The floppy drive on my computer does not open what to do. Why the floppy drive does not open - what to do. Correction of mechanical problems

Usually, the drive does not open exactly at the moment when it must be urgently opened. It's even worse than yours.

You need to pull it out and give it away, but it won't come out. What to do? Why did this happen? Don't panic, the problem may be temporary. Restart your computer and try again. Did not help? Drive won't open further?

Opening a non-working CD drive

Then restart your computer after this operation, the disk should be visible in the system again. Confirm the operation and restart your computer. In the case of netbooks, we can find an additional driver on the manufacturer's website and update it. Among the many practical computer guides, you will find information on how to fix system crashes, how to optimize and tune your Internet connection, and what to offer when purchasing your computer equipment... Interesting online games and full versions downloadable games will surely let you forget about boredom.

Try to open regular means... Click "start" = >>, "computer" and on the drive icon (after clicking the left mouse button) select the "eject disc" option.

No results? Let's go ahead. Take a thin object, like a needle, and look for a small hole on the drive itself, just under the needle.

Insert it and press. This is an emergency opening of the drive, in most cases it opens.

We also present a list of valuable websites, not only for entertainment, but also for various activities. We don't need any software for creating presentations, editing videos, editing graphics or converting media - just the right app in the cloud. We also invite you to add comments using the special form located directly below each article. Thanks to the comments, we learn your opinions and suggestions related to the development of the portal.

We will find out what mistakes should be avoided in the future, and what articles you expect. Both of these drives are functionally equivalent. No need to pre-place the disc in the drive tray. Before proceeding with troubleshooting, first make sure that the drive you are using is supported by your computer. Inserting a disc of an irregular shape or size into a drive that does not support the disc may damage the drive.

Has it helped or your drive won't open yet? Impatience of course grows, calm down, it will open up where to go.

Most likely, you installed the disk incorrectly in a hurry - this happened to me three times.

Take a sharp object, like a knife with a blunt end, press the drive open button and carefully try to help it open from all sides, just do not overdo it by pressing.

Standard round insert with a diameter of 120 mm

Examples of custom sizes or shapes that are not supported

Solving specific problems. Here are some of the possible symptoms. Performing the tasks assigned to the corresponding symptoms will determine whether the source of the problem is the disk or the media being used. Before using the disc, make sure it is not cracked, scratched, or damaged. Also pay attention to inner ring plate, which must be different and equal. A physically damaged plate can become stuck or damage the drive.

I hope you have resolved the problem and your floppy drive will open. No, then we will use the last option. We will independently disassemble our personal PC or go to the service.

The difficulty in telling how to disassemble a computer or laptop in order to remove the drive is that in all models it happens in its own way.

It is very good if you have, for example, an asus laptop. I must say this manufacturer makes laptops with very good available ways repair and connection of additional devices.

The drive accepts discs but does not read them or automatically ejects them

If the disc is warped or bent in any way, do not use it as it may become stuck in the drive. If the drive is having difficulty accepting a disc or stops halfway through, check carefully for any labels that might interfere with it. If there are no partially untagged marks on the disc, try re-inserting the disc a few more times. Try a different drive to see if the issue is media related. Make sure you insert the disc deep enough to activate the drive mechanism. The disc must be almost completely in the drive before the drive activates the gripper. If you don't insert the disc deep enough, the drive will eject the disc back. When the disc is fully inserted, wait a few seconds or two for the drive to start. If the drive is constantly ejecting inserted discs or making an appointment.

The drive does not eject the disc, or it is slow

If the disc ejects the disc slowly or with difficulty, insert and eject the disc several times in a row. Make sure that there are no stickers on the disc or that the thickness of the disc does not increase in any other way. If the disc does not eject, try dragging the disc icon to the trash can. If the disc won't eject, try restarting your computer while holding down your mouse or trackpad while booting.

The drive is loud or vibrates

Note that a certain amount of noise and vibration is associated with normal operation of the optical drive, in which the disc spins very quickly. If you think the drive is making excessive noise when inserting or removing discs, try reinserting and ejecting the disc to resolve the issue. Try using other discs to see if the problem is with a specific disc or disc type, or the source is the disc itself. Uneven loading of the disc, such as labels or stickers, may cause additional noise or vibration while the disc is in the drive. Vibration due to optical drive operation may increase when using the computer on a surface that is not firm and horizontal enough. Make sure all of the plastic feet on the computer are installed as they may not bump the surface. Note that the actuator should only operate in a horizontal position and may be louder if attempted in a different position. Lifting or moving the device while reading a disc may result in a loss of balance. Any damage to the drive or media caused by using the disc in this manner is not covered by the warranty. One level of noise and vibration is natural, but if you think the noise or vibration generated by the drive is not normal.

Make sure the disc in the drive is not warped.
To do this, place the disc on a flat surface, label side down.
Do not use boards with additional items glued to the surface.
Make sure the drive is not facing up.
Select System Information from the menu.
Remove the shortcut if possible.
If the disc does not eject, try pressing the eject button on your keyboard.
This is not a concern.

We will find it by entering one name in any search engine.

All you have to do is turn your laptop over (usually it always does) and unscrew a few screws in the drive area. Then pull out the tray and disconnect the ribbon cable. You can even change the drive yourself to another one.

In other models, such operations can also be performed, only in most cases you have to remove the keyboard and disconnect the drive securing screw.

Such a technical operation requires great care, otherwise damage will occur, which cannot be repaired without workshops.

A few more reasons and how to fix it can be found by clicking on the link (above)

Removing the drive is much easier on a computer. We unscrew the wall, side or rear, like anyone else, disconnect the drive cable, unscrew the screw and take it out. All that is described above concerns the problem of how to get the disc if the drive does not open.

If you pulled out the drive and saw that it was damaged, I would not have fooled my head with the repair, but installed a new one. Firstly, most likely, you will not be able to fix it yourself, and no one will be able to do this for free in the workshop.

Today in the store a new one costs about $ 15. If you consider that in the workshop, just for being pulled out and inserted, they will take at least $ 5 from you, not to mention repairs, and besides, sometimes you have to go there and you will have to spend almost a whole day, then come again to pick up - then draw conclusions yourself.

I hope now why the floppy drive does not open and you know how to open it.

Did not help? Drive won't open further? I hope now why the floppy drive does not open and you know how to open it. All that is described above concerns the problem of how to get the disc if the drive does not open. There are times when the drive does not open on the computer, that is, you cannot remove the disc from the CD / DVD drive a.

About the problem that is associated with the opening of the drive. Suppose you press this poor button, but nothing happens, the drive continues to work and do something, but does not want to open any of it. If this does not help, then try the third option.

Then try to open it using the previous methods. If that didn't help either. The drive may also stop working due to a sudden power surge. It happens that the button for ejecting the disc from the drive is simply jammed, and it is not pressed. All these problems are, in fact, very simple to solve. It is also intended for emergency ejection of disks from the drive. As you press down on the lever, the drive will slowly slide out. If you: recently repaired your computer, dropped your computer or hit it, then the ribbon cable from the floppy drive may be disconnected.

See you soon! Usually, the drive does not open exactly at the moment when it must be urgently opened. What to do? Why did this happen? Try to open it with regular means. No results? This is an emergency opening of the drive, in most cases it opens.

I hope you have resolved the problem and your floppy drive will open. Then pull out the tray and disconnect the ribbon cable. You can even change the drive yourself to another one. Removing the drive is much easier on a computer. We unscrew the wall, side or rear, like anyone else, disconnect the drive cable, unscrew the screw and take it out. It all started with the fact that when opening the drive wedged and opened only after several attempts. As a result, it all ended with the fact that the DVD drive stopped opening completely and then completely disappeared from the system (although it was detected in BIOS).

Floppy drive not working?

HDD), but the disk was not detected in it either. Everything is clear - the point is in the drive itself. The first thing you can do is to use the mechanism for manually opening the drive. But using this method is rather inconvenient, and in some cases this requires partial disassembly of the case, so let's move on to finding out the reason why the drive does not open. If after that the DVD drive opens and closes normally, then the easiest way to fix the problem is to leave the disc in the drive, with the working side up (so the drive will not see it and will not start every time the system starts).

It happens that in the life of a computer user, you come across one rather frequent problem, which is probably already known to everyone, but nevertheless it is worth mentioning about it. It is sometimes a shame if a disc is stuck in it or something else unexpected has happened and when you try to press the open button, you understand that the CD-ROM on your computer refuses to open.

1. From operating system, go to “My Computer” and click right click mouse on the icon of your CD drive and click on the "Eject" command, thereby forcibly forcing it to open. If nothing came of it, then you can resort to the second method with the help of surgical intervention.

You also need to take a needle or an unbent thin paper clip and insert it into the small hole until it stops. This should open the CD-ROM. 3. It consists in trying to disconnect the power and interface wires from the drive with the computer turned off and turn them on again. 4. Then you can carefully disassemble the CD-ROM and try to find some mechanical problem inside the drive structure.

Hello my dear readers. Today I want to talk with you about a specific problem. This can happen for various reasons. For example, you have a power outage at your home, and some important disk is left in the drive, which is immediately required to be returned.

How to open the floppy drive

On my old drive, I had cases when the tray moved out quite a bit, buzzed for a while and moved back. To eject the disc in emergency mode, you need some solid wire. There is a small hole on the front panel of any drive, you can clearly see it in the figure below.

Carefully insert the needle into the hole until we feel that we have rested against the lever. You must hold the needle straight to get on the lever inside the drive. After about 1.5-2 cm, this very lever will be felt. You need to gently press down on it with a needle. Continue pressing until you can grasp the tray with your fingers. Now, by hand, we pull the tray out to the end, calmly remove the disc from it and gently push it back, or you can press the button to close the tray. The most important thing with this emergency retrieval drive out of the drive - be careful not to damage the drive mechanism inside.

You can read more about this in the article: "Why the DVD drive does not want to read discs" (information is almost at the very end of the article). You need to pull it out and give it away, but it won't come out. Don't panic, the problem may be temporary. Let's go ahead. Take a thin object, like a needle, and look for a small hole on the drive itself, just under the needle.

Has it helped or your drive won't open yet? Impatience of course grows, calm down, it will open up where to go. Take a sharp object, like a knife with a blunt end, press the drive open button and carefully try to help it open from all sides, just do not overdo it by pressing.