Safe mode on android how to disable fly. Disable YouTube Safe Mode. Removing malware

Any advanced user of the Windows operating system knows about the existence and purpose of Safe Mode. However, few people realize that there is such a mode in the Android mobile operating system.

Safe mode for Android is a special mode in which you can boot your phone. When you boot your Android device in safe mode, only system applications will start. Thus, you can easily boot a device that freezes or slows down a lot from installed applications.

After loading in safe mode, you can remove everything that interferes with the operation of the Android device and return to normal operation. But, in some such cases, users have difficulty returning to normal operation of the device. In this article, we will tell you how to enable and disable Safe Mode on Android.

How to remove or disable Safe Mode on Android

Let's start with how to disable Safe Mode on Android, since this is what causes the most difficulties. There are several ways to remove Safe Mode on Android.

Method number 1. Disconnect the battery for 30 seconds, then install it back and try to boot the Android device in normal mode.
Method number 2. Restart the device and hold down the "Home" button while turning it on until the device is fully loaded.
Method number 3. Restart the device and while turning on, hold down the volume down button and hold it until the device is fully loaded.
Method number 4. Restart the device and while turning on, hold down the volume up button and hold it until the device is fully loaded.

How to enable Safe Mode on Android

If you have Android 4.1 or a newer version, then in order for Android you need to press the power button of the device. After that, a window will appear in front of you, in which you can turn off the power to the device, or turn off the sound. Here you need to click on the "Turn off the power" item and hold your finger until a message appears prompting you to switch to safe mode.

After prompting you to switch to safe mode, click on the "OK" button.

After that, the Android device will reboot into safe mode. After loading, an inscription will appear at the bottom of the screen informing that the device is working in safe mode.

This is done in such a simple way, but you already know how to turn off safe mode on Android.

If you are using Android 4.0 or an older version of this operating system, then in order to enable safe mode, you just need to turn off the device, and when you turn it on, wait for the manufacturer's logo to appear and hold down the volume up and down buttons. These buttons must be pressed at the same time and held until the Android device finishes loading.

Would you like to add something to the article? Share in the comments.

Safe mode is available in most modern operating systems - Android, Windows, iOS, Linux, etc. It is needed so that the user can diagnose a problem with the operating system and fix it (in the event that the problem is caused by the installation of an application).

About safe mode on Android

On Android devices, safe mode is a "naked" Android, where the basic functions of the operating system are available, as well as applications installed on the device by default, or downloaded from the Play Market from trusted developers. Internet connection does not work in this mode either.

You can enter Safe Mode in the following ways:

If everything is clear with entering the safe mode, then the procedure for exiting it may have its own characteristics.

Method 1: Removing the battery

This method will not work for you if the design of the tablet or smartphone does not allow you to disassemble the case and carry out any manipulations inside it. It is also not recommended to use this method too often.

The instruction looks like this:

Method 2: Reboot

The way is to start a reboot of the device. When the Android or manufacturer logo appears, press the home button (in some models, the power button). After that, the device should boot normally.

Method 3: Standard exit from safe mode

On most devices, you can exit safe mode in the same way as you enter:

Using these methods, you can exit Safe Mode on your tablet at any time. If you cannot exit this mode at all, then you will have to reset the settings to the factory defaults. Fortunately, such problems are almost never encountered.

On a smartphone or tablet, many problems in the form of freezes and glitches can be solved by enabling Safe Mode. And when everything is eliminated, you need to get out of it again. It turns out, alas, not always. And in some cases, returning the phone to normal mode becomes a problem. Sometimes users reboot their devices dozens of times, but this does not give any result.

If it has become an impossible task for you, then be sure to read this article.

The android mobile OS has a safe mode. It allows you to boot the device so that only system applications are active. Due to which it is possible to solve problems that, for example, arose during its use.

Let's explain more clearly: your smartphone from htc, xiaomi, zte, huawei, lenovo, fly or any other manufacturer hangs and glitches badly, its sensor does not react correctly, graphic artifacts appear, etc. In this case, switching to safe mode will allow you to start the device like this that any personalization done on the phone, or user preferences, disappeared from it. Accordingly, without glitches and freezes, it will be possible to get rid of "strange" applications and delete unnecessary files that load the system and cause unstable operation of the device.

However, after the operations done, you need to return the gadget to normal mode. But not everyone succeeds in doing this. It also happens that a smartphone or tablet is constantly restarted with an active "safe mode". As a result, turning it off becomes a whole problem.

Option number 1

The easiest way to disable Safe Mode on Android is to restart your device. However, this method is not always effective. Therefore, if your smartphone or tablet continues to boot from safe mode, then try the following:

Turn off the device.
Gently open the back cover and remove the battery from it for about a minute. It is recommended to remove the SIM card as well.
Replace the battery. Return the SIM as well.
Turn on your device.

Did it help? If not, try the next option. In addition, please note that the described method is not suitable for some devices from Lenovo, Alcatel, Asus, Fly, Sony, Micromax and many others. others due to the fact that they are equipped with non-removable batteries.

For reference! Why does removing the battery help? It's simple. Safe mode sometimes does not turn off due to the fact that information about it is stored in short-term memory, which stores data about the current time, date, time zone, etc. Removing the battery literally for half a minute, you will reset all data, including the need to startsafe mode.

Option number 2

There is one more simple way. It often helps to disable safe mode on samsung, dexp, lg and bq devices. Sometimes it works on gadgets of other popular brands. All that is required for this:

Restart the device.
When the system boots, hold down and hold the Home key until the startup process is complete.

However, do not forget that some smartphones do not have a built-in device reboot function. If you are the owner of such a device, then just turn it off and then turn it on while holding the "Home" button.

For reference! In some versions of the OS, a message is sent to the user when entering safe mode. So check the notification shade. It sometimes reflects a special reminder. Tap on it and the system itself will offer to disablesafe mode... The device will automatically reboot and start in normal mode.

Option number 3

On some Sony Xperia and Samsung there is a specific way to disable safe mode. To return the device to normal mode, you need:

Turn off the gadget.
Turn it on after a few seconds.
Wait until the splash screen with the brand's inscription appears at boot, and hold down the volume up button, holding it until the device is fully turned on.

After these manipulations, your samsung galaxy a3, a5, etc. will boot as usual.

Option number 4

If the above methods did not help, then uninstall the last application (or several recently installed programs) that was installed on your phone or tablet. You know how this is done, but we will remind you just in case. You can use the application menu in the "Settings" for this. Or just hold down the program icon and drag it to the trash can.

After the performed manipulations, immediately restart the device.

Option number 5

You can remove safe mode by returning to factory settings on your tablet or phone. True, this method is best used in extreme cases, when no "dances with tambourines" help. After all, there is a risk of losing all information available on the device.

So be sure to back up all your files and contacts from your phone book before doing a factory reset. As for the procedure itself, then:

We go into the settings of the phone or tablet.
We find the item "Backup and reset" and tap on it.
We start the backup.
Then we select the option "reset to factory settings". We confirm this action.
We are waiting for the completion of the return to the initial settings.

Now your device will be like new. At the same time, the safe mode will be disabled on it.

This article will show you how to disable Safe Mode on your Android device. You can find a solution to the problem of constant reboot with activated safe mode. We have covered 7 ways to reset Safe Mode, problems that may arise and what to do if all else fails. Detailed instructions that will solve the problem in 9 out of 10 cases.

Sometimes a situation arises when a phone or tablet on Android needs to be loaded not in normal, but in safe mode. For example, when it starts to freeze and glitch. In such a situation, safe mode is used as a diagnostic tool. In most cases, putting the gadget into safe mode allows you to find and solve the problem, but sometimes it doesn't. Approximately 5-10% of users have a situation when it is impossible to return to normal mode and the phone is constantly restarted with active safe mode.

Safe Mode on Android - why you need it and how to enable it

Safe mode is needed when, as a result of interference with the firmware or the operating system, a system failure occurs and the phone does not work correctly, there are crashes, graphic artifacts or severe slowdowns. If you put the device in this mode, only system applications will start and the gadget's performance will resume.

If you are looking for an answer to the question of how to disable Safe Mode on Android, then you are faced with one of the above problems. You entered “safe mode” and then tried to enter normal operation mode and failed to do so. To carry out this operation, use one of the following methods.

We remove safe mode by means of Android

To find out if Safe Mode is on or not, look at the bottom left corner of the screen. It should display a shaded rectangle with a corresponding caption. If not, do the following:

Through the menu, open a window that displays a button to turn off, restart, or put the phone in airplane mode. Or hold down the power off key of the device for a few seconds until the desired window appears;
Press the “power off” button and hold until the message “go to safe mode? All third-party applications will be disabled ... ”.

If this inscription appears, then the phone is in normal operation mode and you do not need to turn off safe mode. If it does not appear, then your phone is booted in safe mode. To disable “safe mode”, simply reboot the device.

Turn off Android safe mode with a combination of buttons

Sometimes a reboot does not help and the gadget constantly boots in safe mode. Most often this happens due to the failure of factory applications that are configured to autostart. On some phones, “safe mode” can be disabled as follows:

Turn off the device;
Hold down the volume toggle button (down) and the power button. Hold both keys until the phone goes into Recovery. Now take out the battery and try to turn on the device;
If everything went well, the gadget should boot normally.

Advice: do not use this method if the volume toggle button does not work or is stuck. Otherwise, the phone will always boot into safe mode. After that, only a flashing will help.

Open the system application “settings”. Go to the “restore and reset” or “backup and reset” section. Click the “factory reset” button. Wait for the device to recover to its default state and reboot.

If you are unable to reboot in “safe mode”, use the following instruction:

Turn off the device;
Simultaneously press the volume down button (on gadgets from Prestigio, HTC, Motorola, Huawei, LG) and the on / off button. If you need to turn off safe mode on Android on Samsung, hold down the “Home” button and the volume control button up;
Wait for Recovery to load;
In the menu that appears, select “reboot” or “reset device” or “erase data” (differently on different firmware);
Use the sound setting keys to select this item and confirm by pressing the power button.

After that, your gadget should reboot, and the settings are reset to factory settings. Do not try to turn off or remove the battery until the bare version of Android is loaded, otherwise the device will have to be reflashed or carried to the SC.

Other ways to turn off safe mode in android

If the above answers to the question of how to remove safe mode on Android did not solve your problem, try using other methods that sometimes help:

Remove the battery and put it back in after a few minutes. Perhaps safe mode is not disabled due to the fact that information about it is stored in short-term memory, which is responsible for temporarily storing the current time, date, time zone after removing the battery;
Remove recently installed applications. The problem with disabling Safe Mode may be due to a crash in one of the apps you recently downloaded. This is rare, but it does happen sometimes;
Remove applications that load into RAM immediately after loading. In most cases, they are the reason why it is impossible to exit safe mode. Remove such programs and try restarting your device. You can determine which application caused the problem by typing - erase the software one by one until you achieve the desired effect.

Not a single method of returning to normal mode helped? Take the gadget to a service center or change the firmware yourself. Most likely, there was a firmware failure on your phone. It sometimes happens after an update, after installing an unofficial firmware version, after receiving root rights and improperly modifying system files, etc. In this case, you will not be able to roll back the changes without a computer and replacing the firmware.

3 more useful articles:

Due to the fact that more and more phones and tablets on the Android platform have begun to completely unexpectedly switch to Safe Mode, many users are interested in how to disable Safe Mode.

In general, this very mode is needed in order to stop the operation of applications that are not working correctly.

But in some cases, it turns on on its own, and turning it off is quite difficult. In addition, on the Internet you can find many ways that supposedly allow you to do this, but in practice everything turns out to be quite the opposite.

Therefore, we have chosen five methods that actually work and disable Safe Mode on Android devices.

1. Method number 1. Reboot

In general, the device goes into safe mode due to a malfunction of an application, but rebooting often stops it and automatically wakes the phone out of this mode.

There are several ways to do this.

You should not use them at the same time, because only one of them will work on your device.

It is about this:

If in the menu that opens after swiping up, there is an item "Turn off the power" or something similar, click on it. Then the device will be turned off.

Hold down the keypad lock button and select "Shutdown" from the options.

After the phone is turned off, remove the battery from it and wait at least 30 seconds, then repeat all operations in reverse order, that is, insert the battery and turn on the phone.

As for the aforementioned 30 seconds, then during this time the capacitors are completely discharged and the device starts to work, as it were, from scratch.

Some people write that it is better to wait about a minute. In any case, 30 seconds is the minimum time, but you shouldn't wait more than 5 minutes - it makes no sense.

Note: If the design of the phone does not allow removing the battery, just wait a while after turning it off.

2. Method number 2. Alternative

This method does not work on all devices, so if it does not work in your case, you should not despair, go to the third one.

And it consists in pressing and holding the power button and the button at the same time, which makes the volume of the device lower.

Below is an example of the location of these buttons on a Samsung Galaxy J7 phone. Here on the right is the power button and on the left is the volume down button.

Important: This method should only be used if the volume control button is intact and intact. Otherwise, such a combination will cause a cyclic (permanent) reboot.

3. Method number 3. Removing applications

So, the phone can go into safe mode due to some applications, or rather, their incorrect operation, so this method looks quite logical.

And it consists in simply removing all applications that you recently installed.

To do this, you need to do the following:

Go to the settings, then to the "Applications" item.
Click on the desired application. By default, they will be sorted by installation date, so you need to uninstall one of the first applications in the list.
On the application page, click on the "Delete" button.

If uninstalling the recently installed apps doesn't help, it's worth trying to uninstall all apps one at a time until the device stops going into Safe Mode.

But in this case, a problem arises: not everyone wants to delete all applications, because important data may be lost.

Therefore, if removing the last installed applications does not help, it is better to resort to the fourth method on our list, which is more radical.

4. Method number 4. Phone reset

This method consists in completely erasing all information from the device. Then the information that forced him to go into safe mode will also be removed.

The most effective way to reset your phone is as follows:

Restart the phone and, when it just starts to turn on, hold down the volume down button. Thanks to this, it will go to the system menu.
In the system menu, select the "wipe data / factory reset" item. The choice in this case is made by the volume keys and the power button of the phone.
In the next window, select the "yes ..." item. There is a simple query "Do you really want to delete all data from the device". We answer "Yes".
After that, the deletion will take place directly. Some time will pass, which depends on the amount of information on the device. Then the system menu will reappear, which we saw from the very beginning. There you should select the item "reboot system ...". The system will reboot and start up in normal, normal mode.

Of course, we do not want all data to disappear from the phone, so before performing the above procedure, you need to save all important documents somewhere.

It is best to use a regular computer for this - connect your phone to it via USB and reset all photos, videos, documents and other files.

The same can be done with any cloud storage.

You shouldn't worry about purchased applications and progress in them, all this will be saved in your Play Market account.

You just need to reinstall all programs.

5. Method number 5. Using the Home button

This method also does not always work, but you can try.

It consists in starting a reboot of the device and when it starts to boot, hold down the "Home" button and do not release it until the device boots up again.

If the button is touch sensitive, hold it down as soon as it appears on the screen. If there is no reboot function, just turn off your phone and start turning it on.

The first method can be seen clearly in the video below.