After using a ZTE phone for some time, I faced some problems, my smartphone did not turn on and, I solved these troubles and in the article I will tell you about it. ZTE is one of the most famous phone and telecommunications equipment companies in China. However, in the international market, the smartphones of this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components for mobile devices in the Middle Kingdom is trying to improve every year, the problem of low-quality assembly remains relevant.

This is what a ZTE smartphone looks like when disassembled. Here the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have purchased this device complain about poor battery performance and problems with recharging the smartphone. Others write about ZTE bugs. Such failures take place for this device not without a trace and, ultimately, turn it into a so-called "brick" - that is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone does not turn on, and also the main ways to solve this problem will be discussed.

What are the reasons for ZTE phone failure

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain components of the device;
• Software - malfunctions in the software of the device.

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working are related:

• With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
• In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
• Falling or falling into the water can also result in a fatal malfunction of the smartphone.

Among the software errors are:

• Critical system failure when updating the firmware (software) version of the smartphone;
• A virus attack, the result of which is the corruption of system files responsible for downloading and operating the phone.

Therefore, below will be listed the main ways to solve the problem of turning on the ZTE phone.

Hard-reset is the only, today, software way to bring the phone into working condition in the event that it refuses to turn on at all. We will talk about this method below.

How To Fix ZTE Phone Power On Problem

So, there is the following effective way to independently resolve this issue to turn on the ZTE smartphone. It is based on the so-called "Hard Reset", that is, the complete removal of all user data on the smartphone, as well as resetting all settings on it to the factory settings. This procedure helps to fix a huge number of software errors, so you should try using this method. To implement it on a ZTE smartphone, you must:

1. Remove the battery for a few seconds, then insert it back;

   
   This is what one of the ZTE models looks like when disassembled. Here you can see how you can remove the battery from your ZTE phone.

2. Press the volume up key and turn on the phone at the same time;
3. As soon as you see the data recovery window and feel the vibration of the device, release both keys;
4. To navigate through the menu items, use the volume buttons, to confirm the action - the power key;
5. Now, in this window, we need to find the "Wipe Data / Factory Reset" tab and activate it;

   This is the control panel for smartphone user data. To clear all data and reset device settings, click on "Wipe Data / Factory Reset" (to confirm the selection, click on the power button)

6. In the next window, we confirm the deletion of user data;

   Confirmation window for clearing user data. Here we have to click on "Yes- delete all user data"

7. The procedure for a complete reset of the phone begins, after which the "Hard Reset" menu opens again - in it we activate the "Reboot system now" item.

   The final "Hard Reset" window, which is similar to the start one. After the end of the procedure for resetting the smartphone settings to the factory settings and deleting all data, select the "Reboot system now" item to reboot the device.

8. As a result, the smartphone restarts, after which the device should work.

Before this procedure, do not forget to back up the files on the flash card and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS and others.

Conclusion

The method described above is the only one today in the event that the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to the failure of the smartphone and how to fix them will be useful for you:

4 years ago

Hello everyone. Today I would like to analyze all the most common reasons why an Android smartphone may not turn on. I will not touch upon those situations when disassembling the phone and interfering with the electronic filling is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly stops turning on, it is not necessary to immediately run to a service center or workshop and send it in for repair. Most likely, there is a chance that you can do it yourself and save some amount (programs for home bookkeeping on Android will also help you in saving, look for them on the blog). Below we will consider the main measures that can be taken if an Android smartphone or tablet does not turn on. And so, let's get started.

Android phone does not turn on. 5 ways to solve the problem.

Method number 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole thing turns out to be in a discharged battery. And I perfectly understand when they tell me that they have been charging the smartphone all day, but it still does not turn on. Some devices have one unpleasant feature - if the battery is discharged very strongly, then it will not charge, even if you keep it on charge all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old mobile phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not plugged into an outlet at this time.

We fix the bare wires on the battery with tape for a few minutes.

Important. Do not reverse polarity.

Method number 2

Faulty charging. Of course, the second thing to check is the health of the charger. Everything is simple here - we take a working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds trite, it helps one in five.

Method number 3

If the phone does not turn on, then it may simply be frozen. To revive your device, we will apply a long-known, but still relevant method - take out the battery and insert it again.

Unfortunately, this trick does not work on many modern phones with a non-removable battery. In this case, to reboot, you need to find the reset button and press it with a paper clip, for example. It can be anywhere, but it is usually located near the SIM card slot or on the back of a smartphone or tablet. There is sometimes an inscription “reset” or “off” near the reset button. The photo below is an example of the location of such a button in a smartphone.

Method number 4

This method is applicable if your phone does not really turn on, but does not turn on completely. For example, it hangs on your Android logo and nothing else happens. This happens due to a malfunction in the smartphone software. Then a hard reset or, in translation, a hard reset will help us. For each model of the device, it is made in different ways. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future, I hope to create a separate section on this topic on the blog.

Unfortunately, not all smartphones support hard reset, it depends on the recovery installed in the device. If you are interested in learning more about what it is, look on the Internet.

For example, there is no such function by default, in many sony phones, but the manufacturer has provided the ability to restore the software using a special utility called Sony pc companion.

Method number 5

Not often, but it still happens that smartphone won't turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to bend the contacts with tweezers or a small screwdriver to improve the connection to the battery. The main thing here is without fanaticism, otherwise you will only make it even worse.

If none of the methods helped and your phone still does not turn on, then the problem most likely lies in the hardware itself and only the service center can help you.

Respectfully yours, Ivan Derbenev.

After using a ZTE phone for some time, I faced some problems, my smartphone did not turn on and, I solved these troubles and in the article I will tell you about it. ZTE is one of the most famous phone and telecommunications equipment companies in China. However, in the international market, the smartphones of this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components for mobile devices in the Middle Kingdom is trying to improve every year, the problem of low-quality assembly remains relevant.

This is what a ZTE smartphone looks like when disassembled. Here the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have purchased this device complain about poor battery performance and problems with recharging the smartphone. Others write about ZTE bugs. Such failures take place for this device not without a trace and, ultimately, turn it into a so-called "brick" - that is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone does not turn on, and also the main ways to solve this problem will be discussed.

What are the reasons for ZTE phone failure

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain components of the device;
• Software - malfunctions in the software of the device.

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working are related:

• With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
• In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
• Falling or falling into the water can also result in a fatal malfunction of the smartphone.

Among the software errors are:

• Critical system failure when updating the firmware (software) version of the smartphone;
• A virus attack, the result of which is the corruption of system files responsible for downloading and operating the phone.

Therefore, below will be listed the main ways to solve the problem of turning on the ZTE phone.

Hard-reset is the only, today, software way to bring the phone into working condition in the event that it refuses to turn on at all. We will talk about this method below.

How To Fix ZTE Phone Power On Problem

So, there is the following effective way to independently resolve this issue to turn on the ZTE smartphone. It is based on the so-called "Hard Reset", that is, the complete removal of all user data on the smartphone, as well as resetting all settings on it to the factory settings. This procedure helps to fix a huge number of software errors, so you should try using this method. To implement it on a ZTE smartphone, you must:

Before this procedure, do not forget to back up the files on the flash card and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS and others.

Conclusion

The method described above is the only one today in the event that the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to the failure of the smartphone and how to fix them will be useful for you:

Hello everyone. Today I would like to analyze all the most common reasons why an Android smartphone may not turn on. I will not touch upon those situations when disassembling the phone and interfering with the electronic filling is required, since this is the work of completely different specialists.

If your smartphone or tablet suddenly stops turning on, it is not necessary to immediately run to a service center or workshop and send it in for repair. Most likely, there is a chance that you can do it yourself and save some amount (programs for home bookkeeping on Android will also help you in saving, look for them on the blog). Below we will consider the main measures that can be taken if an Android smartphone or tablet does not turn on. And so, let's get started.

Android phone does not turn on. 5 ways to solve the problem.

Method number 1

From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole thing turns out to be in a discharged battery. And I perfectly understand when they tell me that they have been charging the smartphone all day, but it still does not turn on. Some devices have one unpleasant feature - if the battery is discharged very strongly, then it will not charge, even if you keep it on charge all day.

In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then insert it back and put the phone on charge as usual, everything should be OK.

If getting a frog is problematic for you, then you can use any old mobile phone charger. Cut off the old plug and protect the wires.

Make sure that the charger is not plugged into an outlet at this time.

We fix the bare wires on the battery with tape for a few minutes.

Important. Do not reverse polarity.

Method number 2

Faulty charging. Of course, the second thing to check is the health of the charger. Everything is simple here - we take a working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds trite, it helps one in five.

Method number 3

If the phone does not turn on, then it may simply be frozen. To revive your device, we will apply a long-known, but still relevant method - take out the battery and insert it again.

Unfortunately, this trick does not work on many modern phones with a non-removable battery. In this case, to reboot, you need to find the reset button and press it with a paper clip, for example. It can be anywhere, but it is usually located near the SIM card slot or on the back of a smartphone or tablet. There is sometimes an inscription “reset” or “off” near the reset button. The photo below is an example of the location of such a button in a smartphone.

Method number 4

This method is applicable if your phone does not really turn on, but does not turn on completely. For example, it hangs on your Android logo and nothing else happens. This happens due to a malfunction in the smartphone software. Then a hard reset or, in translation, a hard reset will help us. For each model of the device, it is made in different ways. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future, I hope to create a separate section on this topic on the blog.

Unfortunately, not all smartphones support hard reset, it depends on the recovery installed in the device. If you are interested in learning more about what it is, look on the Internet.

For example, there is no such function by default, in many sony phones, but the manufacturer has provided the ability to restore the software using a special utility called Sony pc companion.

Method number 5

Not often, but it still happens that smartphone won't turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to bend the contacts with tweezers or a small screwdriver to improve the connection to the battery. The main thing here is without fanaticism, otherwise you will only make it even worse.

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? Here's what you need is a ZTE factory reset. What is it? A hard reset is an operation that deletes all data (including settings, apps, calendars, pictures, etc.) on the ZTE Blade and restores the default settings that make your device look like it's coming straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to run faster, when there are some difficulties in the operation of the operating system. Here's how to reset your ZTE.

A soft factory reset and a hard factory reset are two methods you can use to factory reset your ZTE and restore your phone to be as good as new. Perhaps you want to reset your phone protection because you forgot your screen lock password. Or you want to restore factory settings by hard resetting your phone. Before restarting your Zmax 2, I suggest that you try performing a ZTE soft reset first. Wallpapers for Android.

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Press the ZTE main menu.

2. Tap Settings> Privacy.

3. Tap Factory Data Reset.

4. Tap Reset Phone. Check, remove SD card if you want to remove memory card.

5. Click Erase All.

Wait a few seconds, your phone will automatically reboot and ZTE will reset. If you see that your problem is still not fixed, you can try hard resetting your ZTE phone.

Hard reset ZTE to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then bring it back.

3. Press the volume up and power button at the same time until it vibrates, then release the power button, there will be ZTE recovery screen.

4. A couple of options will appear on the screen, select "Wipe data / Factory reset" using the volume key and confirm the selection with the power (power) button.

5. Then on the next screen select - delete all user data using the volume button, press the power button to confirm.

6. All data and ZTE cache will be erased automatically and a screen with a reboot system will appear, reset to factory defaults.

8. Your phone will turn off and restart.

Completed ZTE hard reset. So wait a few minutes. And then you will see that your smartphone is performing better than before.

• All music, videos, files and folders will be deleted automatically.
• Your entire contact list and history of calls or SMS-MMS chats will be automatically formatted from your smartphone.
• This means that all information will be deleted from your phones that you saved on your phone before.
• Therefore, I suggest you, before you reset your ZTE phone Zmax 2, please back up your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about ZTE hard reset or any tips or tricks to improve your Smartphone, mainly ZTE smartphones, please do not hesitate to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course, you are important to us.

Phone flashing is always a risky business. It would seem that even if you follow the instructions strictly, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a work phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

First, the phone must always be charged more than 50%. Secondly, before flashing, you must make a backup copy of the data (Backup). In this case, you can return the phone to its original state. Having found instructions on any firmware on an authoritative forum, according to which the pioneers have already successfully flashed, do not neglect these points, unless, of course, you are a guru for unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in the forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule is personal care and strict adherence to instructions.

Even if after the firmware your ZTE V880E does not turn on at all, and it became clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a "dead" device.

Recovery instructions for ZTE V880E

• If the phone is still working, and the radio module has not been backed up, then we definitely do Backup QPST. How to do it is described. If ZTE V880E does not turn on and Backup was not done, then IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack it into any folders. We also download the Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume "+" and "-" and insert the cable, without releasing the volume, press "on". DFU mode is loaded. The phone is identified as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The jackdaw on the right is not selected. We press the left button below. After completing the process, the smartphone will enter FTM mode by itself. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English (gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). Those who do not have it, then we skip this point.

If your android phone samsung, xiomi, lenovo, asus, zte, huavei, sony and so on freezes and has a non-removable battery, this is not a big problem.

Modern Android phones have a hidden function to manually restart the operating system.

It consists in holding the power button on the device not for five seconds, as usual, but for 20-30 seconds.

Such a prolonged action actually causes the phone to reboot. Of course, many owners of mobile devices with a non-removable battery, if the phone freezes, feel completely helpless. This is why this guide was created.

There is absolutely no need for you to panic in such a situation. Just keep holding the shutdown button for longer than the normal period of time.

Sometimes it is necessary to simultaneously press and hold one more (volume down and power down) or even two buttons.

If nothing happened - there is absolutely no reaction, then you just have to wait until the battery is completely discharged.

Of course, I don’t want to wait, but it’s better than carrying it for repairs to be disassembled and rebooted. Let's dig a little deeper.

How I rebooted my frozen phone with a non-removable Samsung A3 battery

Although phones are improving all the time, sometimes progress can not play into our hands. This happened with devices with a non-removable battery.

Previously, in the event of a freeze, I quickly pulled out the battery, plugged it in again, turned it on and everything - the problem is solved.

Today, such resuscitation will not work on many android devices, as, for example, on my samsung a3.

I was helped by the option of a combination of buttons "Power" + "Volume Down" for about ten seconds. The device has turned off and on.

Why android phone freezes and won't reboot

If the phone is frozen and does not respond to any touch, then this is either a system glitch or a screen problem - in the touchscreen.

In practice, the phone freezes most often due to applications - they may not have enough RAM and some kind of error may occur.

If the battery is removable, then don't fuss, just pull it out for a minute - a 100% working way to get rid of freezes.

When the classic version does not work, the forced one remains: pressing the "Off" and "Volume" buttons at the same time (what volume and even two at once depends on the device - xiomi, samsung, asus, sony, zte, lenovo, huavei)

What to do with an android phone to get rid of freezes

Sometimes the phone can be restarted, but the freeze keeps coming back. Then try

One of the main reasons for freezing is low performance (weak device), so in such devices it is advisable not to use effects, such as animated wallpapers - they heavily load memory and processor.

Also, do not overload even the memory card - this also contributes to freezing. Optimal balance when 10 percent of memory remains free.

NOTE: manufacturers of phones with an unearthly battery are well aware that the phone can freeze and not react to anything, therefore, they provide a way out of this situation - holding the shutdown button until the android OS reboots. Good luck.

Phone flashing is always a risky business. It would seem that even if you follow the instructions strictly, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a work phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

First, the phone must always be charged more than 50%. Secondly, before flashing, you must make a backup copy of the data (Backup). In this case, you can return the phone to its original state. Having found instructions on any firmware on an authoritative forum, according to which the pioneers have already successfully flashed, do not neglect these points, unless, of course, you are a guru for unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in the forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule is personal care and strict adherence to instructions.

Even if after the firmware your ZTE V880E does not turn on at all, and it became clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a "dead" device.

Recovery instructions for ZTE V880E

• If the phone is still working, and the radio module has not been backed up, then we definitely do Backup QPST. How to do it is described. If ZTE V880E does not turn on and Backup was not done, then IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack it into any folders. We also download the Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume "+" and "-" and insert the cable, without releasing the volume, press "on". DFU mode is loaded. The phone is identified as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The jackdaw on the right is not selected. We press the left button below. After completing the process, the smartphone will enter FTM mode by itself. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English (gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). Those who do not have it, then we skip this point.

Phone flashing is always a risky business. It would seem that even if you follow the instructions strictly, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a work phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.

First, the phone must always be charged more than 50%. Secondly, before flashing, you must make a backup copy of the data (Backup). In this case, you can return the phone to its original state. Having found instructions on any firmware on an authoritative forum, according to which the pioneers have already successfully flashed, do not neglect these points, unless, of course, you are a guru for unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in the forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule is personal care and strict adherence to instructions.

Even if after the firmware your ZTE V880E does not turn on at all, and it became clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a "dead" device.

Recovery instructions for ZTE V880E

• If the phone is still working, and the radio module has not been backed up, then we definitely do Backup QPST. How to do it is described. If ZTE V880E does not turn on and Backup was not done, then IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
• Download and unpack it into any folders. We also download the Russian modified firmware version 2.3.6.
• We take out the battery, simultaneously hold down the volume "+" and "-" and insert the cable, without releasing the volume, press "on". DFU mode is loaded. The phone is identified as ZTE Handset Diagnostic Interface.
• Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The jackdaw on the right is not selected. We press the left button below. After completing the process, the smartphone will enter FTM mode by itself. DFU Tools can be closed.
• We reboot the smartphone, now it has Chinese firmware installed.
• In the settings menu, switch to English (gray letter A).
• Install CWM and, as usual, flash to Russian 2.3.6.
• Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). Those who do not have it, then we skip this point.

A video example of a factory reset on a ZTE Blade V7 smartphone (use only as a last resort and after reading the article)

At some point, your zte smartphone, despite the legendary reliability of the brand, may let you down and simply not turn on, even ceasing to react to the keys. What to do in this case and how to restore the functionality of your mobile device? This article is dedicated to this particular topic.

Of course, you can immediately contact the service center, but I recommend that you carry out several procedures that will not take you much time, but at the same time they will be able to reanimate the phone without the help of third-party specialists.

To begin with, let's immediately divide the possible causes into two global sections - mechanical and software. You can try to solve the software part on your own. It is more difficult if mechanical damage has occurred: device contamination, the consequences of contact with water, or a simple fall on a hard surface ... all this may require a mandatory visit to a service center. Let's be optimistic and first try to figure out what an inexperienced user can do without using a soldering iron.

Initial tests. Battery charge level and battery health.

The easiest thing to do is to remove the battery for 10 seconds and put it back.

If this, technically, turns out to be a difficult process, but you have a set of small-caliber screwdrivers and a hair dryer on hand - you can still carry out this procedure, the main thing is that in models where quick battery replacement is not provided, it can be attached with double-sided tape and its extraction will require additional heating with warm air. Take your time when using it, it is better to spend an extra ten minutes than to melt some important component and go broke to replace it.

An important point - the swelling of the battery clearly indicates the need to replace it. Do not try to operate a device with such a technical problem, it can lead to sad consequences. But, I must say that for ZTE smartphones, such a situation is extremely rare.

If the phone still does not start, try turning on the device with a direct connection to the mains with the battery removed (since its breakage may not be visually obvious).

If all these actions did not lead to the desired result, let's move on to the second point, but you should understand that this will entail data loss if you have not previously saved them to the card or made a backup in the cloud service.

The second step is to restart the system.

Hard reset to factory settings. The thing is universal, but if the contact list or some data on your ZTE is very important to you, I recommend contacting the ZTE service center, where experienced specialists can help you and avoid losing information.

To carry out this operation, you need to start the smartphone by simultaneously pressing the sound change keys and the power button. Depending on the firmware of your ZTE, try several combinations: sound +, sound -, both sound change keys ... the power key in either of them is required by default.

It was not possible to call the menu or the phone does not want to respond to pressing any buttons at all - this means that the question is mechanical and you need to contact the repair service specialists, since you will most likely need to replace the components, and it is better to entrust this process to specialists so as not to cause even more damage to the device.

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? Here's what you need is a ZTE factory reset. What is it? A hard reset is an operation that deletes all data (including settings, apps, calendars, pictures, etc.) on the ZTE Blade and restores the default settings that make your device look like it's coming straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to run faster, when there are some difficulties in the operation of the operating system. Here's how to reset your ZTE.

A soft factory reset and a hard factory reset are two methods you can use to factory reset your ZTE and restore your phone to be as good as new. Perhaps you want to reset your phone protection because you forgot your screen lock password. Or you want to restore factory settings by hard resetting your phone. Before restarting your Zmax 2, I suggest that you try performing a ZTE soft reset first. Wallpapers for Android.

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Press the ZTE main menu.

2. Tap Settings> Privacy.

3. Tap Factory Data Reset.

4. Tap Reset Phone. Check, remove SD card if you want to remove memory card.

5. Click Erase All.

Wait a few seconds, your phone will automatically reboot and ZTE will reset. If you see that your problem is still not fixed, you can try hard resetting your ZTE phone.

Hard reset ZTE to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then bring it back.

3. Press the volume up and power button at the same time until it vibrates, then release the power button, there will be ZTE recovery screen.

4. A couple of options will appear on the screen, select "Wipe data / Factory reset" using the volume key and confirm the selection with the power (power) button.

5. Then on the next screen select - delete all user data using the volume button, press the power button to confirm.

6. All data and ZTE cache will be erased automatically and a screen with a reboot system will appear, reset to factory defaults.

8. Your phone will turn off and restart.

Completed ZTE hard reset. So wait a few minutes. And then you will see that your smartphone is performing better than before.

• All music, videos, files and folders will be deleted automatically.
• Your entire contact list and history of calls or SMS-MMS chats will be automatically formatted from your smartphone.
• This means that all information will be deleted from your phones that you saved on your phone before.
• Therefore, I suggest you, before you reset your ZTE phone Zmax 2, please back up your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about ZTE hard reset or any tips or tricks to improve your Smartphone, mainly ZTE smartphones, please do not hesitate to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course, you are important to us.

It is a shame when a seemingly normal, working smartphone suddenly stops turning on, and if there is still important information there, then annoyance and fear that the data has been lost forever are added to the offense. What are the reasons for this behavior of the smartphone, why does the zte blade l5 not turn on, and what should be done to correct the situation?

Reasons why zte blade does not turn on

Regarding situations when a smartphone was accidentally or deliberately dropped from a height onto the asphalt, then drove over it in a car, and doused with water in the appendage. That is, the reasons that are clearly visible, and where it is necessary to completely disassemble the device, we will not. It often happens that the smartphone simply does not turn on for no reason, it seems like it worked, and that's it, it went out. We are not in a hurry to plan a trip to the service, first you should try to reanimate the gadget on your own, this will save money and time. So why won't the zte blade a5 pro turn on?

Common reason

In fact, in 80 percent of such cases, the problem lies very close, in the battery, it is simply not charged. It often happens that people forget about the smartphone for a while, and after they come to their senses, they try to unlock it, but it does not respond, because it automatically turned off - the battery has run out. It cannot be turned on, and when the smartphone is turned off, it does not show the battery charge. So some are suffering. And all you need to do is just turn on the charging, and wait ten minutes. Then you can turn it on.

There are some users who claim that they have charged the smartphone - that's just, and still the zte blade l3 does not turn on. Yes, this can be, because some batteries, when they are discharged too much, they cannot accept a charge without a special "kick". Even if the charging is on all day.

What to do

You need a special charge such as a frog. This device allows you to break through all obstacles in any battery, since charging takes place directly, without the participation of a smartphone. Take ten to fifteen minutes, and then the battery can be put into place in the smartphone and turn on regular charging.

Broken charging

Of course, it is imperative to check the performance of the charger itself, its malfunction is also a common reason why the zte blade l2 does not turn on. It's easy to check, you need another charge, and if the current goes, then your charger should be replaced immediately.

It also happens that the smartphone does not turn on, because it is simply not turned off, but freezes. In this case, removing the battery for a few seconds can help. It can bring your device to life. Of course, a gadget can have a design with a non-removable battery, but then there should be a small hole in the smartphone for a forced shutdown or reboot.

If your android phone samsung, xiomi, lenovo, asus, zte, huavei, sony and so on freezes and has a non-removable battery, this is not a big problem.

Modern Android phones have a hidden function to manually restart the operating system.

It consists in holding the power button on the device not for five seconds, as usual, but for 20-30 seconds.

Such a prolonged action actually causes the phone to reboot. Of course, many owners of mobile devices with a non-removable battery, if the phone freezes, feel completely helpless. This is why this guide was created.

There is absolutely no need for you to panic in such a situation. Just keep holding the shutdown button for longer than the normal period of time.

Sometimes it is necessary to simultaneously press and hold one more (volume down and power down) or even two buttons.

If nothing happened - there is absolutely no reaction, then you just have to wait until the battery is completely discharged.

Of course, I don’t want to wait, but it’s better than carrying it for repairs to be disassembled and rebooted. Let's dig a little deeper.

How I rebooted my frozen phone with a non-removable Samsung A3 battery

Although phones are improving all the time, sometimes progress can not play into our hands. This happened with devices with a non-removable battery.

Previously, in the event of a freeze, I quickly pulled out the battery, plugged it in again, turned it on and everything - the problem is solved.

Today, such resuscitation will not work on many android devices, as, for example, on my samsung a3.

I was helped by the option of a combination of buttons "Power" + "Volume Down" for about ten seconds. The device has turned off and on.

Why android phone freezes and won't reboot

If the phone is frozen and does not respond to any touch, then this is either a system glitch or a screen problem - in the touchscreen.

In practice, the phone freezes most often due to applications - they may not have enough RAM and some kind of error may occur.

If the battery is removable, then don't fuss, just pull it out for a minute - a 100% working way to get rid of freezes.

When the classic version does not work, the forced one remains: pressing the "Off" and "Volume" buttons at the same time (what volume and even two at once depends on the device - xiomi, samsung, asus, sony, zte, lenovo, huavei)

What to do with an android phone to get rid of freezes

Sometimes the phone can be restarted, but the freeze keeps coming back. Then try

One of the main reasons for freezing is low performance (weak device), so in such devices it is advisable not to use effects, such as animated wallpapers - they heavily load memory and processor.

Also, do not overload even the memory card - this also contributes to freezing. Optimal balance when 10 percent of memory remains free.

NOTE: manufacturers of phones with an unearthly battery are well aware that the phone can freeze and not react to anything, therefore, they provide a way out of this situation - holding the shutdown button until the android OS reboots. Good luck.