insufficient can be obtained from any electronics store.

This connection option differs in that the same channel will be broadcast on both TVs. If you need to broadcast different channels, you need to purchase an additional set of equipment.

The user's manual describes in detail how and where it is best to install the set-top box and the conditions for its operation. Before connecting the receiver, it is advisable to read the instructions and strictly follow them - this will extend the life of the equipment and help avoid repair costs.

Connect the prefix to personal computer using the supplied cables is not possible. If you are connected to the service interactive television just download the special software and enter user data in the registration fields. After that, access will open to almost all channels broadcast on TV.

Rostelecom offers its customers a convenient service - the Zabava application. It can be downloaded to your computer, tablet or phone. After entering the user data, access to television will open. Downloading the application is mandatory - just go to the Zabava page and log in as a client of Rostelecom! You can watch movies and TV shows in high quality on the site.

Connecting a second set-top box

If there are two TVs in the house, it is advisable to buy two sets of equipment, since connecting the equipment to one set-top box will allow you to broadcast the same channel to both TVs at the same time. Independent broadcasting is only possible with different set-top boxes.

Both set-top boxes can be connected to one router, since it has 4 LAN outputs. For example, the first TV set can be connected to the first set-top box, which is connected with a cable to the LAN1 port, the second TV, respectively, to the second set-top box and the LAN2 port. The length of the Ethernet cable supplied with Rostelecom equipment may not be enough, so it is advisable to purchase a wire of suitable length in advance.

Two set-top boxes operating at the same time require a good Internet connection, since the traffic they use increases significantly, which can provoke both interference in the broadcast and disruptions in the Internet.

Prefix malfunctions

In case of difficulties, the user can always contact the technical support service of Rostelecom at the appropriate numbers indicated both on the official website and in the agreement concluded when registering the service. The operator can tell you how to properly connect and configure the Rostelecom set-top box and eliminate the problems that have arisen. In the event of a malfunction of the equipment or the termination of its functioning, experts do not advise trying to repair it on your own: it is advisable to describe the problem to the operator, who will make a decision and, if necessary, send a technician to the specified address who will fix the problem.

The set-top box may malfunction. Despite the fact that the tuning of all channels is carried out automatically, in some cases you may encounter malfunctions. The emergence blue screen indicates an incorrectly selected connector for connection. A running rabbit usually accompanies problems with the firmware of the equipment, its incorrect connection or bad contact in the connector. Such malfunctions are eliminated by checking the equipment and rebooting it. Experts can advise replacing the "tulip" cable with HDMI.

If, with correct connection and correct work the set-top box does not broadcast all the channels included in the issued package of services, then there is a high probability that the subscriber did not pay the fee on time. It is extremely rare to encounter technical failures. In the event of any malfunctions, it is advisable to immediately contact technical support companies.

Additional package of options

One of the most common features is TimeShift support. The option allows you to pause and resume the television broadcast at any time.

Rostelecom subscribers have a choice of 180 different TV channels. The STB offers programs to users based on their interests and preferences.

Also, subscribers can arrange films for rent. You can select and purchase your favorite paintings at the top of the screen using the remote control.

Resetting STB settings

You can improve the quality indicators and expand the functionality of the Rostelecom TV set-top box by flashing it. Resetting the settings is simple: just go to the menu, select Def. Settings and confirm the Exit & Save selection. After that, all hardware settings are reset. The subscriber can configure the set-top box independently or with the help of a company specialist. The setup process is described in detail in the equipment manual.